netdev - Re: [PATCH v2 1/2] net: phy: adin: enable configuration of the LP Termination Register

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20251223025737.GA319469@kernel-ep2>
Date: Tue, 23 Dec 2025 08:27:37 +0530
From: Subbaraya Sundeep <sbhatta@...vell.com>
To: Osose Itua <osose.itua@...oirfairelinux.com>
CC: <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <michael.hennerich@...log.com>,
        <jerome.oufella@...oirfairelinux.com>
Subject: Re: [PATCH v2 1/2] net: phy: adin: enable configuration of the LP
 Termination Register

Hi,

On 2025-12-23 at 03:51:04, Osose Itua (osose.itua@...oirfairelinux.com) wrote:
> The ADIN1200/ADIN1300 provide a control bit that selects between normal
> receive termination and the lowest common mode impedance for 100BASE-TX
> operation. This behavior is controlled through the Low Power Termination
> register (B_100_ZPTM_EN_DIMRX).
> 
> Bit 0 of this register enables normal termination when set (this is the
> default), and selects the lowest common mode impedance when cleared.
> 
> Signed-off-by: Osose Itua <osose.itua@...oirfairelinux.com>
> ---
>  drivers/net/phy/adin.c | 34 ++++++++++++++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
> 
> diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
> index 7fa713ca8d45..e8b778cb191d 100644
> --- a/drivers/net/phy/adin.c
> +++ b/drivers/net/phy/adin.c
> @@ -4,6 +4,7 @@
>   *
>   * Copyright 2019 Analog Devices Inc.
>   */
> +#include <cerrno>
>  #include <linux/kernel.h>
>  #include <linux/bitfield.h>
>  #include <linux/delay.h>
> @@ -89,6 +90,9 @@
>  #define ADIN1300_CLOCK_STOP_REG			0x9400
>  #define ADIN1300_LPI_WAKE_ERR_CNT_REG		0xa000
>  
> +#define ADIN1300_B_100_ZPTM_DIMRX		0xB685
> +#define ADIN1300_B_100_ZPTM_EN_DIMRX		BIT(0)
> +
>  #define ADIN1300_CDIAG_RUN			0xba1b
>  #define   ADIN1300_CDIAG_RUN_EN			BIT(0)
>  
> @@ -522,6 +526,32 @@ static int adin_config_clk_out(struct phy_device *phydev)
>  			      ADIN1300_GE_CLK_CFG_MASK, sel);
>  }
>  
> +static int adin_config_zptm100(struct phy_device *phydev)
> +{
> +	struct device *dev = &phydev->mdio.dev;
> +	int reg;
> +	int rc;
> +
> +	if (!(device_property_read_bool(dev, "adi,low-cmode-impedance")))
> +		return 0;
> +
> +	/* set to 0 to configure for lowest common-mode impedance */
> +	rc = phy_write_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_B_100_ZPTM_DIMRX, 0x0);

This clears full register instead of just bit 0. Is that intended?

> +	if (rc < 0)
> +		return rc;
> +
> +	reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_B_100_ZPTM_DIMRX);
> +	if (reg < 0)
> +		return reg;
> +
> +	if (!(reg & ADIN1300_B_100_ZPTM_EN_DIMRX)) {

>From commit description, check should be if (reg & ADIN1300_B_100_ZPTM_EN_DIMRX)
AI review also caught this:
https://netdev-ai.bots.linux.dev/ai-review.html?id=05b38bb2-1244-46fc-a4d9-311ca8c825ee#patch-0

Fix the build errors reported at:
https://patchwork.kernel.org/project/netdevbpf/patch/20251222222210.3651577-2-osose.itua@savoirfairelinux.com/

Also net-next is closed till Jan 2. Please post v3 after that.

Thanks,
Sundeep
> +		phydev_err(phydev, "Failed to set lowest common-mode impedance.\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
>  static int adin_config_init(struct phy_device *phydev)
>  {
>  	int rc;
> @@ -548,6 +578,10 @@ static int adin_config_init(struct phy_device *phydev)
>  	if (rc < 0)
>  		return rc;
>  
> +	rc = adin_config_zptm100(phydev);
> +	if (rc < 0)
> +		return rc;
> +
>  	phydev_dbg(phydev, "PHY is using mode '%s'\n",
>  		   phy_modes(phydev->interface));
>