| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZzZ_jzoX2nrqY8Ux@JRM7P7Q02P>
Date: Thu, 14 Nov 2024 17:54:07 -0500
From: Andy Gospodarek <andrew.gospodarek@...adcom.com>
To: Taehee Yoo <ap420073@...il.com>
Cc: davem@...emloft.net, kuba@...nel.org, pabeni@...hat.com,
edumazet@...gle.com, almasrymina@...gle.com,
donald.hunter@...il.com, corbet@....net, michael.chan@...adcom.com,
andrew+netdev@...n.ch, hawk@...nel.org, ilias.apalodimas@...aro.org,
ast@...nel.org, daniel@...earbox.net, john.fastabend@...il.com,
dw@...idwei.uk, sdf@...ichev.me, asml.silence@...il.com,
brett.creeley@....com, linux-doc@...r.kernel.org,
netdev@...r.kernel.org, kory.maincent@...tlin.com,
maxime.chevallier@...tlin.com, danieller@...dia.com,
hengqi@...ux.alibaba.com, ecree.xilinx@...il.com,
przemyslaw.kitszel@...el.com, hkallweit1@...il.com,
ahmed.zaki@...el.com, rrameshbabu@...dia.com, idosch@...dia.com,
jiri@...nulli.us, bigeasy@...utronix.de, lorenzo@...nel.org,
jdamato@...tly.com, aleksander.lobakin@...el.com,
kaiyuanz@...gle.com, willemb@...gle.com, daniel.zahka@...il.com
Subject: Re: [PATCH net-next v5 1/7] bnxt_en: add support for rx-copybreak
ethtool command
On Wed, Nov 13, 2024 at 05:32:15PM +0000, Taehee Yoo wrote:
> The bnxt_en driver supports rx-copybreak, but it couldn't be set by
> userspace. Only the default value(256) has worked.
> This patch makes the bnxt_en driver support following command.
> `ethtool --set-tunable <devname> rx-copybreak <value> ` and
> `ethtool --get-tunable <devname> rx-copybreak`.
>
> By this patch, hds_threshol is set to the rx-copybreak value.
> But it will be set by `ethtool -G eth0 header-data-split-thresh N`
> in the next patch.
>
> Reviewed-by: Brett Creeley <brett.creeley@....com>
> Tested-by: Stanislav Fomichev <sdf@...ichev.me>
> Signed-off-by: Taehee Yoo <ap420073@...il.com>
Tested-by: Andy Gospodarek <gospo@...adcom.com>
> ---
>
> v5:
> - Do not set HDS if XDP is attached.
> - rx_size and pkt_size are always bigger than 256.
>
> v4:
> - Remove min rx-copybreak value.
> - Add Review tag from Brett.
> - Add Test tag from Stanislav.
>
> v3:
> - Update copybreak value after closing nic and before opening nic when
> the device is running.
>
> v2:
> - Define max/vim rx_copybreak value.
>
> drivers/net/ethernet/broadcom/bnxt/bnxt.c | 28 ++++++-----
> drivers/net/ethernet/broadcom/bnxt/bnxt.h | 5 +-
> .../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 49 ++++++++++++++++++-
> 3 files changed, 68 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
> index 4c1302a8f72d..d521b8918c02 100644
> --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
> +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
> @@ -81,7 +81,6 @@ MODULE_DESCRIPTION("Broadcom NetXtreme network driver");
>
> #define BNXT_RX_OFFSET (NET_SKB_PAD + NET_IP_ALIGN)
> #define BNXT_RX_DMA_OFFSET NET_SKB_PAD
> -#define BNXT_RX_COPY_THRESH 256
>
> #define BNXT_TX_PUSH_THRESH 164
>
> @@ -1328,13 +1327,13 @@ static struct sk_buff *bnxt_copy_data(struct bnxt_napi *bnapi, u8 *data,
> if (!skb)
> return NULL;
>
> - dma_sync_single_for_cpu(&pdev->dev, mapping, bp->rx_copy_thresh,
> + dma_sync_single_for_cpu(&pdev->dev, mapping, bp->rx_copybreak,
> bp->rx_dir);
>
> memcpy(skb->data - NET_IP_ALIGN, data - NET_IP_ALIGN,
> len + NET_IP_ALIGN);
>
> - dma_sync_single_for_device(&pdev->dev, mapping, bp->rx_copy_thresh,
> + dma_sync_single_for_device(&pdev->dev, mapping, bp->rx_copybreak,
> bp->rx_dir);
>
> skb_put(skb, len);
> @@ -1827,7 +1826,7 @@ static inline struct sk_buff *bnxt_tpa_end(struct bnxt *bp,
> return NULL;
> }
>
> - if (len <= bp->rx_copy_thresh) {
> + if (len <= bp->rx_copybreak) {
> skb = bnxt_copy_skb(bnapi, data_ptr, len, mapping);
> if (!skb) {
> bnxt_abort_tpa(cpr, idx, agg_bufs);
> @@ -2161,7 +2160,7 @@ static int bnxt_rx_pkt(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,
> }
> }
>
> - if (len <= bp->rx_copy_thresh) {
> + if (len <= bp->rx_copybreak) {
> if (!xdp_active)
> skb = bnxt_copy_skb(bnapi, data_ptr, len, dma_addr);
> else
> @@ -4452,6 +4451,11 @@ void bnxt_set_tpa_flags(struct bnxt *bp)
> bp->flags |= BNXT_FLAG_GRO;
> }
>
> +static void bnxt_init_ring_params(struct bnxt *bp)
> +{
> + bp->rx_copybreak = BNXT_DEFAULT_RX_COPYBREAK;
> +}
> +
> /* bp->rx_ring_size, bp->tx_ring_size, dev->mtu, BNXT_FLAG_{G|L}RO flags must
> * be set on entry.
> */
> @@ -4466,7 +4470,6 @@ void bnxt_set_ring_params(struct bnxt *bp)
> rx_space = rx_size + ALIGN(max(NET_SKB_PAD, XDP_PACKET_HEADROOM), 8) +
> SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
>
> - bp->rx_copy_thresh = BNXT_RX_COPY_THRESH;
> ring_size = bp->rx_ring_size;
> bp->rx_agg_ring_size = 0;
> bp->rx_agg_nr_pages = 0;
> @@ -4511,7 +4514,9 @@ void bnxt_set_ring_params(struct bnxt *bp)
> ALIGN(max(NET_SKB_PAD, XDP_PACKET_HEADROOM), 8) -
> SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
> } else {
> - rx_size = SKB_DATA_ALIGN(BNXT_RX_COPY_THRESH + NET_IP_ALIGN);
> + rx_size = SKB_DATA_ALIGN(max(BNXT_DEFAULT_RX_COPYBREAK,
> + bp->rx_copybreak) +
> + NET_IP_ALIGN);
> rx_space = rx_size + NET_SKB_PAD +
> SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
> }
> @@ -6417,16 +6422,14 @@ static int bnxt_hwrm_vnic_set_hds(struct bnxt *bp, struct bnxt_vnic_info *vnic)
>
> req->flags = cpu_to_le32(VNIC_PLCMODES_CFG_REQ_FLAGS_JUMBO_PLACEMENT);
> req->enables = cpu_to_le32(VNIC_PLCMODES_CFG_REQ_ENABLES_JUMBO_THRESH_VALID);
> + req->jumbo_thresh = cpu_to_le16(bp->rx_buf_use_size);
>
> - if (BNXT_RX_PAGE_MODE(bp)) {
> - req->jumbo_thresh = cpu_to_le16(bp->rx_buf_use_size);
> - } else {
> + if (!BNXT_RX_PAGE_MODE(bp) && (bp->flags & BNXT_FLAG_AGG_RINGS)) {
> req->flags |= cpu_to_le32(VNIC_PLCMODES_CFG_REQ_FLAGS_HDS_IPV4 |
> VNIC_PLCMODES_CFG_REQ_FLAGS_HDS_IPV6);
> req->enables |=
> cpu_to_le32(VNIC_PLCMODES_CFG_REQ_ENABLES_HDS_THRESHOLD_VALID);
> - req->jumbo_thresh = cpu_to_le16(bp->rx_copy_thresh);
> - req->hds_threshold = cpu_to_le16(bp->rx_copy_thresh);
> + req->hds_threshold = cpu_to_le16(bp->rx_copybreak);
> }
> req->vnic_id = cpu_to_le32(vnic->fw_vnic_id);
> return hwrm_req_send(bp, req);
> @@ -15872,6 +15875,7 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> bnxt_init_l2_fltr_tbl(bp);
> bnxt_set_rx_skb_mode(bp, false);
> bnxt_set_tpa_flags(bp);
> + bnxt_init_ring_params(bp);
> bnxt_set_ring_params(bp);
> bnxt_rdma_aux_device_init(bp);
> rc = bnxt_set_dflt_rings(bp, true);
> diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
> index 649955fa3e37..d1eef880eec5 100644
> --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
> +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
> @@ -34,6 +34,9 @@
> #include <linux/firmware/broadcom/tee_bnxt_fw.h>
> #endif
>
> +#define BNXT_DEFAULT_RX_COPYBREAK 256
> +#define BNXT_MAX_RX_COPYBREAK 1024
> +
> extern struct list_head bnxt_block_cb_list;
>
> struct page_pool;
> @@ -2300,7 +2303,7 @@ struct bnxt {
> enum dma_data_direction rx_dir;
> u32 rx_ring_size;
> u32 rx_agg_ring_size;
> - u32 rx_copy_thresh;
> + u32 rx_copybreak;
> u32 rx_ring_mask;
> u32 rx_agg_ring_mask;
> int rx_nr_pages;
> diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
> index cfd2c65b1c90..adf30d1f738f 100644
> --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
> +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
> @@ -4318,6 +4318,50 @@ static int bnxt_get_eee(struct net_device *dev, struct ethtool_keee *edata)
> return 0;
> }
>
> +static int bnxt_set_tunable(struct net_device *dev,
> + const struct ethtool_tunable *tuna,
> + const void *data)
> +{
> + struct bnxt *bp = netdev_priv(dev);
> + u32 rx_copybreak;
> +
> + switch (tuna->id) {
> + case ETHTOOL_RX_COPYBREAK:
> + rx_copybreak = *(u32 *)data;
> + if (rx_copybreak > BNXT_MAX_RX_COPYBREAK)
> + return -ERANGE;
> + if (rx_copybreak != bp->rx_copybreak) {
> + if (netif_running(dev)) {
> + bnxt_close_nic(bp, false, false);
> + bp->rx_copybreak = rx_copybreak;
> + bnxt_set_ring_params(bp);
> + bnxt_open_nic(bp, false, false);
> + } else {
> + bp->rx_copybreak = rx_copybreak;
> + }
> + }
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int bnxt_get_tunable(struct net_device *dev,
> + const struct ethtool_tunable *tuna, void *data)
> +{
> + struct bnxt *bp = netdev_priv(dev);
> +
> + switch (tuna->id) {
> + case ETHTOOL_RX_COPYBREAK:
> + *(u32 *)data = bp->rx_copybreak;
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + return 0;
> +}
> +
> static int bnxt_read_sfp_module_eeprom_info(struct bnxt *bp, u16 i2c_addr,
> u16 page_number, u8 bank,
> u16 start_addr, u16 data_length,
> @@ -4768,7 +4812,8 @@ static int bnxt_run_loopback(struct bnxt *bp)
> cpr = &rxr->bnapi->cp_ring;
> if (bp->flags & BNXT_FLAG_CHIP_P5_PLUS)
> cpr = rxr->rx_cpr;
> - pkt_size = min(bp->dev->mtu + ETH_HLEN, bp->rx_copy_thresh);
> + pkt_size = min(bp->dev->mtu + ETH_HLEN, max(BNXT_DEFAULT_RX_COPYBREAK,
> + bp->rx_copybreak));
> skb = netdev_alloc_skb(bp->dev, pkt_size);
> if (!skb)
> return -ENOMEM;
> @@ -5341,6 +5386,8 @@ const struct ethtool_ops bnxt_ethtool_ops = {
> .get_link_ext_stats = bnxt_get_link_ext_stats,
> .get_eee = bnxt_get_eee,
> .set_eee = bnxt_set_eee,
> + .get_tunable = bnxt_get_tunable,
> + .set_tunable = bnxt_set_tunable,
> .get_module_info = bnxt_get_module_info,
> .get_module_eeprom = bnxt_get_module_eeprom,
> .get_module_eeprom_by_page = bnxt_get_module_eeprom_by_page,
> --
> 2.34.1
>
Powered by blists - more mailing lists