netdev - Re: [PATCH 2/9] dt-bindings: net: qcom: document the ethqos device for SCMI-based systems

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <24cd127d-1be7-42f4-a2ec-697c5e7554db@lunn.ch>
Date: Wed, 10 Sep 2025 18:04:28 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Bartosz Golaszewski <brgl@...ev.pl>
Cc: Bjorn Andersson <andersson@...nel.org>,
	Konrad Dybcio <konradybcio@...nel.org>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Richard Cochran <richardcochran@...il.com>,
	Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Maxime Coquelin <mcoquelin.stm32@...il.com>,
	Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Vinod Koul <vkoul@...nel.org>,
	Giuseppe Cavallaro <peppe.cavallaro@...com>,
	Jose Abreu <joabreu@...opsys.com>, linux-arm-msm@...r.kernel.org,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
	linux-arm-kernel@...ts.infradead.org,
	Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: [PATCH 2/9] dt-bindings: net: qcom: document the ethqos device
 for SCMI-based systems

> +    ethernet: ethernet@...0000 {
> +        compatible = "qcom,sa8255p-ethqos";
> +        reg = <0x23040000 0x10000>,
> +              <0x23056000 0x100>;
> +        reg-names = "stmmaceth", "rgmii";
> +
> +        iommus = <&apps_smmu 0x120 0x7>;
> +
> +        interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-names = "macirq", "sfty";
> +
> +        dma-coherent;
> +
> +        snps,tso;
> +        snps,pbl = <32>;
> +        rx-fifo-depth = <16384>;
> +        tx-fifo-depth = <16384>;
> +
> +        phy-handle = <&sgmii_phy1>;
> +        phy-mode = "2500base-x";

Nitpicking: It is clearly not an SGMII PHY if it support
2500BaseX. You might want to give the node a better name.

> +        snps,mtl-rx-config = <&mtl_rx_setup1>;
> +        snps,mtl-tx-config = <&mtl_tx_setup1>;
> +        snps,ps-speed = <1000>;

Since this MAC can do 2.5G, is 1000 correct here?

      Andrew