lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240906133951.3433788-3-niklas.soderlund+renesas@ragnatech.se>
Date: Fri,  6 Sep 2024 15:39:50 +0200
From: Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
To: Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Stefan Eichenberger <eichest@...il.com>,
	Dimitri Fedrau <dima.fedrau@...il.com>,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
	netdev@...r.kernel.org
Cc: linux-renesas-soc@...r.kernel.org,
	Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
Subject: [net-next 2/3] net: phy: marvell-88q2xxx: Make register writer function generic

In preparation to adding auto negotiation support to mv88q2110 move and
rename the helper function used to write an array of register values to
the PHY.

Just as for mv88q2220 devices this helper will be needed to for the
initial configuration of the mv88q2110 to support auto negotiation.

The function is moved verbatim, there is no change in behavior.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
---
 drivers/net/phy/marvell-88q2xxx.c | 40 +++++++++++++++----------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c
index 850beb4b1722..31f8c976e387 100644
--- a/drivers/net/phy/marvell-88q2xxx.c
+++ b/drivers/net/phy/marvell-88q2xxx.c
@@ -174,6 +174,21 @@ static const struct mmd_val mv88q222x_revb1_revb2_init_seq1[] = {
 	{ MDIO_MMD_PCS, 0xfe11, 0x1105 },
 };
 
+static int mv88q2xxx_write_mmd_vals(struct phy_device *phydev,
+				    const struct mmd_val *vals, size_t len)
+{
+	int ret;
+
+	for (; len; vals++, len--) {
+		ret = phy_write_mmd(phydev, vals->devad, vals->regnum,
+				    vals->val);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
 static int mv88q2xxx_soft_reset(struct phy_device *phydev)
 {
 	int ret;
@@ -724,33 +739,18 @@ static int mv88q2xxx_probe(struct phy_device *phydev)
 	return mv88q2xxx_hwmon_probe(phydev);
 }
 
-static int mv88q222x_write_mmd_vals(struct phy_device *phydev,
-				    const struct mmd_val *vals, size_t len)
-{
-	int ret;
-
-	for (; len; vals++, len--) {
-		ret = phy_write_mmd(phydev, vals->devad, vals->regnum,
-				    vals->val);
-		if (ret < 0)
-			return ret;
-	}
-
-	return 0;
-}
-
 static int mv88q222x_revb0_config_init(struct phy_device *phydev)
 {
 	int ret;
 
-	ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb0_init_seq0,
+	ret = mv88q2xxx_write_mmd_vals(phydev, mv88q222x_revb0_init_seq0,
 				       ARRAY_SIZE(mv88q222x_revb0_init_seq0));
 	if (ret < 0)
 		return ret;
 
 	usleep_range(5000, 10000);
 
-	ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb0_init_seq1,
+	ret = mv88q2xxx_write_mmd_vals(phydev, mv88q222x_revb0_init_seq1,
 				       ARRAY_SIZE(mv88q222x_revb0_init_seq1));
 	if (ret < 0)
 		return ret;
@@ -764,17 +764,17 @@ static int mv88q222x_revb1_revb2_config_init(struct phy_device *phydev)
 	int ret;
 
 	if (is_rev_b1)
-		ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb1_init_seq0,
+		ret = mv88q2xxx_write_mmd_vals(phydev, mv88q222x_revb1_init_seq0,
 					       ARRAY_SIZE(mv88q222x_revb1_init_seq0));
 	else
-		ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb2_init_seq0,
+		ret = mv88q2xxx_write_mmd_vals(phydev, mv88q222x_revb2_init_seq0,
 					       ARRAY_SIZE(mv88q222x_revb2_init_seq0));
 	if (ret < 0)
 		return ret;
 
 	usleep_range(3000, 5000);
 
-	ret = mv88q222x_write_mmd_vals(phydev, mv88q222x_revb1_revb2_init_seq1,
+	ret = mv88q2xxx_write_mmd_vals(phydev, mv88q222x_revb1_revb2_init_seq1,
 				       ARRAY_SIZE(mv88q222x_revb1_revb2_init_seq1));
 	if (ret < 0)
 		return ret;
-- 
2.46.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ