netdev - RE: [PATCH net 0/3] Add I2C bus lock for Wangxun

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <020f01daf827$d765ffd0$8631ff70$@trustnetic.com>
Date: Tue, 27 Aug 2024 10:21:36 +0800
From: Jiawen Wu <jiawenwu@...stnetic.com>
To: "'Andrew Lunn'" <andrew@...n.ch>
Cc: <andi.shyti@...nel.org>,
	<jarkko.nikula@...ux.intel.com>,
	<andriy.shevchenko@...ux.intel.com>,
	<mika.westerberg@...ux.intel.com>,
	<jsd@...ihalf.com>,
	<davem@...emloft.net>,
	<edumazet@...gle.com>,
	<kuba@...nel.org>,
	<pabeni@...hat.com>,
	<rmk+kernel@...linux.org.uk>,
	<linux-i2c@...r.kernel.org>,
	<netdev@...r.kernel.org>,
	<mengyuanlou@...-swift.com>,
	<duanqiangwen@...-swift.com>
Subject: RE: [PATCH net 0/3] Add I2C bus lock for Wangxun

On Mon, Aug 26, 2024 10:34 AM, Andrew Lunn wrote:
> On Mon, Aug 26, 2024 at 10:04:42AM +0800, Jiawen Wu wrote:
> > On Mon, Aug 26, 2024 9:33 AM, Andrew Lunn wrote:
> > > On Fri, Aug 23, 2024 at 11:02:39AM +0800, Jiawen Wu wrote:
> > > > Sometimes the driver can not get the SFP information because the I2C bus
> > > > is accessed by the firmware at the same time.
> > >
> > > Please could you explain this some more. What firmware?
> >
> > It's the firmware of our ethernet devices.
> >
> > > There some registers which are clear on read. They don't work when you
> > > have multiple entities reading them.
> >
> > I'm not trying to multiple access the I2C registers, but these registers cannot
> > be accessed by other interfaces in the process of reading complete information
> > each time. So there is a semaphore needed that locks up the entire read process.
> 
> More details please.
> 
> Linux assume it is driving the hardware. Your firmware cannot be
> touching any registers which will clear on read. QSFP states that
> registers 3-31 of page 0 are all clear on read, for example. The
> firmware should also not be setting any registers, otherwise you can
> confuse Linux which assumes registers it set stay set, because it is
> controlling the hardware.
> 
> Your firmware also needs to handle that Linux can change the page. If
> the firmware changes the page, it must restore it back to whatever
> page Linux selected, etc.
> 
> The fact you are submitting this for net suggests you have seen real
> issues. Please describe what those issues are.

The error log shows:

[257681.367827] sfp sfp.1025: Host maximum power 1.0W
[257681.370813] txgbe 0000:04:00.1: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:02:02.0 (capable
of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[257681.373364] txgbe 0000:04:00.1 enp4s0f1: renamed from eth0
[257681.434719] txgbe 0000:04:00.1 enp4s0f1: configuring for inband/10gbase-r link mode
[257681.676747] sfp sfp.1025: EEPROM base structure checksum failure: 0x63 != 0x1f
[257681.676755] sfp EE: 00000000: 03 04 07 10 00 00 01 00 00 00 00 06 67 02 00 00  ............g...
[257681.676757] sfp EE: 00000010: 1e 0f 00 00 46 69 62 65 72 53 74 6f 72 65 20 64  ....FiberStore d
[257681.676759] sfp EE: 00000020: 20 20 20 20 00 00 1b 21 53 46 50 2d 31 30 47 53      ...!SFP-10GS
[257681.676760] sfp EE: 00000030: 52 2d 38 35 20 20 20 20 41 20 20 20 03 52 00 1f  R-85    A   .R..
[257681.676762] sfp EE: 00000040: 00 81 cd 5b df 25 0a bd 40 f6 c6 ce 47 8e ff ff  ...[.%..@...G...
[257681.676763] sfp EE: 00000050: 10 d8 24 33 44 8e ff ff 10 41 b0 9a ff ff ff ff  ..$3D....A......
 
It looks like some fields are read incorrectly. For comparison, I printed the
 SFP info when it loaded correctly:

[260908.194533] sfp EE: 00000000: 03 04 07 10 00 00 01 00 00 00 00 06 67 02 00 00  ............g...
[260908.194536] sfp EE: 00000010: 1e 0f 00 00 46 69 62 65 72 53 74 6f 72 65 20 20  ....FiberStore
[260908.194538] sfp EE: 00000020: 20 20 20 20 00 00 1b 21 53 46 50 2d 31 30 47 53      ...!SFP-10GS
[260908.194540] sfp EE: 00000030: 52 2d 38 35 20 20 20 20 41 20 20 20 03 52 00 1f  R-85    A   .R..
[260908.194541] sfp EE: 00000040: 40 63 bd df 40 8e ff ff 10 41 b0 9a ff ff ff ff  @c..@....A......
[260908.194543] sfp EE: 00000050: 10 58 5b 29 41 8e ff ff 10 41 b0 9a ff ff ff ff  .X[)A....A......
[260908.198205] sfp sfp.1025: module FiberStore       SFP-10GSR-85     rev A    sn G1804125607      dc 180605

Since the read mechanism of I2C is to write the offset and read command
first, and then read the target address. I think it's possible that the different
offsets be written at the same time, from Linux and firmware.