netdev - Re: [PATCH] net: phy: phy_ethtool_ksettings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <5cef26d0-b24f-48c6-a5e0-f7c9bd0cefec@cogentembedded.com>
Date: Mon, 2 Dec 2024 20:51:44 +0500
From: Nikita Yushchenko <nikita.yoush@...entembedded.com>
To: "Russell King (Oracle)" <linux@...linux.org.uk>
Cc: Maxime Chevallier <maxime.chevallier@...tlin.com>,
 Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
 "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
 Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
 netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
 Michael Dege <michael.dege@...esas.com>,
 Christian Mardmoeller <christian.mardmoeller@...esas.com>,
 Dennis Ostermann <dennis.ostermann@...esas.com>
Subject: Re: [PATCH] net: phy: phy_ethtool_ksettings_set: Allow any supported
 speed

>> root@...-033:~# ethtool tsn0
>> Settings for tsn0:
>>          Supported ports: [ MII ]
>>          Supported link modes:   2500baseT/Full
>>          Supported pause frame use: Symmetric Receive-only
>>          Supports auto-negotiation: No
> 
> Okay, the PHY can apparently only operate in fixed mode, although I
> would suggest checking that is actually the case. I suspect that may
> be a driver bug, especially as...

My contacts from Renesas say that this PHY chip is an engineering sample.

I'm not sure about the origin of "driver" for this. I did not look inside before, but now I did, and it 
is almost completely a stub. Even no init sequence. The only hw operations that this stub does are
(1) reading bit 0 of register 1.0901 and returning it as link status (phydev->link),
(2) reading bit 0 of register 1.0000 and returning it as master/slave setting (phydev->master_slave_get 
/ phydev->master_slave_state)
(3) applying phydev->master_slave_set via writing to bit 0 of register 1.0000 and then writing 0x200 to 
register 7.0200

Per standard, writing 0x200 to 7.0200 is autoneg restart, however bit 0 of 1.0000 has nothing to do with 
master/slave. So what device actually does is unclear. Just a black box that provides 2.5G Base-T1 
signalling, and software-wise can only report link and accept master-slave configuration.

Not sure if supporting this sort of black box worths kernel changes.

> it changes phydev->duplex, which is _not_ supposed to happen if
> negotiation has been disabled.

There are no writes to phydev->duplex inside the "driver".
Something in the phy core is changing it.