| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f3b81f01-8b82-4df7-88f3-a17ec846d21e@amd.com>
Date: Thu, 25 Sep 2025 10:21:07 +0100
From: Alejandro Lucero Palau <alucerop@....com>
To: Dave Jiang <dave.jiang@...el.com>, alejandro.lucero-palau@....com,
linux-cxl@...r.kernel.org, netdev@...r.kernel.org, dan.j.williams@...el.com,
edward.cree@....com, davem@...emloft.net, kuba@...nel.org,
pabeni@...hat.com, edumazet@...gle.com
Subject: Re: [PATCH v18 11/20] cxl: Define a driver interface for DPA
allocation
On 9/19/25 20:46, Dave Jiang wrote:
>
> On 9/18/25 2:17 AM, alejandro.lucero-palau@....com wrote:
>> From: Alejandro Lucero <alucerop@....com>
>>
>> Region creation involves finding available DPA (device-physical-address)
>> capacity to map into HPA (host-physical-address) space.
>>
>> In order to support CXL Type2 devices, define an API, cxl_request_dpa(),
>> that tries to allocate the DPA memory the driver requires to operate.The
>> memory requested should not be bigger than the max available HPA obtained
>> previously with cxl_get_hpa_freespace().
>>
>> Based on https://lore.kernel.org/linux-cxl/168592158743.1948938.7622563891193802610.stgit@dwillia2-xfh.jf.intel.com/
>>
>> Signed-off-by: Alejandro Lucero <alucerop@....com>
>> ---
>> drivers/cxl/core/hdm.c | 83 ++++++++++++++++++++++++++++++++++++++++++
>> drivers/cxl/cxl.h | 1 +
>> include/cxl/cxl.h | 5 +++
>> 3 files changed, 89 insertions(+)
>>
>> diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
>> index e9e1d555cec6..d1b1d8ab348a 100644
>> --- a/drivers/cxl/core/hdm.c
>> +++ b/drivers/cxl/core/hdm.c
>> @@ -3,6 +3,7 @@
>> #include <linux/seq_file.h>
>> #include <linux/device.h>
>> #include <linux/delay.h>
>> +#include <cxl/cxl.h>
>>
>> #include "cxlmem.h"
>> #include "core.h"
>> @@ -556,6 +557,13 @@ bool cxl_resource_contains_addr(const struct resource *res, const resource_size_
>> return resource_contains(res, &_addr);
>> }
>>
>> +/**
>> + * cxl_dpa_free - release DPA (Device Physical Address)
>> + *
>> + * @cxled: endpoint decoder linked to the DPA
>> + *
>> + * Returns 0 or error.
>> + */
>> int cxl_dpa_free(struct cxl_endpoint_decoder *cxled)
>> {
>> struct cxl_port *port = cxled_to_port(cxled);
>> @@ -582,6 +590,7 @@ int cxl_dpa_free(struct cxl_endpoint_decoder *cxled)
>> devm_cxl_dpa_release(cxled);
>> return 0;
>> }
>> +EXPORT_SYMBOL_NS_GPL(cxl_dpa_free, "CXL");
>>
>> int cxl_dpa_set_part(struct cxl_endpoint_decoder *cxled,
>> enum cxl_partition_mode mode)
>> @@ -613,6 +622,80 @@ int cxl_dpa_set_part(struct cxl_endpoint_decoder *cxled,
>> return 0;
>> }
>>
>> +static int find_free_decoder(struct device *dev, const void *data)
>> +{
>> + struct cxl_endpoint_decoder *cxled;
>> + struct cxl_port *port;
>> +
>> + if (!is_endpoint_decoder(dev))
>> + return 0;
>> +
>> + cxled = to_cxl_endpoint_decoder(dev);
>> + port = cxled_to_port(cxled);
>> +
>> + return cxled->cxld.id == (port->hdm_end + 1);
>> +}
>> +
>> +static struct cxl_endpoint_decoder *
>> +cxl_find_free_decoder(struct cxl_memdev *cxlmd)
>> +{
>> + struct cxl_port *endpoint = cxlmd->endpoint;
>> + struct device *dev;
>> +
>> + guard(rwsem_read)(&cxl_rwsem.dpa);
>> + dev = device_find_child(&endpoint->dev, NULL,
>> + find_free_decoder);
>> + if (dev)
>> + return to_cxl_endpoint_decoder(dev);
>> +
>> + return NULL;
>> +}
>> +
>> +/**
>> + * cxl_request_dpa - search and reserve DPA given input constraints
>> + * @cxlmd: memdev with an endpoint port with available decoders
>> + * @mode: DPA operation mode (ram vs pmem)
> s/DPA operation mode/CXL partition mode/
>
> I would just leave out ram vs pmem. When something new comes like DPA, you'll have to augment it if you had that.
OK.
>> + * @alloc: dpa size required
>> + *
>> + * Returns a pointer to a cxl_endpoint_decoder struct or an error
> Returns a pointer to a 'struct cxl_endpoint_decoder' on success or an errno encoded pointer on failure.
OK
>> + *
>> + * Given that a region needs to allocate from limited HPA capacity it
>> + * may be the case that a device has more mappable DPA capacity than
>> + * available HPA. The expectation is that @alloc is a driver known
>> + * value based on the device capacity but it could not be available
>> + * due to HPA constraints.
> I'm not understanding what you mean by "but it could not be available due to HPA constraints". Maybe the last sentence needs to be rephrased.
What about "... known avlue based on the device capacity but which could
not be fully available to map due to current HPA constraints"
>> + *
>> + * Returns a pinned cxl_decoder with at least @alloc bytes of capacity
>> + * reserved, or an error pointer. The caller is also expected to own the
>> + * lifetime of the memdev registration associated with the endpoint to
>> + * pin the decoder registered as well.
>> + */
>> +struct cxl_endpoint_decoder *cxl_request_dpa(struct cxl_memdev *cxlmd,
>> + enum cxl_partition_mode mode,
>> + resource_size_t alloc)
>> +{
>> + struct cxl_endpoint_decoder *cxled __free(put_cxled) =
>> + cxl_find_free_decoder(cxlmd);
> Move this down to right before cxled is checked. It's ok the declare variable right before using with cleanup macros.
I'll do so.
Thanks!
> DJ
>
>> + int rc;
>> +
>> + if (!IS_ALIGNED(alloc, SZ_256M))
>> + return ERR_PTR(-EINVAL);
>> +
>> + if (!cxled)
>> + return ERR_PTR(-ENODEV);
>> +
>> + rc = cxl_dpa_set_part(cxled, mode);
>> + if (rc)
>> + return ERR_PTR(rc);
>> +
>> + rc = cxl_dpa_alloc(cxled, alloc);
>> + if (rc)
>> + return ERR_PTR(rc);
>> +
>> + return no_free_ptr(cxled);
>> +}
>> +EXPORT_SYMBOL_NS_GPL(cxl_request_dpa, "CXL");
>> +
>> static int __cxl_dpa_alloc(struct cxl_endpoint_decoder *cxled, u64 size)
>> {
>> struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
>> diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
>> index ab490b5a9457..0020d8e474a6 100644
>> --- a/drivers/cxl/cxl.h
>> +++ b/drivers/cxl/cxl.h
>> @@ -625,6 +625,7 @@ struct cxl_root *find_cxl_root(struct cxl_port *port);
>>
>> DEFINE_FREE(put_cxl_root, struct cxl_root *, if (_T) put_device(&_T->port.dev))
>> DEFINE_FREE(put_cxl_port, struct cxl_port *, if (!IS_ERR_OR_NULL(_T)) put_device(&_T->dev))
>> +DEFINE_FREE(put_cxled, struct cxl_endpoint_decoder *, if (_T) put_device(&_T->cxld.dev))
>> DEFINE_FREE(put_cxl_root_decoder, struct cxl_root_decoder *, if (!IS_ERR_OR_NULL(_T)) put_device(&_T->cxlsd.cxld.dev))
>> DEFINE_FREE(put_cxl_region, struct cxl_region *, if (!IS_ERR_OR_NULL(_T)) put_device(&_T->dev))
>>
>> diff --git a/include/cxl/cxl.h b/include/cxl/cxl.h
>> index 788700fb1eb2..0a607710340d 100644
>> --- a/include/cxl/cxl.h
>> +++ b/include/cxl/cxl.h
>> @@ -7,6 +7,7 @@
>>
>> #include <linux/node.h>
>> #include <linux/ioport.h>
>> +#include <linux/range.h>
>> #include <cxl/mailbox.h>
>>
>> /**
>> @@ -273,4 +274,8 @@ struct cxl_root_decoder *cxl_get_hpa_freespace(struct cxl_memdev *cxlmd,
>> unsigned long flags,
>> resource_size_t *max);
>> void cxl_put_root_decoder(struct cxl_root_decoder *cxlrd);
>> +struct cxl_endpoint_decoder *cxl_request_dpa(struct cxl_memdev *cxlmd,
>> + enum cxl_partition_mode mode,
>> + resource_size_t alloc);
>> +int cxl_dpa_free(struct cxl_endpoint_decoder *cxled);
>> #endif /* __CXL_CXL_H__ */
Powered by blists - more mailing lists