netdev - [PATCH net] net: libwx: fix device bus LAN ID

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-ID: <B60A670C1F52CB8E+20251104062321.40059-1-jiawenwu@trustnetic.com>
Date: Tue,  4 Nov 2025 14:23:21 +0800
From: Jiawen Wu <jiawenwu@...stnetic.com>
To: netdev@...r.kernel.org,
	Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Simon Horman <horms@...nel.org>
Cc: Mengyuan Lou <mengyuanlou@...-swift.com>,
	Jiawen Wu <jiawenwu@...stnetic.com>,
	stable@...r.kernel.org
Subject: [PATCH net] net: libwx: fix device bus LAN ID

The device bus LAN ID was obtained from PCI_FUNC(), but when a PF
port is passthrough to a virtual machine, the function number may not
match the actual port index on the device. This could cause the driver
to perform operations such as LAN reset on the wrong port.

Fix this by reading the LAN ID from port status register.

Fixes: a34b3e6ed8fb ("net: txgbe: Store PCI info")
Cc: stable@...r.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@...stnetic.com>
---
 drivers/net/ethernet/wangxun/libwx/wx_hw.c   | 3 ++-
 drivers/net/ethernet/wangxun/libwx/wx_type.h | 4 ++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/wangxun/libwx/wx_hw.c b/drivers/net/ethernet/wangxun/libwx/wx_hw.c
index 814164459707..58b8300e3d2c 100644
--- a/drivers/net/ethernet/wangxun/libwx/wx_hw.c
+++ b/drivers/net/ethernet/wangxun/libwx/wx_hw.c
@@ -2480,7 +2480,8 @@ int wx_sw_init(struct wx *wx)
 	wx->oem_svid = pdev->subsystem_vendor;
 	wx->oem_ssid = pdev->subsystem_device;
 	wx->bus.device = PCI_SLOT(pdev->devfn);
-	wx->bus.func = PCI_FUNC(pdev->devfn);
+	wx->bus.func = FIELD_GET(WX_CFG_PORT_ST_LANID,
+				 rd32(wx, WX_CFG_PORT_ST));
 
 	if (wx->oem_svid == PCI_VENDOR_ID_WANGXUN ||
 	    pdev->is_virtfn) {
diff --git a/drivers/net/ethernet/wangxun/libwx/wx_type.h b/drivers/net/ethernet/wangxun/libwx/wx_type.h
index d0cbcded1dd4..b1a6ef5709a9 100644
--- a/drivers/net/ethernet/wangxun/libwx/wx_type.h
+++ b/drivers/net/ethernet/wangxun/libwx/wx_type.h
@@ -102,6 +102,8 @@
 #define WX_CFG_PORT_CTL_DRV_LOAD     BIT(3)
 #define WX_CFG_PORT_CTL_QINQ         BIT(2)
 #define WX_CFG_PORT_CTL_D_VLAN       BIT(0) /* double vlan*/
+#define WX_CFG_PORT_ST               0x14404
+#define WX_CFG_PORT_ST_LANID         GENMASK(9, 8)
 #define WX_CFG_TAG_TPID(_i)          (0x14430 + ((_i) * 4))
 #define WX_CFG_PORT_CTL_NUM_VT_MASK  GENMASK(13, 12) /* number of TVs */
 
@@ -564,8 +566,6 @@ enum WX_MSCA_CMD_value {
 #define TXD_USE_COUNT(S)     DIV_ROUND_UP((S), WX_MAX_DATA_PER_TXD)
 #define DESC_NEEDED          (MAX_SKB_FRAGS + 4)
 
-#define WX_CFG_PORT_ST               0x14404
-
 /******************* Receive Descriptor bit definitions **********************/
 #define WX_RXD_STAT_DD               BIT(0) /* Done */
 #define WX_RXD_STAT_EOP              BIT(1) /* End of Packet */
-- 
2.48.1