| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241113173222.372128-2-ap420073@gmail.com>
Date: Wed, 13 Nov 2024 17:32:15 +0000
From: Taehee Yoo <ap420073@...il.com>
To: davem@...emloft.net,
kuba@...nel.org,
pabeni@...hat.com,
edumazet@...gle.com,
almasrymina@...gle.com,
donald.hunter@...il.com,
corbet@....net,
michael.chan@...adcom.com,
andrew+netdev@...n.ch,
hawk@...nel.org,
ilias.apalodimas@...aro.org,
ast@...nel.org,
daniel@...earbox.net,
john.fastabend@...il.com,
dw@...idwei.uk,
sdf@...ichev.me,
asml.silence@...il.com,
brett.creeley@....com,
linux-doc@...r.kernel.org,
netdev@...r.kernel.org
Cc: kory.maincent@...tlin.com,
maxime.chevallier@...tlin.com,
danieller@...dia.com,
hengqi@...ux.alibaba.com,
ecree.xilinx@...il.com,
przemyslaw.kitszel@...el.com,
hkallweit1@...il.com,
ahmed.zaki@...el.com,
rrameshbabu@...dia.com,
idosch@...dia.com,
jiri@...nulli.us,
bigeasy@...utronix.de,
lorenzo@...nel.org,
jdamato@...tly.com,
aleksander.lobakin@...el.com,
kaiyuanz@...gle.com,
willemb@...gle.com,
daniel.zahka@...il.com,
ap420073@...il.com
Subject: [PATCH net-next v5 1/7] bnxt_en: add support for rx-copybreak ethtool command
The bnxt_en driver supports rx-copybreak, but it couldn't be set by
userspace. Only the default value(256) has worked.
This patch makes the bnxt_en driver support following command.
`ethtool --set-tunable <devname> rx-copybreak <value> ` and
`ethtool --get-tunable <devname> rx-copybreak`.
By this patch, hds_threshol is set to the rx-copybreak value.
But it will be set by `ethtool -G eth0 header-data-split-thresh N`
in the next patch.
Reviewed-by: Brett Creeley <brett.creeley@....com>
Tested-by: Stanislav Fomichev <sdf@...ichev.me>
Signed-off-by: Taehee Yoo <ap420073@...il.com>
---
v5:
- Do not set HDS if XDP is attached.
- rx_size and pkt_size are always bigger than 256.
v4:
- Remove min rx-copybreak value.
- Add Review tag from Brett.
- Add Test tag from Stanislav.
v3:
- Update copybreak value after closing nic and before opening nic when
the device is running.
v2:
- Define max/vim rx_copybreak value.
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 28 ++++++-----
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 5 +-
.../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 49 ++++++++++++++++++-
3 files changed, 68 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 4c1302a8f72d..d521b8918c02 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -81,7 +81,6 @@ MODULE_DESCRIPTION("Broadcom NetXtreme network driver");
#define BNXT_RX_OFFSET (NET_SKB_PAD + NET_IP_ALIGN)
#define BNXT_RX_DMA_OFFSET NET_SKB_PAD
-#define BNXT_RX_COPY_THRESH 256
#define BNXT_TX_PUSH_THRESH 164
@@ -1328,13 +1327,13 @@ static struct sk_buff *bnxt_copy_data(struct bnxt_napi *bnapi, u8 *data,
if (!skb)
return NULL;
- dma_sync_single_for_cpu(&pdev->dev, mapping, bp->rx_copy_thresh,
+ dma_sync_single_for_cpu(&pdev->dev, mapping, bp->rx_copybreak,
bp->rx_dir);
memcpy(skb->data - NET_IP_ALIGN, data - NET_IP_ALIGN,
len + NET_IP_ALIGN);
- dma_sync_single_for_device(&pdev->dev, mapping, bp->rx_copy_thresh,
+ dma_sync_single_for_device(&pdev->dev, mapping, bp->rx_copybreak,
bp->rx_dir);
skb_put(skb, len);
@@ -1827,7 +1826,7 @@ static inline struct sk_buff *bnxt_tpa_end(struct bnxt *bp,
return NULL;
}
- if (len <= bp->rx_copy_thresh) {
+ if (len <= bp->rx_copybreak) {
skb = bnxt_copy_skb(bnapi, data_ptr, len, mapping);
if (!skb) {
bnxt_abort_tpa(cpr, idx, agg_bufs);
@@ -2161,7 +2160,7 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
}
}
- if (len <= bp->rx_copy_thresh) {
+ if (len <= bp->rx_copybreak) {
if (!xdp_active)
skb = bnxt_copy_skb(bnapi, data_ptr, len, dma_addr);
else
@@ -4452,6 +4451,11 @@ void bnxt_set_tpa_flags(struct bnxt *bp)
bp->flags |= BNXT_FLAG_GRO;
}
+static void bnxt_init_ring_params(struct bnxt *bp)
+{
+ bp->rx_copybreak = BNXT_DEFAULT_RX_COPYBREAK;
+}
+
/* bp->rx_ring_size, bp->tx_ring_size, dev->mtu, BNXT_FLAG_{G|L}RO flags must
* be set on entry.
*/
@@ -4466,7 +4470,6 @@ void bnxt_set_ring_params(struct bnxt *bp)
rx_space = rx_size + ALIGN(max(NET_SKB_PAD, XDP_PACKET_HEADROOM), 8) +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
- bp->rx_copy_thresh = BNXT_RX_COPY_THRESH;
ring_size = bp->rx_ring_size;
bp->rx_agg_ring_size = 0;
bp->rx_agg_nr_pages = 0;
@@ -4511,7 +4514,9 @@ void bnxt_set_ring_params(struct bnxt *bp)
ALIGN(max(NET_SKB_PAD, XDP_PACKET_HEADROOM), 8) -
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
} else {
- rx_size = SKB_DATA_ALIGN(BNXT_RX_COPY_THRESH + NET_IP_ALIGN);
+ rx_size = SKB_DATA_ALIGN(max(BNXT_DEFAULT_RX_COPYBREAK,
+ bp->rx_copybreak) +
+ NET_IP_ALIGN);
rx_space = rx_size + NET_SKB_PAD +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
}
@@ -6417,16 +6422,14 @@ static int bnxt_hwrm_vnic_set_hds(struct bnxt *bp, struct bnxt_vnic_info *vnic)
req->flags = cpu_to_le32(VNIC_PLCMODES_CFG_REQ_FLAGS_JUMBO_PLACEMENT);
req->enables = cpu_to_le32(VNIC_PLCMODES_CFG_REQ_ENABLES_JUMBO_THRESH_VALID);
+ req->jumbo_thresh = cpu_to_le16(bp->rx_buf_use_size);
- if (BNXT_RX_PAGE_MODE(bp)) {
- req->jumbo_thresh = cpu_to_le16(bp->rx_buf_use_size);
- } else {
+ if (!BNXT_RX_PAGE_MODE(bp) && (bp->flags & BNXT_FLAG_AGG_RINGS)) {
req->flags |= cpu_to_le32(VNIC_PLCMODES_CFG_REQ_FLAGS_HDS_IPV4 |
VNIC_PLCMODES_CFG_REQ_FLAGS_HDS_IPV6);
req->enables |=
cpu_to_le32(VNIC_PLCMODES_CFG_REQ_ENABLES_HDS_THRESHOLD_VALID);
- req->jumbo_thresh = cpu_to_le16(bp->rx_copy_thresh);
- req->hds_threshold = cpu_to_le16(bp->rx_copy_thresh);
+ req->hds_threshold = cpu_to_le16(bp->rx_copybreak);
}
req->vnic_id = cpu_to_le32(vnic->fw_vnic_id);
return hwrm_req_send(bp, req);
@@ -15872,6 +15875,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
bnxt_init_l2_fltr_tbl(bp);
bnxt_set_rx_skb_mode(bp, false);
bnxt_set_tpa_flags(bp);
+ bnxt_init_ring_params(bp);
bnxt_set_ring_params(bp);
bnxt_rdma_aux_device_init(bp);
rc = bnxt_set_dflt_rings(bp, true);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 649955fa3e37..d1eef880eec5 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -34,6 +34,9 @@
#include <linux/firmware/broadcom/tee_bnxt_fw.h>
#endif
+#define BNXT_DEFAULT_RX_COPYBREAK 256
+#define BNXT_MAX_RX_COPYBREAK 1024
+
extern struct list_head bnxt_block_cb_list;
struct page_pool;
@@ -2300,7 +2303,7 @@ struct bnxt {
enum dma_data_direction rx_dir;
u32 rx_ring_size;
u32 rx_agg_ring_size;
- u32 rx_copy_thresh;
+ u32 rx_copybreak;
u32 rx_ring_mask;
u32 rx_agg_ring_mask;
int rx_nr_pages;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index cfd2c65b1c90..adf30d1f738f 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -4318,6 +4318,50 @@ static int bnxt_get_eee(struct net_device *dev, struct ethtool_keee *edata)
return 0;
}
+static int bnxt_set_tunable(struct net_device *dev,
+ const struct ethtool_tunable *tuna,
+ const void *data)
+{
+ struct bnxt *bp = netdev_priv(dev);
+ u32 rx_copybreak;
+
+ switch (tuna->id) {
+ case ETHTOOL_RX_COPYBREAK:
+ rx_copybreak = *(u32 *)data;
+ if (rx_copybreak > BNXT_MAX_RX_COPYBREAK)
+ return -ERANGE;
+ if (rx_copybreak != bp->rx_copybreak) {
+ if (netif_running(dev)) {
+ bnxt_close_nic(bp, false, false);
+ bp->rx_copybreak = rx_copybreak;
+ bnxt_set_ring_params(bp);
+ bnxt_open_nic(bp, false, false);
+ } else {
+ bp->rx_copybreak = rx_copybreak;
+ }
+ }
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int bnxt_get_tunable(struct net_device *dev,
+ const struct ethtool_tunable *tuna, void *data)
+{
+ struct bnxt *bp = netdev_priv(dev);
+
+ switch (tuna->id) {
+ case ETHTOOL_RX_COPYBREAK:
+ *(u32 *)data = bp->rx_copybreak;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
static int bnxt_read_sfp_module_eeprom_info(struct bnxt *bp, u16 i2c_addr,
u16 page_number, u8 bank,
u16 start_addr, u16 data_length,
@@ -4768,7 +4812,8 @@ static int bnxt_run_loopback(struct bnxt *bp)
cpr = &rxr->bnapi->cp_ring;
if (bp->flags & BNXT_FLAG_CHIP_P5_PLUS)
cpr = rxr->rx_cpr;
- pkt_size = min(bp->dev->mtu + ETH_HLEN, bp->rx_copy_thresh);
+ pkt_size = min(bp->dev->mtu + ETH_HLEN, max(BNXT_DEFAULT_RX_COPYBREAK,
+ bp->rx_copybreak));
skb = netdev_alloc_skb(bp->dev, pkt_size);
if (!skb)
return -ENOMEM;
@@ -5341,6 +5386,8 @@ const struct ethtool_ops bnxt_ethtool_ops = {
.get_link_ext_stats = bnxt_get_link_ext_stats,
.get_eee = bnxt_get_eee,
.set_eee = bnxt_set_eee,
+ .get_tunable = bnxt_get_tunable,
+ .set_tunable = bnxt_set_tunable,
.get_module_info = bnxt_get_module_info,
.get_module_eeprom = bnxt_get_module_eeprom,
.get_module_eeprom_by_page = bnxt_get_module_eeprom_by_page,
--
2.34.1
Powered by blists - more mailing lists