[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <zqk3dsg6qdr7nvul34cv5qygtrcq3h2kpwojr7e4nsbgvo2i6a@xbmfcgtb3uad>
Date: Mon, 23 Sep 2024 10:12:01 +0200
From: Markus Schneider-Pargmann <msp@...libre.com>
To: Matthias Schiffer <matthias.schiffer@...tq-group.com>
Cc: Chandrasekar Ramakrishnan <rcsekar@...sung.com>,
Marc Kleine-Budde <mkl@...gutronix.de>, Vincent Mailhol <mailhol.vincent@...adoo.fr>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Martin Hundebøll <martin@...nix.com>, "Felipe Balbi (Intel)" <balbi@...nel.org>,
Raymond Tan <raymond.tan@...el.com>, Jarkko Nikula <jarkko.nikula@...ux.intel.com>,
linux-can@...r.kernel.org, netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linux@...tq-group.com
Subject: Re: [PATCH v2 1/2] can: m_can: set init flag earlier in probe
On Thu, Sep 19, 2024 at 01:27:27PM GMT, Matthias Schiffer wrote:
> While an m_can controller usually already has the init flag from a
> hardware reset, no such reset happens on the integrated m_can_pci of the
> Intel Elkhart Lake. If the CAN controller is found in an active state,
> m_can_dev_setup() would fail because m_can_niso_supported() calls
> m_can_cccr_update_bits(), which refuses to modify any other configuration
> bits when CCCR_INIT is not set.
>
> To avoid this issue, set CCCR_INIT before attempting to modify any other
> configuration flags.
>
> Fixes: cd5a46ce6fa6 ("can: m_can: don't enable transceiver when probing")
> Signed-off-by: Matthias Schiffer <matthias.schiffer@...tq-group.com>
> ---
>
> v2: no changes
>
> drivers/net/can/m_can/m_can.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index 012c3d22b01dd..47481afb9add3 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -1681,6 +1681,14 @@ static int m_can_dev_setup(struct m_can_classdev *cdev)
> return -EINVAL;
> }
>
> + /* Forcing standby mode should be redundant, as the chip should be in
> + * standby after a reset. Write the INIT bit anyways, should the chip
> + * be configured by previous stage.
> + */
Could you please update the comment to reflect your findings?
Best
Markus
> + err = m_can_cccr_update_bits(cdev, CCCR_INIT, CCCR_INIT);
> + if (err)
> + return err;
> +
> if (!cdev->is_peripheral)
> netif_napi_add(dev, &cdev->napi, m_can_poll);
>
> @@ -1732,11 +1740,7 @@ static int m_can_dev_setup(struct m_can_classdev *cdev)
> return -EINVAL;
> }
>
> - /* Forcing standby mode should be redundant, as the chip should be in
> - * standby after a reset. Write the INIT bit anyways, should the chip
> - * be configured by previous stage.
> - */
> - return m_can_cccr_update_bits(cdev, CCCR_INIT, CCCR_INIT);
> + return 0;
> }
>
> static void m_can_stop(struct net_device *dev)
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> https://www.tq-group.com/
>
Powered by blists - more mailing lists