netdev - [PATCH net-next 2/2] net: phy: micrel: fix typos in comments

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20251017193525.1457064-2-alok.a.tiwari@oracle.com>
Date: Fri, 17 Oct 2025 12:35:21 -0700
From: Alok Tiwari <alok.a.tiwari@...cle.com>
To: hkallweit1@...il.com, andrew@...n.ch, kuba@...nel.org,
        andrew+netdev@...n.ch, davem@...emloft.net, edumazet@...gle.com,
        pabeni@...hat.com, horms@...nel.org, linux@...linux.org.uk,
        netdev@...r.kernel.org, alok.a.tiwari@...cle.com
Cc: alok.a.tiwarilinux@...il.com
Subject: [PATCH net-next 2/2] net: phy: micrel: fix typos in comments

Fix several spelling and grammatical errors in comments across
micrel PHY drivers. Corrections include:
- "dealy" -> "delay"
- "autonegotation" -> "autonegotiation"
- "recheas" -> "reaches"
- "one" -> "on"
- "improvenent" -> "improvement"
- "intput" -> "input"

Signed-off-by: Alok Tiwari <alok.a.tiwari@...cle.com>
---
 drivers/net/phy/micrel.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 65994d97c403..5f2c7e5c314f 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -1050,7 +1050,7 @@ static int ksz9021_config_init(struct phy_device *phydev)
 #define TX_CLK_ID			0x1f
 
 /* set tx and tx_clk to "No delay adjustment" to keep 0ns
- * dealy
+ * delay
  */
 #define TX_ND				0x7
 #define TX_CLK_ND			0xf
@@ -1913,7 +1913,7 @@ static int ksz886x_config_aneg(struct phy_device *phydev)
 		return ret;
 
 	if (phydev->autoneg != AUTONEG_ENABLE) {
-		/* When autonegotation is disabled, we need to manually force
+		/* When autonegotiation is disabled, we need to manually force
 		 * the link state. If we don't do this, the PHY will keep
 		 * sending Fast Link Pulses (FLPs) which are part of the
 		 * autonegotiation process. This is not desired when
@@ -3533,7 +3533,7 @@ static void lan8814_ptp_disable_event(struct phy_device *phydev, int event)
 	/* Set target to too far in the future, effectively disabling it */
 	lan8814_ptp_set_target(phydev, event, 0xFFFFFFFF, 0);
 
-	/* And then reload once it recheas the target */
+	/* And then reload once it reaches the target */
 	lanphy_modify_page_reg(phydev, LAN8814_PAGE_COMMON_REGS, LAN8814_PTP_GENERAL_CONFIG,
 			       LAN8814_PTP_GENERAL_CONFIG_RELOAD_ADD_X(event),
 			       LAN8814_PTP_GENERAL_CONFIG_RELOAD_ADD_X(event));
@@ -4403,7 +4403,7 @@ static int lan8814_release_coma_mode(struct phy_device *phydev)
 static void lan8814_clear_2psp_bit(struct phy_device *phydev)
 {
 	/* It was noticed that when traffic is passing through the PHY and the
-	 * cable is removed then the LED was still one even though there is no
+	 * cable is removed then the LED was still on even though there is no
 	 * link
 	 */
 	lanphy_modify_page_reg(phydev, LAN8814_PAGE_PCS_DIGITAL, LAN8814_EEE_STATE,
@@ -4543,7 +4543,7 @@ static int lan8841_config_init(struct phy_device *phydev)
 	phy_write_mmd(phydev, KSZ9131RN_MMD_COMMON_CTRL_REG,
 		      LAN8841_PTP_TX_VERSION, 0xff00);
 
-	/* 100BT Clause 40 improvenent errata */
+	/* 100BT Clause 40 improvement errata */
 	phy_write_mmd(phydev, LAN8841_MMD_ANALOG_REG,
 		      LAN8841_ANALOG_CONTROL_1,
 		      LAN8841_ANALOG_CONTROL_1_PLL_TRIM(0x2));
@@ -5563,7 +5563,7 @@ static int lan8841_ptp_extts_on(struct kszphy_ptp_priv *ptp_priv, int pin,
 	u16 tmp = 0;
 	int ret;
 
-	/* Set GPIO to be intput */
+	/* Set GPIO to be input */
 	ret = phy_set_bits_mmd(phydev, 2, LAN8841_GPIO_EN, BIT(pin));
 	if (ret)
 		return ret;
-- 
2.50.1