| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070511064954.GE15955@bakeyournoodle.com>
Date: Fri, 11 May 2007 16:49:54 +1000
From: tony@...eyournoodle.com (Tony Breeds)
To: Linux Kernel ML <linux-kernel@...r.kernel.org>
Cc: Tejun Heo <htejun@...il.com>,
Akira Iguchi <akira2.iguchi@...hiba.co.jp>,
Jeff Garzik <jgarzik@...ox.com>, linux-ide@...r.kernel.org,
cbe-oss-dev@...abs.org
Subject: [PATCH/RFC] Fix build failure for drivers/ata/pata_scc.c
The commit d4b2bab4f26345ea1803feb23ea92fbe3f6b77bc added deadline support to
prereset and reset methods to libbata the pata_scc driver wasn't converted.
This patch is a naive attempt to bring this driver up to scratch.
Build failures are:
drivers/ata/pata_scc.c: In function 'scc_pata_prereset':
drivers/ata/pata_scc.c:870: error: too few arguments to function 'ata_std_prereset'
drivers/ata/pata_scc.c: In function 'scc_error_handler':
drivers/ata/pata_scc.c:916: warning: passing argument 2 of 'ata_bmdma_drive_eh' from incompatible pointer type
drivers/ata/pata_scc.c:916: warning: passing argument 3 of 'ata_bmdma_drive_eh' from incompatible pointer type
drivers/ata/pata_scc.c: In function 'scc_pata_prereset':
drivers/ata/pata_scc.c:871: warning: control reaches end of non-void function
On a releated note scc_bus_post_reset() is (AFACT) identical to
ata_bus_post_reset(), would a patch to make ata_bus_post_reset() assesable to
drivers be accepted?
Signed-off-by: Tony Breeds <tony@...eyournoodle.com>
CC: Tejun Heo <htejun@...il.com>
CC: Akira Iguchi <akira2.iguchi@...hiba.co.jp>
CC: Jeff Garzik <jgarzik@...ox.com>
CC: linux-ide@...r.kernel.org
---
drivers/ata/pata_scc.c | 48 ++++++++++++++++++++++++-----------------
1 file changed, 29 insertions(+), 19 deletions(-)
Index: working/drivers/ata/pata_scc.c
===================================================================
--- working.orig/drivers/ata/pata_scc.c
+++ working/drivers/ata/pata_scc.c
@@ -489,23 +489,26 @@ static unsigned int scc_devchk (struct a
* Note: Original code is ata_bus_post_reset().
*/
-static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask)
+static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask,
+ unsigned long deadline)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int dev0 = devmask & (1 << 0);
unsigned int dev1 = devmask & (1 << 1);
- unsigned long timeout;
+ int rc;
/* if device 0 was found in ata_devchk, wait for its
* BSY bit to clear
*/
- if (dev0)
- ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+ if (dev0) {
+ rc = ata_wait_ready(ap, deadline);
+ if (rc && rc != -ENODEV)
+ return rc;
+ }
/* if device 1 was found in ata_devchk, wait for
* register access, then wait for BSY to clear
*/
- timeout = jiffies + ATA_TMOUT_BOOT;
while (dev1) {
u8 nsect, lbal;
@@ -514,14 +517,15 @@ static void scc_bus_post_reset (struct a
lbal = in_be32(ioaddr->lbal_addr);
if ((nsect == 1) && (lbal == 1))
break;
- if (time_after(jiffies, timeout)) {
- dev1 = 0;
- break;
- }
+ if (time_after(jiffies, deadline))
+ return -EBUSY;
msleep(50); /* give drive a breather */
}
- if (dev1)
- ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+ if (dev1) {
+ rc = ata_wait_ready(ap, deadline);
+ if (rc && rc != -ENODEV)
+ return rc;
+ }
/* is all this really necessary? */
ap->ops->dev_select(ap, 0);
@@ -529,6 +533,8 @@ static void scc_bus_post_reset (struct a
ap->ops->dev_select(ap, 1);
if (dev0)
ap->ops->dev_select(ap, 0);
+
+ return 0;
}
/**
@@ -537,8 +543,8 @@ static void scc_bus_post_reset (struct a
* Note: Original code is ata_bus_softreset().
*/
-static unsigned int scc_bus_softreset (struct ata_port *ap,
- unsigned int devmask)
+static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
+ unsigned long deadline)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
@@ -570,7 +576,7 @@ static unsigned int scc_bus_softreset (s
if (scc_check_status(ap) == 0xFF)
return 0;
- scc_bus_post_reset(ap, devmask);
+ scc_bus_post_reset(ap, devmask, deadline);
return 0;
}
@@ -579,11 +585,13 @@ static unsigned int scc_bus_softreset (s
* scc_std_softreset - reset host port via ATA SRST
* @ap: port to reset
* @classes: resulting classes of attached devices
+ * @deadline: deadline jiffies for the operation
*
* Note: Original code is ata_std_softreset().
*/
-static int scc_std_softreset (struct ata_port *ap, unsigned int *classes)
+static int scc_std_softreset (struct ata_port *ap, unsigned int *classes,
+ unsigned long deadline)
{
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
unsigned int devmask = 0, err_mask;
@@ -607,7 +615,7 @@ static int scc_std_softreset (struct ata
/* issue bus reset */
DPRINTK("about to softreset, devmask=%x\n", devmask);
- err_mask = scc_bus_softreset(ap, devmask);
+ err_mask = scc_bus_softreset(ap, devmask, deadline);
if (err_mask) {
ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n",
err_mask);
@@ -676,10 +684,11 @@ static void scc_bmdma_stop (struct ata_q
if (reg & INTSTS_BMSINT) {
unsigned int classes;
+ unsigned long deadline = jiffies + ATA_TMOUT_BOOT;
printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
/* TBD: SW reset */
- scc_std_softreset(ap, &classes);
+ scc_std_softreset(ap, &classes, deadline);
continue;
}
@@ -862,12 +871,13 @@ static void scc_bmdma_freeze (struct ata
/**
* scc_pata_prereset - prepare for reset
* @ap: ATA port to be reset
+ * @deadline: deadline jiffies for the operation
*/
-static int scc_pata_prereset (struct ata_port *ap)
+static int scc_pata_prereset (struct ata_port *ap, unsigned long deadline)
{
ap->cbl = ATA_CBL_PATA80;
- return ata_std_prereset(ap);
+ return ata_std_prereset(ap, deadline);
}
/**
Yours Tony
linux.conf.au http://linux.conf.au/ || http://lca2008.linux.org.au/
Jan 28 - Feb 02 2008 The Australian Linux Technical Conference!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists