[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20260204-icssg-prueth-workqueue-v1-0-9a892f4b293d@gmail.com>
Date: Wed, 04 Feb 2026 10:41:09 +0800
From: Kevin Hao <haokexin@...il.com>
To: netdev@...r.kernel.org
Cc: MD Danish Anwar <danishanwar@...com>, Roger Quadros <rogerq@...nel.org>,
Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Meghana Malladi <m-malladi@...com>, Jacob Keller <jacob.e.keller@...el.com>,
Vadim Fedorenko <vadim.fedorenko@...ux.dev>,
Himanshu Mittal <h-mittal1@...com>, Simon Horman <horms@...nel.org>,
Byungchul Park <byungchul@...com>,
Markus Elfring <elfring@...rs.sourceforge.net>,
Kevin Hao <haokexin@...il.com>
Subject: [PATCH net-next 0/2] net: ti: icssg: Remove dedicated workqueue
for ndo_set_rx_mode callback
While addressing an issue in the cpsw driver, I based my fix on the
implementation of the emac_ndo_set_rx_mode() function in icssg. During review,
Jakub pointed out that the dedicated workqueue for the ndo_set_rx_mode
callback might be unnecessary. I subsequently used the system workqueue for
this purpose in the cpsw driver, and it performed as expected. Therefore,
I believe the same approach can be applied to the icssg driver. These two
patches aim to remove this dedicated workqueue for icssg drivers.
Please note: I do not have access to a board that supports the CSSG PRU
Ethernet controller, so this change has only been build-tested.
---
Cc: MD Danish Anwar <danishanwar@...com>
Cc: Roger Quadros <rogerq@...nel.org>
Cc: Andrew Lunn <andrew+netdev@...n.ch>
Cc: "David S. Miller" <davem@...emloft.net>
Cc: Eric Dumazet <edumazet@...gle.com>
Cc: Jakub Kicinski <kuba@...nel.org>
Cc: Paolo Abeni <pabeni@...hat.com>
Cc: Meghana Malladi <m-malladi@...com>
Cc: Jacob Keller <jacob.e.keller@...el.com>
Cc: Vadim Fedorenko <vadim.fedorenko@...ux.dev>
Cc: Himanshu Mittal <h-mittal1@...com>
Cc: Simon Horman <horms@...nel.org>
Cc: Byungchul Park <byungchul@...com>
Cc: Markus Elfring <elfring@...rs.sourceforge.net>
---
Kevin Hao (2):
net: ti: icssg-prueth-sr1: Remove unused workqueue
net: ti: icssg-prueth: Use system default workqueue in ndo_set_rx_mode callback
drivers/net/ethernet/ti/icssg/icssg_common.c | 1 -
drivers/net/ethernet/ti/icssg/icssg_prueth.c | 13 ++++---------
drivers/net/ethernet/ti/icssg/icssg_prueth.h | 1 -
drivers/net/ethernet/ti/icssg/icssg_prueth_sr1.c | 9 +--------
4 files changed, 5 insertions(+), 19 deletions(-)
---
base-commit: 5c009020744fe129e4728e71c44a6c7816c9105e
change-id: 20260203-icssg-prueth-workqueue-f460eba72132
Best regards,
--
Kevin Hao <haokexin@...il.com>
Powered by blists - more mailing lists