[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <85f0b520-95dd-4ad3-a1a9-544e00089533@collabora.com>
Date: Wed, 16 Oct 2024 12:41:42 +0200
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
To: Nícolas F. R. A. Prado <nfraprado@...labora.com>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Matthias Brugger
<matthias.bgg@...il.com>, Richard Cochran <richardcochran@...il.com>
Cc: kernel@...labora.com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, netdev@...r.kernel.org,
Jianguo Zhang <jianguo.zhang@...iatek.com>,
Macpaul Lin <macpaul.lin@...iatek.com>,
Hsuan-Yu Lin <shane.lin@...onical.com>, Pablo Sun <pablo.sun@...iatek.com>,
fanyi zhang <fanyi.zhang@...iatek.com>
Subject: Re: [PATCH 2/2] arm64: dts: mediatek: mt8390-genio-700-evk: Enable
ethernet
Il 15/10/24 20:15, Nícolas F. R. A. Prado ha scritto:
> Enable ethernet on the Genio 700 EVK board. It has been tested to work
> with speeds up to 1000Gbps.
>
> Signed-off-by: Jianguo Zhang <jianguo.zhang@...iatek.com>
> Signed-off-by: Macpaul Lin <macpaul.lin@...iatek.com>
> Signed-off-by: Hsuan-Yu Lin <shane.lin@...onical.com>
> Signed-off-by: Pablo Sun <pablo.sun@...iatek.com>
> Signed-off-by: fanyi zhang <fanyi.zhang@...iatek.com>
> [Cleaned up to pass dtbs_check, follow DTS style guidelines, and split
> between mt8188 and genio700 commits]
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@...labora.com>
> ---
> .../boot/dts/mediatek/mt8390-genio-700-evk.dts | 25 ++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
> index 0a6c9871b41e5f913740e68853aea78bc33d02aa..73e34e98726d36785e8b2cef73f532b6bb07c97f 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
> @@ -24,6 +24,7 @@ / {
>
> aliases {
> serial0 = &uart0;
> + ethernet0 = ð
> };
>
> chosen {
> @@ -845,6 +846,30 @@ pins-wifi-enable {
> };
> };
>
> +ð {
> + phy-mode ="rgmii-rxid";
> + phy-handle = <ðernet_phy0>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <ð_default_pins>;
> + pinctrl-1 = <ð_sleep_pins>;
> + snps,reset-gpio = <&pio 147 GPIO_ACTIVE_HIGH>;
> + snps,reset-delays-us = <0 10000 10000>;
> + mediatek,tx-delay-ps = <2030>;
> + mediatek,mac-wol;
mediatek,mac-wol;
mediatek,tx-delay-ps = <2030>;
snps,reset-delays-us = <0 10000 10000>;
snps,reset-gpio = <&pio 147 GPIO_ACTIVE_HIGH>;
Cheers,
Angelo
> + status = "okay";
> +
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethernet_phy0: ethernet-phy@1 {
> + compatible = "ethernet-phy-id001c.c916";
> + reg = <0x1>;
> + };
> + };
> +};
> +
> &pmic {
> interrupt-parent = <&pio>;
> interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
>
Powered by blists - more mailing lists