netdev - [PATCH net v2 3/3] net: stmmac: Specify hardware capability value when FIFO size isn't specified

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250121044138.2883912-4-hayashi.kunihiko@socionext.com>
Date: Tue, 21 Jan 2025 13:41:38 +0900
From: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
To: Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Jose Abreu <joabreu@...opsys.com>,
	Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Maxime Coquelin <mcoquelin.stm32@...il.com>
Cc: Furong Xu <0x1207@...il.com>,
	Joao Pinto <Joao.Pinto@...opsys.com>,
	Vince Bridgers <vbridger@...nsource.altera.com>,
	netdev@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
Subject: [PATCH net v2 3/3] net: stmmac: Specify hardware capability value when FIFO size isn't specified

When Tx/Rx FIFO size is not specified in advance, the driver checks if the
value is zero and sets the hardware capability value in functions where
that value is used.

This sets the hardware capability value as a default and removes redundant
statements.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 21 ++++++-------------
 1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index da3316e3e93b..486283c27963 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2375,11 +2375,6 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
 	u32 chan = 0;
 	u8 qmode = 0;
 
-	if (rxfifosz == 0)
-		rxfifosz = priv->dma_cap.rx_fifo_size;
-	if (txfifosz == 0)
-		txfifosz = priv->dma_cap.tx_fifo_size;
-
 	/* Split up the shared Tx/Rx FIFO memory on DW QoS Eth and DW XGMAC */
 	if (priv->plat->has_gmac4 || priv->plat->has_xgmac) {
 		rxfifosz /= rx_channels_count;
@@ -2851,11 +2846,6 @@ static void stmmac_set_dma_operation_mode(struct stmmac_priv *priv, u32 txmode,
 	int rxfifosz = priv->plat->rx_fifo_size;
 	int txfifosz = priv->plat->tx_fifo_size;
 
-	if (rxfifosz == 0)
-		rxfifosz = priv->dma_cap.rx_fifo_size;
-	if (txfifosz == 0)
-		txfifosz = priv->dma_cap.tx_fifo_size;
-
 	/* Adjust for real per queue fifo size */
 	rxfifosz /= rx_channels_count;
 	txfifosz /= tx_channels_count;
@@ -5856,9 +5846,6 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
 	const int mtu = new_mtu;
 	int ret;
 
-	if (txfifosz == 0)
-		txfifosz = priv->dma_cap.tx_fifo_size;
-
 	txfifosz /= priv->plat->tx_queues_to_use;
 
 	if (stmmac_xdp_is_enabled(priv) && new_mtu > ETH_DATA_LEN) {
@@ -7245,13 +7232,17 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
 		priv->plat->tx_queues_to_use = priv->dma_cap.number_tx_queues;
 	}
 
-	if (priv->plat->rx_fifo_size > priv->dma_cap.rx_fifo_size) {
+	if (!priv->plat->rx_fifo_size) {
+		priv->plat->rx_fifo_size = priv->dma_cap.rx_fifo_size;
+	} else if (priv->plat->rx_fifo_size > priv->dma_cap.rx_fifo_size) {
 		dev_warn(priv->device,
 			 "Rx FIFO size exceeds dma capability (%d)\n",
 			 priv->plat->rx_fifo_size);
 		priv->plat->rx_fifo_size = priv->dma_cap.rx_fifo_size;
 	}
-	if (priv->plat->tx_fifo_size > priv->dma_cap.tx_fifo_size) {
+	if (!priv->plat->tx_fifo_size) {
+		priv->plat->tx_fifo_size = priv->dma_cap.tx_fifo_size;
+	} else if (priv->plat->tx_fifo_size > priv->dma_cap.tx_fifo_size) {
 		dev_warn(priv->device,
 			 "Tx FIFO size exceeds dma capability (%d)\n",
 			 priv->plat->tx_fifo_size);
-- 
2.25.1