netdev - Re: [PATCH 1/2] net: enc28j60: support getting irq number from gpio phandle in the device tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <c8553dc9-2d8f-4d4b-a381-f87660c2ee99@lunn.ch>
Date: Mon, 10 Mar 2025 13:18:59 +0100
From: Andrew Lunn <andrew@...n.ch>
To: hanyuan <hanyuan-z@...com>
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] net: enc28j60: support getting irq number from gpio
 phandle in the device tree

> My embedded platform has limited support, it only provides a
> hard-coded pin control driver and does not support configuring
> pinctrl properties in the device tree. So, there is no generic
> way to request the pin and set its direction via device tree bindings.

So it sounds like that is your real problem. Please write a proper
pinctrl driver for the SoC you are using. They are not very complex
drivers.

    Andrew

---
pw-bot: cr