[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <857bf36b-6bc7-44f8-bb5e-7c9460e4ef1c@molgen.mpg.de>
Date: Sat, 30 Aug 2025 00:07:26 +0200
From: Paul Menzel <pmenzel@...gen.mpg.de>
To: Madhu Chittim <madhu.chittim@...el.com>
Cc: intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org,
horms@...nel.org, linux-pci@...r.kernel.org
Subject: Re: [Intel-wired-lan] [PATCH net-next v3] idpf: add support for IDPF
PCI programming interface
[Cc: +linux-pci@...r.kernel.org]
Dear Madhu, dear Pavan,
Thank you for the patch.
Am 29.08.25 um 19:24 schrieb Madhu Chittim:
> From: Pavan Kumar Linga <pavan.kumar.linga@...el.com>
>
> At present IDPF supports only 0x1452 and 0x145C as PF and VF device IDs
> on our current generation hardware. Future hardware exposes a new set of
> device IDs for each generation. To avoid adding a new device ID for each
> generation and to make the driver forward and backward compatible,
> make use of the IDPF PCI programming interface to load the driver.
>
> Write and read the VF_ARQBAL mailbox register to find if the current
> device is a PF or a VF.
>
> PCI SIG allocated a new programming interface for the IDPF compliant
> ethernet network controller devices. It can be found at:
> https://members.pcisig.com/wg/PCI-SIG/document/20113
> with the document titled as 'PCI Code and ID Assignment Revision 1.16'
> or any latest revisions.
Could you please add some information, how you tested this?
> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@...el.com>
> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@...el.com>
> Signed-off-by: Madhu Chittim <madhu.chittim@...el.com>
>
> ---
> v3:
> - reworked logic to avoid gotos
>
> v2:
> - replace *u8 with *bool in idpf_is_vf_device function parameter
> - use ~0 instead of 0xffffff in PCI_DEVICE_CLASS parameter
>
> ---
>
> Signed-off-by: Madhu Chittim <madhu.chittim@...el.com>
This looks like a stray line, but will probably be ignored, when applied.
> ---
> drivers/net/ethernet/intel/idpf/idpf.h | 1 +
> drivers/net/ethernet/intel/idpf/idpf_main.c | 73 ++++++++++++++-----
> drivers/net/ethernet/intel/idpf/idpf_vf_dev.c | 37 ++++++++++
> 3 files changed, 94 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/net/ethernet/intel/idpf/idpf.h b/drivers/net/ethernet/intel/idpf/idpf.h
> index c56abf8b4c92..4a16e481faf7 100644
> --- a/drivers/net/ethernet/intel/idpf/idpf.h
> +++ b/drivers/net/ethernet/intel/idpf/idpf.h
> @@ -1041,6 +1041,7 @@ void idpf_mbx_task(struct work_struct *work);
> void idpf_vc_event_task(struct work_struct *work);
> void idpf_dev_ops_init(struct idpf_adapter *adapter);
> void idpf_vf_dev_ops_init(struct idpf_adapter *adapter);
> +int idpf_is_vf_device(struct pci_dev *pdev, bool *is_vf);
> int idpf_intr_req(struct idpf_adapter *adapter);
> void idpf_intr_rel(struct idpf_adapter *adapter);
> u16 idpf_get_max_tx_hdr_size(struct idpf_adapter *adapter);
> diff --git a/drivers/net/ethernet/intel/idpf/idpf_main.c b/drivers/net/ethernet/intel/idpf/idpf_main.c
> index 8c46481d2e1f..493604d50143 100644
> --- a/drivers/net/ethernet/intel/idpf/idpf_main.c
> +++ b/drivers/net/ethernet/intel/idpf/idpf_main.c
> @@ -7,11 +7,57 @@
>
> #define DRV_SUMMARY "Intel(R) Infrastructure Data Path Function Linux Driver"
>
> +#define IDPF_NETWORK_ETHERNET_PROGIF 0x01
> +#define IDPF_CLASS_NETWORK_ETHERNET_PROGIF \
> + (PCI_CLASS_NETWORK_ETHERNET << 8 | IDPF_NETWORK_ETHERNET_PROGIF)
> +
> MODULE_DESCRIPTION(DRV_SUMMARY);
> MODULE_IMPORT_NS("LIBETH");
> MODULE_IMPORT_NS("LIBETH_XDP");
> MODULE_LICENSE("GPL");
>
> +/**
> + * idpf_dev_init - Initialize device specific parameters
> + * @adapter: adapter to initialize
> + * @ent: entry in idpf_pci_tbl
> + *
> + * Return: %0 on success, -%errno on failure.
> + */
> +static int idpf_dev_init(struct idpf_adapter *adapter,
> + const struct pci_device_id *ent)
> +{
> + bool is_vf = false;
> + int err;
> +
> + if (ent->class == IDPF_CLASS_NETWORK_ETHERNET_PROGIF) {
> + err = idpf_is_vf_device(adapter->pdev, &is_vf);
> + if (err)
> + return err;
> + if (is_vf) {
> + idpf_vf_dev_ops_init(adapter);
> + adapter->crc_enable = true;
> + } else {
> + idpf_dev_ops_init(adapter);
> + }
> +
> + return 0;
> + }
> +
> + switch (ent->device) {
> + case IDPF_DEV_ID_PF:
> + idpf_dev_ops_init(adapter);
> + break;
> + case IDPF_DEV_ID_VF:
> + idpf_vf_dev_ops_init(adapter);
> + adapter->crc_enable = true;
> + break;
> + default:
> + return -ENODEV;
> + }
> +
> + return 0;
> +}
> +
> /**
> * idpf_remove - Device removal routine
> * @pdev: PCI device information struct
> @@ -165,21 +211,6 @@ static int idpf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> adapter->req_tx_splitq = true;
> adapter->req_rx_splitq = true;
>
> - switch (ent->device) {
> - case IDPF_DEV_ID_PF:
> - idpf_dev_ops_init(adapter);
> - break;
> - case IDPF_DEV_ID_VF:
> - idpf_vf_dev_ops_init(adapter);
> - adapter->crc_enable = true;
> - break;
> - default:
> - err = -ENODEV;
> - dev_err(&pdev->dev, "Unexpected dev ID 0x%x in idpf probe\n",
> - ent->device);
> - goto err_free;
> - }
> -
> adapter->pdev = pdev;
> err = pcim_enable_device(pdev);
> if (err)
> @@ -259,11 +290,18 @@ static int idpf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> /* setup msglvl */
> adapter->msg_enable = netif_msg_init(-1, IDPF_AVAIL_NETIF_M);
>
> + err = idpf_dev_init(adapter, ent);
> + if (err) {
> + dev_err(&pdev->dev, "Unexpected dev ID 0x%x in idpf probe\n",
> + ent->device);
> + goto destroy_vc_event_wq;
> + }
> +
> err = idpf_cfg_hw(adapter);
> if (err) {
> dev_err(dev, "Failed to configure HW structure for adapter: %d\n",
> err);
> - goto err_cfg_hw;
> + goto destroy_vc_event_wq;
> }
>
> mutex_init(&adapter->vport_ctrl_lock);
> @@ -284,7 +322,7 @@ static int idpf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>
> return 0;
>
> -err_cfg_hw:
> +destroy_vc_event_wq:
> destroy_workqueue(adapter->vc_event_wq);
> err_vc_event_wq_alloc:
> destroy_workqueue(adapter->stats_wq);
> @@ -304,6 +342,7 @@ static int idpf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
> static const struct pci_device_id idpf_pci_tbl[] = {
> { PCI_VDEVICE(INTEL, IDPF_DEV_ID_PF)},
> { PCI_VDEVICE(INTEL, IDPF_DEV_ID_VF)},
> + { PCI_DEVICE_CLASS(IDPF_CLASS_NETWORK_ETHERNET_PROGIF, ~0)},
> { /* Sentinel */ }
> };
> MODULE_DEVICE_TABLE(pci, idpf_pci_tbl);
> diff --git a/drivers/net/ethernet/intel/idpf/idpf_vf_dev.c b/drivers/net/ethernet/intel/idpf/idpf_vf_dev.c
> index 7527b967e2e7..09cccdf45b50 100644
> --- a/drivers/net/ethernet/intel/idpf/idpf_vf_dev.c
> +++ b/drivers/net/ethernet/intel/idpf/idpf_vf_dev.c
> @@ -7,6 +7,43 @@
>
> #define IDPF_VF_ITR_IDX_SPACING 0x40
>
> +#define IDPF_VF_TEST_VAL 0xFEED0000
> +
> +/**
> + * idpf_is_vf_device - Helper to find if it is a VF device
> + * @pdev: PCI device information struct
> + * @is_vf: used to update VF device status
> + *
> + * Return: %0 on success, -%errno on failure.
> + */
> +int idpf_is_vf_device(struct pci_dev *pdev, bool *is_vf)
> +{
> + struct resource mbx_region;
> + resource_size_t mbx_start;
> + void __iomem *mbx_addr;
> + long len;
Use size_t?
include/linux/ioport.h:static inline resource_size_t
resource_size(const struct resource *res)
> +
> + resource_set_range(&mbx_region, VF_BASE, IDPF_VF_MBX_REGION_SZ);
> +
> + mbx_start = pci_resource_start(pdev, 0) + mbx_region.start;
> + len = resource_size(&mbx_region);
> +
> + mbx_addr = ioremap(mbx_start, len);
> + if (!mbx_addr)
> + return -EIO;
Should some kind of error be printed with a hint, what the user could do?
> +
> + writel(IDPF_VF_TEST_VAL, mbx_addr + VF_ARQBAL - VF_BASE);
> +
> + /* Force memory write to complete before reading it back */
> + wmb();
> +
> + *is_vf = readl(mbx_addr + VF_ARQBAL - VF_BASE) == IDPF_VF_TEST_VAL;
> +
> + iounmap(mbx_addr);
> +
> + return 0;
> +}
> +
> /**
> * idpf_vf_ctlq_reg_init - initialize default mailbox registers
> * @adapter: adapter structure
Powered by blists - more mailing lists