netdev - Re: [PATCH] net: phy: phy_ethtool_ksettings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <3b98a7c5-b8bf-4e96-b969-da1800813251@lunn.ch>
Date: Mon, 2 Dec 2024 15:32:19 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Nikita Yushchenko <nikita.yoush@...entembedded.com>
Cc: "Russell King (Oracle)" <linux@...linux.org.uk>,
	Maxime Chevallier <maxime.chevallier@...tlin.com>,
	Heiner Kallweit <hkallweit1@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
	Michael Dege <michael.dege@...esas.com>,
	Christian Mardmoeller <christian.mardmoeller@...esas.com>,
	Dennis Ostermann <dennis.ostermann@...esas.com>
Subject: Re: [PATCH] net: phy: phy_ethtool_ksettings_set: Allow any supported
 speed

On Mon, Dec 02, 2024 at 04:09:43PM +0500, Nikita Yushchenko wrote:
> > > Right now, 'ethtool -s tsn0 master-slave forced-slave' causes a call to
> > > driver's ethtool set_link_ksettings method. Which does error out for me
> > > because at the call time, speed field is 2500.
> > 
> > Are you saying that the PHY starts in fixed-speed 2.5G mode?
> > 
> > What does ethtool tsn0 say after boot and the link has come up but
> > before any ethtool settings are changed?
> 
> On a freshly booted board, with /etc/systemd/network temporary moved away.
> 
> (there are two identical boards, connected to each other)
> 
> root@...-033:~# ip l show dev tsn0
> 19: tsn0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
>     link/ether 3a:e3:5c:56:ba:bd brd ff:ff:ff:ff:ff:ff
> 
> root@...-033:~# ethtool tsn0
> Settings for tsn0:
>         Supported ports: [ MII ]
>         Supported link modes:   2500baseT/Full

If it is a T1 PHY, we want it reporting 25000BaseT1/Full here.  Having
T1 then probably allows us to unlock forced master/slave without
autoneg, and setting speeds above 1G without autoneg.

Given this is an out of tree driver, i can understand why it does not,
it means patching a number of in tree files.

https://www.marvell.com/products/automotive/88q4364.html

says it can actually do 2.5G/5G/10GBASE-T1 as defined by the IEEE
802.3ch standard.

I would be reluctant to make changes to phylib without a kernel
quality PHY driver queued for merging. So you might want to spend some
time cleaning up the code. FYI: I've not looked at 802.3ch, but if
that defines registers, i would expect the driver patches to actually
be split into helpers for standard defined registers any 3ch driver
can use, and a PHY driver gluing those together and accessing marvell
specific registers.

	 Andrew