[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250121044138.2883912-3-hayashi.kunihiko@socionext.com>
Date: Tue, 21 Jan 2025 13:41:37 +0900
From: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
To: Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>
Cc: Furong Xu <0x1207@...il.com>,
Joao Pinto <Joao.Pinto@...opsys.com>,
Vince Bridgers <vbridger@...nsource.altera.com>,
netdev@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
Subject: [PATCH net v2 2/3] net: stmmac: Limit FIFO size by hardware capability
Tx/Rx FIFO size is specified by the parameter "{tx,rx}-fifo-depth" from
stmmac_platform layer.
However, these values are constrained by upper limits determined by the
capabilities of each hardware feature. There is a risk that the upper
bits will be truncated due to the calculation, so it's appropriate to
limit them to the upper limit values and display a warning message.
Fixes: e7877f52fd4a ("stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 251a8c15637f..da3316e3e93b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7245,6 +7245,19 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
priv->plat->tx_queues_to_use = priv->dma_cap.number_tx_queues;
}
+ if (priv->plat->rx_fifo_size > priv->dma_cap.rx_fifo_size) {
+ dev_warn(priv->device,
+ "Rx FIFO size exceeds dma capability (%d)\n",
+ priv->plat->rx_fifo_size);
+ priv->plat->rx_fifo_size = priv->dma_cap.rx_fifo_size;
+ }
+ if (priv->plat->tx_fifo_size > priv->dma_cap.tx_fifo_size) {
+ dev_warn(priv->device,
+ "Tx FIFO size exceeds dma capability (%d)\n",
+ priv->plat->tx_fifo_size);
+ priv->plat->tx_fifo_size = priv->dma_cap.tx_fifo_size;
+ }
+
priv->hw->vlan_fail_q_en =
(priv->plat->flags & STMMAC_FLAG_VLAN_FAIL_Q_EN);
priv->hw->vlan_fail_q = priv->plat->vlan_fail_q;
--
2.25.1
Powered by blists - more mailing lists