[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <pwnt6obqsyq3o2qzqk5fcydzlhwv7ycmywvdeo5pwhvt6kbw35@ce36yjyo3hp4>
Date: Tue, 16 Sep 2025 18:11:40 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Wasim Nazir <wasim.nazir@....qualcomm.com>
Cc: Ulf Hansson <ulf.hansson@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Richard Cochran <richardcochran@...il.com>,
Bartosz Golaszewski <brgl@...ev.pl>, kernel@....qualcomm.com,
linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
netdev@...r.kernel.org, linux-i2c@...r.kernel.org,
Viken Dadhaniya <viken.dadhaniya@....qualcomm.com>
Subject: Re: [PATCH v6 02/10] arm64: dts: qcom: lemans-evk: Enable GPI DMA
and QUPv3 controllers
On Tue, Sep 16, 2025 at 08:29:24PM +0530, Wasim Nazir wrote:
> From: Viken Dadhaniya <viken.dadhaniya@....qualcomm.com>
>
> Enable GPI DMA controllers (gpi_dma0, gpi_dma1, gpi_dma2) and QUPv3
> interfaces (qupv3_id_0, qupv3_id_2) in the device tree to support
> DMA and peripheral communication on the Lemans EVK platform.
>
> qupv3_id_0 is used for I2C, SPI, UART, and slots 0 to 5.
> qupv3_id_2 is used for I2C, SPI, UART, and slots 14 to 20.
Don't rush sending the next iteration until the discussions have been
sorted out.
>
> Signed-off-by: Viken Dadhaniya <viken.dadhaniya@....qualcomm.com>
> Signed-off-by: Wasim Nazir <wasim.nazir@....qualcomm.com>
> ---
> arch/arm64/boot/dts/qcom/lemans-evk.dts | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists