| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241030093924.1251343-7-wei.fang@nxp.com>
Date: Wed, 30 Oct 2024 17:39:17 +0800
From: Wei Fang <wei.fang@....com>
To: davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
vladimir.oltean@....com,
claudiu.manoil@....com,
xiaoning.wang@....com,
Frank.Li@....com,
christophe.leroy@...roup.eu,
linux@...linux.org.uk,
horms@...nel.org
Cc: imx@...ts.linux.dev,
netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org,
alexander.stein@...tq-group.com
Subject: [PATCH v6 net-next 06/12] net: enetc: build enetc_pf_common.c as a separate module
Compile enetc_pf_common.c as a standalone module to allow shared usage
between ENETC v1 and v4 PF drivers. Add struct enetc_pf_ops to register
different hardware operation interfaces for both ENETC v1 and v4 PF
drivers.
Signed-off-by: Wei Fang <wei.fang@....com>
---
v6:
1. remove enetc_pf_ops_register()
2. do not check enetc_pf_ops::set_si_primary_mac() and
enetc_pf_ops::get_si_primary_mac(), because both enetc v1 and v4 drivers
supports them
3. add enetc_get_si_hw_addr()
4. add dev_err() message if pf->ops->create_pcs() is NULL
---
drivers/net/ethernet/freescale/enetc/Kconfig | 9 ++++
drivers/net/ethernet/freescale/enetc/Makefile | 5 +-
.../net/ethernet/freescale/enetc/enetc_pf.c | 26 ++++++++--
.../net/ethernet/freescale/enetc/enetc_pf.h | 12 +++++
.../freescale/enetc/enetc_pf_common.c | 50 +++++++++++++++----
.../freescale/enetc/enetc_pf_common.h | 3 --
6 files changed, 89 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/freescale/enetc/Kconfig b/drivers/net/ethernet/freescale/enetc/Kconfig
index 51d80ea959d4..e1b151a98b41 100644
--- a/drivers/net/ethernet/freescale/enetc/Kconfig
+++ b/drivers/net/ethernet/freescale/enetc/Kconfig
@@ -7,6 +7,14 @@ config FSL_ENETC_CORE
If compiled as module (M), the module name is fsl-enetc-core.
+config NXP_ENETC_PF_COMMON
+ tristate
+ help
+ This module supports common functionality between drivers of
+ different versions of NXP ENETC PF controllers.
+
+ If compiled as module (M), the module name is nxp-enetc-pf-common.
+
config FSL_ENETC
tristate "ENETC PF driver"
depends on PCI_MSI
@@ -14,6 +22,7 @@ config FSL_ENETC
select FSL_ENETC_CORE
select FSL_ENETC_IERB
select FSL_ENETC_MDIO
+ select NXP_ENETC_PF_COMMON
select PHYLINK
select PCS_LYNX
select DIMLIB
diff --git a/drivers/net/ethernet/freescale/enetc/Makefile b/drivers/net/ethernet/freescale/enetc/Makefile
index 8f4d8e9c37a0..ebe232673ed4 100644
--- a/drivers/net/ethernet/freescale/enetc/Makefile
+++ b/drivers/net/ethernet/freescale/enetc/Makefile
@@ -3,8 +3,11 @@
obj-$(CONFIG_FSL_ENETC_CORE) += fsl-enetc-core.o
fsl-enetc-core-y := enetc.o enetc_cbdr.o enetc_ethtool.o
+obj-$(CONFIG_NXP_ENETC_PF_COMMON) += nxp-enetc-pf-common.o
+nxp-enetc-pf-common-y := enetc_pf_common.o
+
obj-$(CONFIG_FSL_ENETC) += fsl-enetc.o
-fsl-enetc-y := enetc_pf.o enetc_pf_common.o
+fsl-enetc-y := enetc_pf.o
fsl-enetc-$(CONFIG_PCI_IOV) += enetc_msg.o
fsl-enetc-$(CONFIG_FSL_ENETC_QOS) += enetc_qos.o
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index 36fc93725309..1ff9a7a3386c 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -12,7 +12,7 @@
#define ENETC_DRV_NAME_STR "ENETC PF driver"
-void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr)
+static void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr)
{
u32 upper = __raw_readl(hw->port + ENETC_PSIPMAR0(si));
u16 lower = __raw_readw(hw->port + ENETC_PSIPMAR1(si));
@@ -21,8 +21,8 @@ void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr)
put_unaligned_le16(lower, addr + 4);
}
-void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si,
- const u8 *addr)
+static void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si,
+ const u8 *addr)
{
u32 upper = get_unaligned_le32(addr);
u16 lower = get_unaligned_le16(addr + 4);
@@ -31,6 +31,17 @@ void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si,
__raw_writew(lower, hw->port + ENETC_PSIPMAR1(si));
}
+static struct phylink_pcs *enetc_pf_create_pcs(struct enetc_pf *pf,
+ struct mii_bus *bus)
+{
+ return lynx_pcs_create_mdiodev(bus, 0);
+}
+
+static void enetc_pf_destroy_pcs(struct phylink_pcs *pcs)
+{
+ lynx_pcs_destroy(pcs);
+}
+
static void enetc_set_vlan_promisc(struct enetc_hw *hw, char si_map)
{
u32 val = enetc_port_rd(hw, ENETC_PSIPVMR);
@@ -971,6 +982,14 @@ static void enetc_psi_destroy(struct pci_dev *pdev)
enetc_pci_remove(pdev);
}
+static const struct enetc_pf_ops enetc_pf_ops = {
+ .set_si_primary_mac = enetc_pf_set_primary_mac_addr,
+ .get_si_primary_mac = enetc_pf_get_primary_mac_addr,
+ .create_pcs = enetc_pf_create_pcs,
+ .destroy_pcs = enetc_pf_destroy_pcs,
+ .enable_psfp = enetc_psfp_enable,
+};
+
static int enetc_pf_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -998,6 +1017,7 @@ static int enetc_pf_probe(struct pci_dev *pdev,
pf = enetc_si_priv(si);
pf->si = si;
pf->total_vfs = pci_sriov_get_totalvfs(pdev);
+ pf->ops = &enetc_pf_ops;
err = enetc_setup_mac_addresses(node, pf);
if (err)
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.h b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
index c26bd66e4597..53d20752aacf 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
@@ -28,6 +28,16 @@ struct enetc_vf_state {
enum enetc_vf_flags flags;
};
+struct enetc_pf;
+
+struct enetc_pf_ops {
+ void (*set_si_primary_mac)(struct enetc_hw *hw, int si, const u8 *addr);
+ void (*get_si_primary_mac)(struct enetc_hw *hw, int si, u8 *addr);
+ struct phylink_pcs *(*create_pcs)(struct enetc_pf *pf, struct mii_bus *bus);
+ void (*destroy_pcs)(struct phylink_pcs *pcs);
+ int (*enable_psfp)(struct enetc_ndev_priv *priv);
+};
+
struct enetc_pf {
struct enetc_si *si;
int num_vfs; /* number of active VFs, after sriov_init */
@@ -50,6 +60,8 @@ struct enetc_pf {
phy_interface_t if_mode;
struct phylink_config phylink_config;
+
+ const struct enetc_pf_ops *ops;
};
#define phylink_to_enetc_pf(config) \
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
index 925011b16563..e95252e898ae 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
@@ -4,29 +4,44 @@
#include <linux/fsl/enetc_mdio.h>
#include <linux/of_mdio.h>
#include <linux/of_net.h>
-#include <linux/pcs-lynx.h>
#include "enetc_pf_common.h"
+static void enetc_set_si_hw_addr(struct enetc_pf *pf, int si,
+ const u8 *mac_addr)
+{
+ struct enetc_hw *hw = &pf->si->hw;
+
+ pf->ops->set_si_primary_mac(hw, si, mac_addr);
+}
+
+static void enetc_get_si_hw_addr(struct enetc_pf *pf, int si, u8 *mac_addr)
+{
+ struct enetc_hw *hw = &pf->si->hw;
+
+ pf->ops->get_si_primary_mac(hw, si, mac_addr);
+}
+
int enetc_pf_set_mac_addr(struct net_device *ndev, void *addr)
{
struct enetc_ndev_priv *priv = netdev_priv(ndev);
+ struct enetc_pf *pf = enetc_si_priv(priv->si);
struct sockaddr *saddr = addr;
if (!is_valid_ether_addr(saddr->sa_data))
return -EADDRNOTAVAIL;
eth_hw_addr_set(ndev, saddr->sa_data);
- enetc_pf_set_primary_mac_addr(&priv->si->hw, 0, saddr->sa_data);
+ enetc_set_si_hw_addr(pf, 0, saddr->sa_data);
return 0;
}
+EXPORT_SYMBOL_GPL(enetc_pf_set_mac_addr);
static int enetc_setup_mac_address(struct device_node *np, struct enetc_pf *pf,
int si)
{
struct device *dev = &pf->si->pdev->dev;
- struct enetc_hw *hw = &pf->si->hw;
u8 mac_addr[ETH_ALEN] = { 0 };
int err;
@@ -39,7 +54,7 @@ static int enetc_setup_mac_address(struct device_node *np, struct enetc_pf *pf,
/* (2) bootloader supplied MAC address */
if (is_zero_ether_addr(mac_addr))
- enetc_pf_get_primary_mac_addr(hw, si, mac_addr);
+ enetc_get_si_hw_addr(pf, si, mac_addr);
/* (3) choose a random one */
if (is_zero_ether_addr(mac_addr)) {
@@ -48,7 +63,7 @@ static int enetc_setup_mac_address(struct device_node *np, struct enetc_pf *pf,
si, mac_addr);
}
- enetc_pf_set_primary_mac_addr(hw, si, mac_addr);
+ enetc_set_si_hw_addr(pf, si, mac_addr);
return 0;
}
@@ -70,11 +85,13 @@ int enetc_setup_mac_addresses(struct device_node *np, struct enetc_pf *pf)
return 0;
}
+EXPORT_SYMBOL_GPL(enetc_setup_mac_addresses);
void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
const struct net_device_ops *ndev_ops)
{
struct enetc_ndev_priv *priv = netdev_priv(ndev);
+ struct enetc_pf *pf = enetc_si_priv(si);
SET_NETDEV_DEV(ndev, &si->pdev->dev);
priv->ndev = ndev;
@@ -107,7 +124,8 @@ void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
NETDEV_XDP_ACT_NDO_XMIT | NETDEV_XDP_ACT_RX_SG |
NETDEV_XDP_ACT_NDO_XMIT_SG;
- if (si->hw_features & ENETC_SI_F_PSFP && !enetc_psfp_enable(priv)) {
+ if (si->hw_features & ENETC_SI_F_PSFP && pf->ops->enable_psfp &&
+ !pf->ops->enable_psfp(priv)) {
priv->active_offloads |= ENETC_F_QCI;
ndev->features |= NETIF_F_HW_TC;
ndev->hw_features |= NETIF_F_HW_TC;
@@ -116,6 +134,7 @@ void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
/* pick up primary MAC address from SI */
enetc_load_primary_mac_addr(&si->hw, ndev);
}
+EXPORT_SYMBOL_GPL(enetc_pf_netdev_setup);
static int enetc_mdio_probe(struct enetc_pf *pf, struct device_node *np)
{
@@ -162,6 +181,12 @@ static int enetc_imdio_create(struct enetc_pf *pf)
struct mii_bus *bus;
int err;
+ if (!pf->ops->create_pcs) {
+ dev_err(dev, "Creating PCS is not supported\n");
+
+ return -EOPNOTSUPP;
+ }
+
bus = mdiobus_alloc_size(sizeof(*mdio_priv));
if (!bus)
return -ENOMEM;
@@ -184,7 +209,7 @@ static int enetc_imdio_create(struct enetc_pf *pf)
goto free_mdio_bus;
}
- phylink_pcs = lynx_pcs_create_mdiodev(bus, 0);
+ phylink_pcs = pf->ops->create_pcs(pf, bus);
if (IS_ERR(phylink_pcs)) {
err = PTR_ERR(phylink_pcs);
dev_err(dev, "cannot create lynx pcs (%d)\n", err);
@@ -205,8 +230,8 @@ static int enetc_imdio_create(struct enetc_pf *pf)
static void enetc_imdio_remove(struct enetc_pf *pf)
{
- if (pf->pcs)
- lynx_pcs_destroy(pf->pcs);
+ if (pf->pcs && pf->ops->destroy_pcs)
+ pf->ops->destroy_pcs(pf->pcs);
if (pf->imdio) {
mdiobus_unregister(pf->imdio);
@@ -246,12 +271,14 @@ int enetc_mdiobus_create(struct enetc_pf *pf, struct device_node *node)
return 0;
}
+EXPORT_SYMBOL_GPL(enetc_mdiobus_create);
void enetc_mdiobus_destroy(struct enetc_pf *pf)
{
enetc_mdio_remove(pf);
enetc_imdio_remove(pf);
}
+EXPORT_SYMBOL_GPL(enetc_mdiobus_destroy);
int enetc_phylink_create(struct enetc_ndev_priv *priv, struct device_node *node,
const struct phylink_mac_ops *ops)
@@ -288,8 +315,13 @@ int enetc_phylink_create(struct enetc_ndev_priv *priv, struct device_node *node,
return 0;
}
+EXPORT_SYMBOL_GPL(enetc_phylink_create);
void enetc_phylink_destroy(struct enetc_ndev_priv *priv)
{
phylink_destroy(priv->phylink);
}
+EXPORT_SYMBOL_GPL(enetc_phylink_destroy);
+
+MODULE_DESCRIPTION("NXP ENETC PF common functionality driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.h b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.h
index 2ae9c87c8c8a..964d4f53806b 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.h
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.h
@@ -3,9 +3,6 @@
#include "enetc_pf.h"
-void enetc_pf_get_primary_mac_addr(struct enetc_hw *hw, int si, u8 *addr);
-void enetc_pf_set_primary_mac_addr(struct enetc_hw *hw, int si,
- const u8 *addr);
int enetc_pf_set_mac_addr(struct net_device *ndev, void *addr);
int enetc_setup_mac_addresses(struct device_node *np, struct enetc_pf *pf);
void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
--
2.34.1
Powered by blists - more mailing lists