[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <65f5e6e9-f02e-4374-9f17-bc833fac2316@lunn.ch>
Date: Mon, 2 Jun 2025 16:50:00 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Frank Li <Frank.Li@....com>
Cc: Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
"open list:NETWORKING DRIVERS" <netdev@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>, imx@...ts.linux.dev
Subject: Re: [PATCH 1/1] dt-bindings: net: convert nxp,lpc1850-dwmac.txt to
yaml format
> +examples:
> + - |
> + #include <dt-bindings/clock/lpc18xx-ccu.h>
> +
> + ethernet@...10000 {
> + compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
> + reg = <0x40010000 0x2000>;
> + interrupts = <5>;
> + interrupt-names = "macirq";
> + clocks = <&ccu1 CLK_CPU_ETHERNET>;
> + clock-names = "stmmaceth";
> + resets = <&rgu 22>;
> + reset-names = "stmmaceth";
> + phy-mode = "rgmii";
Please don't use 'rgmii' in an example, because it is 99% of the time
wrong. You are just encouraging developers to copy/paste this into
real DT blobs, and then i need to point out it is wrong. Use
'rgmii-id', which is much more likely to be correct.
Andrew
Powered by blists - more mailing lists