netdev - [PATCH net v2 4/5] net: dsa: b53: allow RGMII for bcm63xx RGMII ports

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250602193953.1010487-5-jonas.gorski@gmail.com>
Date: Mon,  2 Jun 2025 21:39:52 +0200
From: Jonas Gorski <jonas.gorski@...il.com>
To: Florian Fainelli <florian.fainelli@...adcom.com>,
	Andrew Lunn <andrew@...n.ch>,
	Vladimir Oltean <olteanv@...il.com>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Vivien Didelot <vivien.didelot@...il.com>,
	Álvaro Fernández Rojas <noltari@...il.com>
Cc: Florian Fainelli <f.fainelli@...il.com>,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH net v2 4/5] net: dsa: b53: allow RGMII for bcm63xx RGMII ports

Add RGMII to supported interfaces for BCM63xx RGMII ports so they can be
actually used in RGMII mode.

Without this, phylink will fail to configure them:

[    3.580000] b53-switch 10700000.switch GbE3 (uninitialized): validation of rgmii with support 0000000,00000000,00000000,000062ff and advertisement 0000000,00000000,00000000,000062ff failed: -EINVAL
[    3.600000] b53-switch 10700000.switch GbE3 (uninitialized): failed to connect to PHY: -EINVAL
[    3.610000] b53-switch 10700000.switch GbE3 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 4

Fixes: ce3bf94871f7 ("net: dsa: b53: add support for BCM63xx RGMIIs")
Reviewed-by: Florian Fainelli <florian.fainelli@...adcom.com>
Signed-off-by: Jonas Gorski <jonas.gorski@...il.com>
---
v1 -> v2:
* add reviewed-by
* do not enable RGMII for CPU port (internal only, no rgmii)

 drivers/net/dsa/b53/b53_common.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 3f4934f974c8..be4493b769f4 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1439,6 +1439,10 @@ static void b53_phylink_get_caps(struct dsa_switch *ds, int port,
 	__set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
 	__set_bit(PHY_INTERFACE_MODE_REVMII, config->supported_interfaces);
 
+	/* BCM63xx RGMII ports support RGMII */
+	if (is63xx(dev) && in_range(port, B53_63XX_RGMII0, 4))
+		phy_interface_set_rgmii(config->supported_interfaces);
+
 	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
 		MAC_10 | MAC_100;
 
-- 
2.43.0