| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20060928113043.2dd47049.kristen.c.accardi@intel.com>
Date: Thu, 28 Sep 2006 11:30:43 -0700
From: Kristen Carlson Accardi <kristen.c.accardi@...el.com>
To: linux-ide@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, jgarzik@...ox.com,
rdunlap@...otime.net,
Kristen Carlson Accardi <kristen.c.accardi@...el.com>
Subject: [patch 2/2] libata: _SDD support
_SDD (Set Device Data) is an ACPI method that is used to tell the
firmware what the identify data is of the device that is attached to
the port. It is an optional method, and it's ok for it to be missing.
Because of this, we always return success from the routine that calls
this method, even if the execution fails.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@...el.com>
---
drivers/ata/libata-acpi.c | 96 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/ata/libata-core.c | 8 +++
drivers/ata/libata.h | 5 ++
3 files changed, 109 insertions(+)
--- 2.6-mm.orig/drivers/ata/libata-acpi.c
+++ 2.6-mm/drivers/ata/libata-acpi.c
@@ -600,3 +600,99 @@ int ata_acpi_exec_tfs(struct ata_port *a
return ret;
}
+/**
+ * ata_acpi_push_id - send Identify data to drive
+ * @ap: the ata_port for the drive
+ * @ix: drive index
+ *
+ * _SDD ACPI object: for SATA mode only
+ * Must be after Identify (Packet) Device -- uses its data
+ * ATM this function never returns a failure. It is an optional
+ * method and if it fails for whatever reason, we should still
+ * just keep going.
+ */
+int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
+{
+ acpi_handle handle;
+ acpi_integer pcidevfn;
+ int err;
+ struct device *dev = ap->host->dev;
+ struct ata_device *atadev = &ap->device[ix];
+ u32 dev_adr;
+ acpi_status status;
+ struct acpi_object_list input;
+ union acpi_object in_params[1];
+
+ if (noacpi)
+ return 0;
+
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG,
+ "%s: ap->id: %d, ix = %d, port#: %d\n",
+ __FUNCTION__, ap->id, ix, ap->port_no);
+
+ /* Don't continue if not a SATA device. */
+ if (!(ap->cbl == ATA_CBL_SATA)) {
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG,
+ "%s: Not a SATA device\n", __FUNCTION__);
+ goto out;
+ }
+
+ /* Don't continue if device has no _ADR method.
+ * _SDD is intended for known motherboard devices. */
+ err = sata_get_dev_handle(dev, &handle, &pcidevfn);
+ if (err < 0) {
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG,
+ "%s: sata_get_dev_handle failed (%d\n",
+ __FUNCTION__, err);
+ goto out;
+ }
+
+ /* Get this drive's _ADR info, if not already known */
+ if (!atadev->obj_handle) {
+ dev_adr = SATA_ADR_RSVD;
+ err = get_sata_adr(dev, handle, pcidevfn, ix, ap, atadev,
+ &dev_adr);
+ if (err < 0 || dev_adr == SATA_ADR_RSVD ||
+ !atadev->obj_handle) {
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG,
+ "%s: get_sata_adr failed: "
+ "err=%d, dev_adr=%u, obj_handle=0x%p\n",
+ __FUNCTION__, err, dev_adr,
+ atadev->obj_handle);
+ goto out;
+ }
+ }
+
+ /* Give the drive Identify data to the drive via the _SDD method */
+ /* _SDD: set up input parameters */
+ input.count = 1;
+ input.pointer = in_params;
+ in_params[0].type = ACPI_TYPE_BUFFER;
+ in_params[0].buffer.length = sizeof(atadev->id[0] * ATA_ID_WORDS);
+ in_params[0].buffer.pointer = (u8 *)atadev->id;
+ /* Output buffer: _SDD has no output */
+
+ /* It's OK for _SDD to be missing too. */
+ swap_buf_le16(atadev->id, ATA_ID_WORDS);
+ status = acpi_evaluate_object(atadev->obj_handle, "_SDD", &input, NULL);
+ swap_buf_le16(atadev->id, ATA_ID_WORDS);
+
+ err = ACPI_FAILURE(status) ? -EIO : 0;
+ if (err < 0) {
+ if (ata_msg_probe(ap))
+ ata_dev_printk(atadev, KERN_DEBUG,
+ "ata%u(%u): %s _SDD error: status = 0x%x\n",
+ ap->id, ap->device->devno,
+ __FUNCTION__, status);
+ }
+
+ /* always return success */
+out:
+ return 0;
+}
+
+
--- 2.6-mm.orig/drivers/ata/libata-core.c
+++ 2.6-mm/drivers/ata/libata-core.c
@@ -1556,6 +1556,14 @@ int ata_dev_configure(struct ata_device
if (ap->ops->dev_config)
ap->ops->dev_config(ap, dev);
+ /* set _SDD */
+ rc = ata_acpi_push_id(ap, dev->devno);
+ if (rc) {
+ ata_dev_printk(dev, KERN_WARNING, "failed to set _SDD(%d)\n",
+ rc);
+ goto err_out_nosup;
+ }
+
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n",
__FUNCTION__, ata_chk_status(ap));
--- 2.6-mm.orig/drivers/ata/libata.h
+++ 2.6-mm/drivers/ata/libata.h
@@ -78,11 +78,16 @@ extern struct ata_probe_ent *ata_probe_e
/* libata-acpi.c */
#ifdef CONFIG_SATA_ACPI
extern int ata_acpi_exec_tfs(struct ata_port *ap);
+extern int ata_acpi_push_id(struct ata_port *ap, unsigned int ix);
#else
static inline int ata_acpi_exec_tfs(struct ata_port *ap)
{
return 0;
}
+static inline int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
+{
+ return 0;
+}
#endif
/* libata-scsi.c */
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists