netdev - [PATCH net v2 5/5] net: dsa: b53: do not touch DLL

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250602193953.1010487-6-jonas.gorski@gmail.com>
Date: Mon,  2 Jun 2025 21:39:53 +0200
From: Jonas Gorski <jonas.gorski@...il.com>
To: Florian Fainelli <florian.fainelli@...adcom.com>,
	Andrew Lunn <andrew@...n.ch>,
	Vladimir Oltean <olteanv@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Vivien Didelot <vivien.didelot@...il.com>,
	Álvaro Fernández Rojas <noltari@...il.com>
Cc: Florian Fainelli <f.fainelli@...il.com>,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH net v2 5/5] net: dsa: b53: do not touch DLL_IQQD on bcm53115

According to OpenMDK, bit 2 of the RGMII register has a different
meaning for BCM53115 [1]:

"DLL_IQQD         1: In the IDDQ mode, power is down0: Normal function
                  mode"

Configuring RGMII delay works without setting this bit, so let's keep it
at the default. For other chips, we always set it, so not clearing it
is not an issue.

One would assume BCM53118 works the same, but OpenMDK is not quite sure
what this bit actually means [2]:

"BYPASS_IMP_2NS_DEL #1: In the IDDQ mode, power is down#0: Normal
                    function mode1: Bypass dll65_2ns_del IP0: Use
                    dll65_2ns_del IP"

So lets keep setting it for now.

[1] https://github.com/Broadcom-Network-Switching-Software/OpenMDK/blob/master/cdk/PKG/chip/bcm53115/bcm53115_a0_defs.h#L19871
[2] https://github.com/Broadcom-Network-Switching-Software/OpenMDK/blob/master/cdk/PKG/chip/bcm53118/bcm53118_a0_defs.h#L14392

Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Jonas Gorski <jonas.gorski@...il.com>
---
v1 -> v2:
* new patch

 drivers/net/dsa/b53/b53_common.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index be4493b769f4..862bdccb7439 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1354,8 +1354,7 @@ static void b53_adjust_531x5_rgmii(struct dsa_switch *ds, int port,
 	 * tx_clk aligned timing (restoring to reset defaults)
 	 */
 	b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
-	rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
-			RGMII_CTRL_TIMING_SEL);
+	rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC);
 
 	/* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
 	 * sure that we enable the port TX clock internal delay to
@@ -1375,7 +1374,10 @@ static void b53_adjust_531x5_rgmii(struct dsa_switch *ds, int port,
 		rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
 	if (interface == PHY_INTERFACE_MODE_RGMII)
 		rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
-	rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
+
+	if (dev->chip_id != BCM53115_DEVICE_ID)
+		rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
+
 	b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
 
 	dev_info(ds->dev, "Configured port %d for %s\n", port,
-- 
2.43.0