[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250225094049.20142-3-liuhangbin@gmail.com>
Date: Tue, 25 Feb 2025 09:40:48 +0000
From: Hangbin Liu <liuhangbin@...il.com>
To: netdev@...r.kernel.org
Cc: Jay Vosburgh <jv@...sburgh.net>,
Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Nikolay Aleksandrov <razor@...ckwall.org>,
Simon Horman <horms@...nel.org>,
Shuah Khan <shuah@...nel.org>,
Tariq Toukan <tariqt@...dia.com>,
Jianbo Liu <jianbol@...dia.com>,
Jarod Wilson <jarod@...hat.com>,
Steffen Klassert <steffen.klassert@...unet.com>,
Cosmin Ratiu <cratiu@...dia.com>,
linux-kselftest@...r.kernel.org,
linux-kernel@...r.kernel.org,
Hangbin Liu <liuhangbin@...il.com>
Subject: [PATCHv2 net 2/3] bonding: fix xfrm offload feature setup on active-backup mode
The active-backup bonding mode supports XFRM ESP offload. However, when
a bond is added using command like `ip link add bond0 type bond mode 1
miimon 100`, the `ethtool -k` command shows that the XFRM ESP offload is
disabled. This occurs because, in bond_newlink(), we change bond link
first and register bond device later. So the XFRM feature update in
bond_option_mode_set() is not called as the bond device is not yet
registered, leading to the offload feature not being set successfully.
To resolve this issue, we can modify the code order in bond_newlink() to
ensure that the bond device is registered first before changing the bond
link parameters. This change will allow the XFRM ESP offload feature to be
correctly enabled.
Fixes: 007ab5345545 ("bonding: fix feature flag setting at init time")
Signed-off-by: Hangbin Liu <liuhangbin@...il.com>
---
drivers/net/bonding/bond_main.c | 2 +-
drivers/net/bonding/bond_netlink.c | 16 +++++++++-------
include/net/bonding.h | 1 +
3 files changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index cc7064aa4b35..881d8d94dd9f 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4410,7 +4410,7 @@ void bond_work_init_all(struct bonding *bond)
INIT_DELAYED_WORK(&bond->slave_arr_work, bond_slave_arr_handler);
}
-static void bond_work_cancel_all(struct bonding *bond)
+void bond_work_cancel_all(struct bonding *bond)
{
cancel_delayed_work_sync(&bond->mii_work);
cancel_delayed_work_sync(&bond->arp_work);
diff --git a/drivers/net/bonding/bond_netlink.c b/drivers/net/bonding/bond_netlink.c
index 2a6a424806aa..ed16af6db557 100644
--- a/drivers/net/bonding/bond_netlink.c
+++ b/drivers/net/bonding/bond_netlink.c
@@ -568,18 +568,20 @@ static int bond_newlink(struct net *src_net, struct net_device *bond_dev,
struct nlattr *tb[], struct nlattr *data[],
struct netlink_ext_ack *extack)
{
+ struct bonding *bond = netdev_priv(bond_dev);
int err;
- err = bond_changelink(bond_dev, tb, data, extack);
- if (err < 0)
+ err = register_netdevice(bond_dev);
+ if (err)
return err;
- err = register_netdevice(bond_dev);
- if (!err) {
- struct bonding *bond = netdev_priv(bond_dev);
+ netif_carrier_off(bond_dev);
+ bond_work_init_all(bond);
- netif_carrier_off(bond_dev);
- bond_work_init_all(bond);
+ err = bond_changelink(bond_dev, tb, data, extack);
+ if (err) {
+ bond_work_cancel_all(bond);
+ unregister_netdevice(bond_dev);
}
return err;
diff --git a/include/net/bonding.h b/include/net/bonding.h
index d54ba5e3affb..aa326fd90eba 100644
--- a/include/net/bonding.h
+++ b/include/net/bonding.h
@@ -713,6 +713,7 @@ struct bond_vlan_tag *bond_verify_device_path(struct net_device *start_dev,
int bond_update_slave_arr(struct bonding *bond, struct slave *skipslave);
void bond_slave_arr_work_rearm(struct bonding *bond, unsigned long delay);
void bond_work_init_all(struct bonding *bond);
+void bond_work_cancel_all(struct bonding *bond);
#ifdef CONFIG_PROC_FS
void bond_create_proc_entry(struct bonding *bond);
--
2.46.0
Powered by blists - more mailing lists