netdev - [PATCH net-next 3/3] selftests: lan743x: Add testcase to check throughput of lan743x

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240903221549.1215842-4-mohan.prasad@microchip.com>
Date: Wed, 4 Sep 2024 03:45:49 +0530
From: Mohan Prasad J <mohan.prasad@...rochip.com>
To: <netdev@...r.kernel.org>, <davem@...emloft.net>, <kuba@...nel.org>
CC: <shuah@...nel.org>, <bryan.whitehead@...rochip.com>,
	<mohan.prasad@...rochip.com>, <UNGLinuxDriver@...rochip.com>,
	<edumazet@...gle.com>, <pabeni@...hat.com>, <linux-kernel@...r.kernel.org>,
	<linux-kselftest@...r.kernel.org>, <horms@...nel.org>,
	<brett.creeley@....com>, <rosenp@...il.com>
Subject: [PATCH net-next 3/3] selftests: lan743x: Add testcase to check throughput of lan743x

Add testcase to check TCP throughput of lan743x network driver.
Test uses iperf3 to do performance testing of the driver.
TCP data at different speeds is sent, received and verified.

Signed-off-by: Mohan Prasad J <mohan.prasad@...rochip.com>
---
 .../net/hw/microchip/lan743x/lan743x.py       | 33 +++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/tools/testing/selftests/drivers/net/hw/microchip/lan743x/lan743x.py b/tools/testing/selftests/drivers/net/hw/microchip/lan743x/lan743x.py
index 59f0be2a7..a3dcf7896 100755
--- a/tools/testing/selftests/drivers/net/hw/microchip/lan743x/lan743x.py
+++ b/tools/testing/selftests/drivers/net/hw/microchip/lan743x/lan743x.py
@@ -3,6 +3,7 @@
 
 import time
 import re
+import json
 from lib.py import ksft_run, ksft_exit, ksft_pr, ksft_eq
 from lib.py import KsftFailEx, KsftSkipEx
 from lib.py import NetDrvEpEnv
@@ -75,6 +76,38 @@ def test_network_speed(cfg) -> None:
             time.sleep(5)
             verify_speed_and_duplex(cfg.ifname, speed, duplex)
 
+def test_tcp_throughput(cfg) -> None:
+    speeds = ["10", "100", "1000"]
+    """Test duration in seconds"""
+    test_duration = 5
+    target_ip = cfg.remote_addr
+
+    for speed in speeds:
+        set_speed_and_duplex(cfg.ifname, speed, 'full')
+        time.sleep(5)
+        verify_link_up(cfg.ifname)
+        send_command=f"iperf3 -c {target_ip} -t {test_duration} --json"
+        receive_command=f"iperf3 -c {target_ip} -t {test_duration} --reverse --json"
+        send_result = cmd(send_command)
+        receive_result = cmd(receive_command)
+        if send_result.ret != 0 or receive_result.ret != 0:
+            raise KsftSkipEx("No server is running")
+
+        send_output = send_result.stdout
+        receive_output = receive_result.stdout
+
+        send_data = json.loads(send_output)
+        receive_data = json.loads(receive_output)
+        """Convert throughput to Mbps"""
+        send_throughput = round(send_data['end']['sum_sent']['bits_per_second'] / 1e6, 2)
+        receive_throughput = round(receive_data['end']['sum_received']['bits_per_second'] / 1e6, 2)
+
+        ksft_pr(f"Send throughput: {send_throughput} Mbps, Receive throughput: {receive_throughput} Mbps")
+        """Check whether throughput is not below 0.9 times the set speed"""
+        threshold = float(speed) * 0.9
+        if send_throughput < threshold or receive_throughput < threshold:
+            raise KsftFailEx("Throughput is below threshold")
+
 def main() -> None:
     with NetDrvEpEnv(__file__) as cfg:
         ksft_run(globs=globals(), case_pfx={"test_"}, args=(cfg,))
-- 
2.43.0