netdev - [RFC PATCH net-next v3 5/7] tsnep: Select speed for loopback

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250124220516.113798-6-gerhard@engleder-embedded.com>
Date: Fri, 24 Jan 2025 23:05:14 +0100
From: Gerhard Engleder <gerhard@...leder-embedded.com>
To: andrew@...n.ch,
	hkallweit1@...il.com,
	linux@...linux.org.uk,
	davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com
Cc: netdev@...r.kernel.org,
	Gerhard Engleder <gerhard@...leder-embedded.com>
Subject: [RFC PATCH net-next v3 5/7] tsnep: Select speed for loopback

Use 100 Mbps only if the PHY is configured to this speed. Otherwise use
always the maximum speed of 1000 Mbps.

Also remove explicit setting of carrier on and link mode after loopback.
This is not needed anymore, because phy_loopback() with selected speed
signals the link and the speed to the MAC.

Signed-off-by: Gerhard Engleder <gerhard@...leder-embedded.com>
---
 drivers/net/ethernet/engleder/tsnep_main.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/engleder/tsnep_main.c b/drivers/net/ethernet/engleder/tsnep_main.c
index a16b12137edb..d77a5b423c4c 100644
--- a/drivers/net/ethernet/engleder/tsnep_main.c
+++ b/drivers/net/ethernet/engleder/tsnep_main.c
@@ -228,20 +228,19 @@ static void tsnep_phy_link_status_change(struct net_device *netdev)
 
 static int tsnep_phy_loopback(struct tsnep_adapter *adapter, bool enable)
 {
-	int retval;
-
-	retval = phy_loopback(adapter->phydev, enable, 0);
+	int speed;
 
-	/* PHY link state change is not signaled if loopback is enabled, it
-	 * would delay a working loopback anyway, let's ensure that loopback
-	 * is working immediately by setting link mode directly
-	 */
-	if (!retval && enable) {
-		netif_carrier_on(adapter->netdev);
-		tsnep_set_link_mode(adapter);
+	if (enable) {
+		if (adapter->phydev->autoneg == AUTONEG_DISABLE &&
+		    adapter->phydev->speed == SPEED_100)
+			speed = SPEED_100;
+		else
+			speed = SPEED_1000;
+	} else {
+		speed = 0;
 	}
 
-	return retval;
+	return phy_loopback(adapter->phydev, enable, speed);
 }
 
 static int tsnep_phy_open(struct tsnep_adapter *adapter)
-- 
2.39.5