netdev - Re: [PATCH 1/2] net: enc28j60: support getting irq number from gpio phandle in the device tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <tencent_7C72D4006818B37C695B066E0AFD5F94380A@qq.com>
Date: Mon, 10 Mar 2025 20:25:36 +0800
From: hanyuan <hanyuan-z@...com>
To: Andrew Lunn <andrew@...n.ch>
Cc: netdev@...r.kernel.org,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] net: enc28j60: support getting irq number from gpio
 phandle in the device tree


> 2025年3月10日 20:18，Andrew Lunn <andrew@...n.ch> 写道：
> 
>> My embedded platform has limited support, it only provides a
>> hard-coded pin control driver and does not support configuring
>> pinctrl properties in the device tree. So, there is no generic
>> way to request the pin and set its direction via device tree bindings.
> 
> So it sounds like that is your real problem. Please write a proper
> pinctrl driver for the SoC you are using. They are not very complex
> drivers.
> 
>    Andrew
> 
> ---
> pw-bot: cr

Hi

Sorry for my previous low level mistake on the email format and
thanks again for your patience. I agree with you and please ignore
my patches.

Hanyuan