netdev - [PATCH net-next] ixgbe: fix typos and docstring inconsistencies

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250929124427.79219-1-alok.a.tiwari@oracle.com>
Date: Mon, 29 Sep 2025 05:44:01 -0700
From: Alok Tiwari <alok.a.tiwari@...cle.com>
To: anthony.l.nguyen@...el.com, przemyslaw.kitszel@...el.com,
        andrew+netdev@...n.ch, davem@...emloft.net, edumazet@...gle.com,
        kuba@...nel.org, pabeni@...hat.com, netdev@...r.kernel.org,
        horms@...nel.org, intel-wired-lan@...ts.osuosl.org
Cc: alok.a.tiwari@...cle.com
Subject: [PATCH net-next] ixgbe: fix typos and docstring inconsistencies

Corrected function and variable name typos in comments and docstrings:
 ixgbe_write_ee_hostif_X550 -> ixgbe_write_ee_hostif_data_X550
 ixgbe_get_lcd_x550em -> ixgbe_get_lcd_t_x550em
 "Determime" -> "Determine"
 "point to hardware structure" -> "pointer to hardware structure"
 "To turn on the LED" -> "To turn off the LED"

These changes improve readability, consistency.

Signed-off-by: Alok Tiwari <alok.a.tiwari@...cle.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index 650c3e522c3e..76d2fa3ef518 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -1163,7 +1163,7 @@ static int ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw,
 	return status;
 }
 
-/** ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif
+/** ixgbe_write_ee_hostif_data_X550 - Write EEPROM word using hostif
  *  @hw: pointer to hardware structure
  *  @offset: offset of  word in the EEPROM to write
  *  @data: word write to the EEPROM
@@ -2318,7 +2318,7 @@ static int ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
 }
 
 /**
- * ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause
+ * ixgbe_get_lasi_ext_t_x550em - Determine external Base T PHY interrupt cause
  * @hw: pointer to hardware structure
  * @lsc: pointer to boolean flag which indicates whether external Base T
  *	 PHY interrupt is lsc
@@ -2628,7 +2628,7 @@ static int ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up)
 }
 
 /** ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link
- *  @hw: point to hardware structure
+ *  @hw: pointer to hardware structure
  *
  *  Configures the link between the integrated KR PHY and the external X557 PHY
  *  The driver will call this function when it gets a link status change
@@ -2745,7 +2745,7 @@ static int ixgbe_led_off_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
 	if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
 		return -EINVAL;
 
-	/* To turn on the LED, set mode to ON. */
+	/* To turn off the LED, set mode to OFF. */
 	hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
 			     MDIO_MMD_VEND1, &phy_data);
 	phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK;
@@ -2812,7 +2812,7 @@ int ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw *hw, u8 maj, u8 min,
 	return ret_val;
 }
 
-/** ixgbe_get_lcd_x550em - Determine lowest common denominator
+/** ixgbe_get_lcd_t_x550em - Determine lowest common denominator
  *  @hw: pointer to hardware structure
  *  @lcd_speed: pointer to lowest common link speed
  *
-- 
2.50.1