| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 12 Oct 2009 11:27:13 +0200
From: Ingo Molnar <mingo@...e.hu>
To: Linus Torvalds <torvalds@...ux-foundation.org>,
Greg KH <gregkh@...e.de>, Alan Cox <alan@...rguk.ukuu.org.uk>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [crash] NULL pointer dereference at IP: [<ffffffff812e9ccb>]
uart_close+0x2a/0x1e4
i also have a crash with vanilla -rc4, test on this commit:
d93a8f8: Revert "USB: Work around BIOS bugs by quiescing USB controllers earlier"
crashlog pasted below - config attached.
Ingo
Linux version 2.6.32-rc4 (mingo@...ebaran) (gcc version 4.4.2 20091002 (prerelease) (GCC) ) #1 Mon Oct 12 11:22:47 CEST 2009
Command line: root=/dev/sda3 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty 3 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS)
BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
bootconsole [earlyser0] enabled
debug: ignoring loglevel setting.
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7ffa0 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007ffa0000 (usable)
modified: 000000007ffa0000 - 000000007ffae000 (ACPI data)
modified: 000000007ffae000 - 000000007ffe0000 (ACPI NVS)
modified: 000000007ffe0000 - 0000000080000000 (reserved)
modified: 00000000ffb80000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007ffa0000
0000000000 - 007ffa0000 page 4k
kernel direct mapping tables up to 7ffa0000 @ 100000-503000
ACPI: RSDP 00000000000facd0 00024 (v02 ACPIAM)
ACPI: XSDT 000000007ffa0100 00044 (v01 A M I OEMXSDT 10000630 MSFT 00000097)
ACPI: FACP 000000007ffa0290 000F4 (v03 A M I OEMFACP 10000630 MSFT 00000097)
ACPI: DSDT 000000007ffa0410 08318 (v01 A0227 A0227000 00000000 INTL 02002026)
ACPI: FACS 000000007ffae000 00040
ACPI: APIC 000000007ffa0390 00080 (v01 A M I OEMAPIC 10000630 MSFT 00000097)
ACPI: OEMB 000000007ffae040 00066 (v01 A M I AMI_OEM 10000630 MSFT 00000097)
ACPI: MCFG 000000007ffa8730 0003C (v01 A M I OEMMCFG 10000630 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
(6 early reservations) ==> bootmem [0000000000 - 007ffa0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002881080] TEXT DATA BSS ==> [0001000000 - 0002881080]
#3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#4 [0002882000 - 000288227c] BRK ==> [0002882000 - 000288227c]
#5 [0000100000 - 0000501000] PGTABLE ==> [0000100000 - 0000501000]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002e00000-ffff8800049fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ffa0
On node 0 totalpages: 524079
DMA zone: 56 pages used for memmap
DMA zone: 1124 pages reserved
DMA zone: 2803 pages, LIFO batch:0
DMA32 zone: 7111 pages used for memmap
DMA32 zone: 512985 pages, LIFO batch:31
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
mapped APIC to ffffffffff5fc000 (fee00000)
mapped IOAPIC to ffffffffff5fb000 (fec00000)
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:7fb80000)
Booting paravirtualized kernel on bare hardware
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515788
Kernel command line: root=/dev/sda3 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty 3 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled
kernel profiling enabled (shift: 0)
debug: sysrq always enabled.
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Memory: 2034728k/2096768k available (7661k kernel code, 452k absent, 61180k reserved, 6599k data, 812k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is enabled.
NR_IRQS:288
Console: colour VGA+ 80x25
console [tty0] enabled, bootconsole disabled
console [ttyS0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 6335 kB
per task-struct memory footprint: 2688 bytes
------------------------
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-B-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed|
A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed|
A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed|
double unlock: ok | ok | ok | ok | ok | ok |
initialize held: ok | ok | ok | ok | ok | ok |
bad unlock order: ok | ok | ok | ok | ok | ok |
--------------------------------------------------------------------------
recursive read-lock: | ok | |failed|
recursive read-lock #2: | ok | |failed|
mixed read-write-lock: |failed| |failed|
mixed write-read-lock: |failed| |failed|
--------------------------------------------------------------------------
hard-irqs-on + irq-safe-A/12:failed|failed| ok |
soft-irqs-on + irq-safe-A/12:failed|failed| ok |
hard-irqs-on + irq-safe-A/21:failed|failed| ok |
soft-irqs-on + irq-safe-A/21:failed|failed| ok |
sirq-safe-A => hirqs-on/12:failed|failed| ok |
sirq-safe-A => hirqs-on/21:failed|failed| ok |
hard-safe-A + irqs-on/12:failed|failed| ok |
soft-safe-A + irqs-on/12:failed|failed| ok |
hard-safe-A + irqs-on/21:failed|failed| ok |
soft-safe-A + irqs-on/21:failed|failed| ok |
hard-safe-A + unsafe-B #1/123:failed|failed| ok |
soft-safe-A + unsafe-B #1/123:failed|failed| ok |
hard-safe-A + unsafe-B #1/132:failed|failed| ok |
soft-safe-A + unsafe-B #1/132:failed|failed| ok |
hard-safe-A + unsafe-B #1/213:failed|failed| ok |
soft-safe-A + unsafe-B #1/213:failed|failed| ok |
hard-safe-A + unsafe-B #1/231:failed|failed| ok |
soft-safe-A + unsafe-B #1/231:failed|failed| ok |
hard-safe-A + unsafe-B #1/312:failed|failed| ok |
soft-safe-A + unsafe-B #1/312:failed|failed| ok |
hard-safe-A + unsafe-B #1/321:failed|failed| ok |
soft-safe-A + unsafe-B #1/321:failed|failed| ok |
hard-safe-A + unsafe-B #2/123:failed|failed| ok |
soft-safe-A + unsafe-B #2/123:failed|failed| ok |
hard-safe-A + unsafe-B #2/132:failed|failed| ok |
soft-safe-A + unsafe-B #2/132:failed|failed| ok |
hard-safe-A + unsafe-B #2/213:failed|failed| ok |
soft-safe-A + unsafe-B #2/213:failed|failed| ok |
hard-safe-A + unsafe-B #2/231:failed|failed| ok |
soft-safe-A + unsafe-B #2/231:failed|failed| ok |
hard-safe-A + unsafe-B #2/312:failed|failed| ok |
soft-safe-A + unsafe-B #2/312:failed|failed| ok |
hard-safe-A + unsafe-B #2/321:failed|failed| ok |
soft-safe-A + unsafe-B #2/321:failed|failed| ok |
hard-irq lock-inversion/123:failed|failed| ok |
soft-irq lock-inversion/123:failed|failed| ok |
hard-irq lock-inversion/132:failed|failed| ok |
soft-irq lock-inversion/132:failed|failed| ok |
hard-irq lock-inversion/213:failed|failed| ok |
soft-irq lock-inversion/213:failed|failed| ok |
hard-irq lock-inversion/231:failed|failed| ok |
soft-irq lock-inversion/231:failed|failed| ok |
hard-irq lock-inversion/312:failed|failed| ok |
soft-irq lock-inversion/312:failed|failed| ok |
hard-irq lock-inversion/321:failed|failed| ok |
soft-irq lock-inversion/321:failed|failed| ok |
hard-irq read-recursion/123: ok |
soft-irq read-recursion/123: ok |
hard-irq read-recursion/132: ok |
soft-irq read-recursion/132: ok |
hard-irq read-recursion/213: ok |
soft-irq read-recursion/213: ok |
hard-irq read-recursion/231: ok |
soft-irq read-recursion/231: ok |
hard-irq read-recursion/312: ok |
soft-irq read-recursion/312: ok |
hard-irq read-recursion/321: ok |
soft-irq read-recursion/321: ok |
--------------------------------------------------------
133 out of 218 testcases failed, as expected. |
----------------------------------------------------
allocated 20971520 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 3456.952 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6916.98 BogoMIPS (lpj=11523173)
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: no PMU driver, software events only.
CPU: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 32532 entries in 128 pages
calling spawn_ksoftirqd+0x0/0x39 @ 1
initcall spawn_ksoftirqd+0x0/0x39 returned 0 after 0 usecs
calling spawn_softlockup_task+0x0/0x55 @ 1
initcall spawn_softlockup_task+0x0/0x55 returned 0 after 0 usecs
calling relay_init+0x0/0x8 @ 1
initcall relay_init+0x0/0x8 returned 0 after 0 usecs
calling tracer_alloc_buffers+0x0/0x1a1 @ 1
initcall tracer_alloc_buffers+0x0/0x1a1 returned 0 after 0 usecs
calling init_trace_printk+0x0/0x12 @ 1
initcall init_trace_printk+0x0/0x12 returned 0 after 0 usecs
calling trace_workqueue_early_init+0x0/0xea @ 1
initcall trace_workqueue_early_init+0x0/0xea returned 0 after 0 usecs
Setting APIC routing to flat
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
init IO_APIC IRQs
2-0 (apicid-pin) not connected
IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0)
IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 1440239
..... delta 1440239
..... mult: 61861827
..... calibration result: 768127
..... CPU clock speed is 3456.3059 MHz.
..... host bus clock speed is 230.1537 MHz.
... verify APIC timer
... jiffies delta = 30
... jiffies result ok
PM: Adding info for No Bus:platform
khelper used greatest stack depth: 5808 bytes left
calling init_mmap_min_addr+0x0/0x16 @ 1
initcall init_mmap_min_addr+0x0/0x16 returned 0 after 0 usecs
calling net_ns_init+0x0/0x153 @ 1
initcall net_ns_init+0x0/0x153 returned 0 after 0 usecs
calling e820_mark_nvs_memory+0x0/0x40 @ 1
initcall e820_mark_nvs_memory+0x0/0x40 returned 0 after 0 usecs
calling pci_reboot_init+0x0/0x14 @ 1
initcall pci_reboot_init+0x0/0x14 returned 0 after 0 usecs
calling init_lapic_sysfs+0x0/0x2d @ 1
initcall init_lapic_sysfs+0x0/0x2d returned 0 after 0 usecs
calling ksysfs_init+0x0/0xc0 @ 1
initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs
calling async_init+0x0/0x60 @ 1
initcall async_init+0x0/0x60 returned 0 after 0 usecs
calling init_jiffies_clocksource+0x0/0x12 @ 1
initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 usecs
calling pm_init+0x0/0x34 @ 1
initcall pm_init+0x0/0x34 returned 0 after 0 usecs
calling pm_disk_init+0x0/0x19 @ 1
initcall pm_disk_init+0x0/0x19 returned 0 after 0 usecs
calling swsusp_header_init+0x0/0x31 @ 1
initcall swsusp_header_init+0x0/0x31 returned 0 after 0 usecs
calling init_zero_pfn+0x0/0x35 @ 1
initcall init_zero_pfn+0x0/0x35 returned 0 after 0 usecs
calling filelock_init+0x0/0x2e @ 1
initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
calling init_script_binfmt+0x0/0x14 @ 1
initcall init_script_binfmt+0x0/0x14 returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0x14 @ 1
initcall init_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
calling init_compat_elf_binfmt+0x0/0x14 @ 1
initcall init_compat_elf_binfmt+0x0/0x14 returned 0 after 0 usecs
calling debugfs_init+0x0/0x5c @ 1
initcall debugfs_init+0x0/0x5c returned 0 after 0 usecs
calling securityfs_init+0x0/0x53 @ 1
initcall securityfs_init+0x0/0x53 returned 0 after 0 usecs
calling random32_init+0x0/0x6d @ 1
initcall random32_init+0x0/0x6d returned 0 after 0 usecs
calling gnttab_init+0x0/0x196 @ 1
initcall gnttab_init+0x0/0x196 returned -19 after 0 usecs
calling regulator_init+0x0/0x2e @ 1
regulator: core version 0.5
initcall regulator_init+0x0/0x2e returned 0 after 3255 usecs
calling early_resume_init+0x0/0x18 @ 1
Time: 9:22:18 Date: 10/12/09
initcall early_resume_init+0x0/0x18 returned 0 after 3255 usecs
calling cpuidle_init+0x0/0x20 @ 1
initcall cpuidle_init+0x0/0x20 returned 0 after 0 usecs
calling virtio_init+0x0/0x2b @ 1
initcall virtio_init+0x0/0x2b returned 0 after 0 usecs
calling sock_init+0x0/0x59 @ 1
initcall sock_init+0x0/0x59 returned 0 after 0 usecs
calling netpoll_init+0x0/0x41 @ 1
initcall netpoll_init+0x0/0x41 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x19e @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x19e returned 0 after 3255 usecs
calling bdi_class_init+0x0/0x41 @ 1
initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs
calling kobject_uevent_init+0x0/0x54 @ 1
initcall kobject_uevent_init+0x0/0x54 returned 0 after 0 usecs
calling pcibus_class_init+0x0/0x19 @ 1
initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
calling pci_driver_init+0x0/0x12 @ 1
initcall pci_driver_init+0x0/0x12 returned 0 after 3255 usecs
calling backlight_class_init+0x0/0x5d @ 1
initcall backlight_class_init+0x0/0x5d returned 0 after 3255 usecs
calling xenbus_probe_init+0x0/0x107 @ 1
initcall xenbus_probe_init+0x0/0x107 returned -19 after 0 usecs
calling tty_class_init+0x0/0x38 @ 1
initcall tty_class_init+0x0/0x38 returned 0 after 0 usecs
calling vtconsole_class_init+0x0/0xc2 @ 1
PM: Adding info for No Bus:vtcon0
initcall vtconsole_class_init+0x0/0xc2 returned 0 after 3255 usecs
calling spi_init+0x0/0xd7 @ 1
initcall spi_init+0x0/0xd7 returned 0 after 0 usecs
calling amd_postcore_init+0x0/0x3c @ 1
initcall amd_postcore_init+0x0/0x3c returned 0 after 0 usecs
calling arch_kdebugfs_init+0x0/0x2d @ 1
initcall arch_kdebugfs_init+0x0/0x2d returned 0 after 0 usecs
calling ffh_cstate_init+0x0/0x7e @ 1
initcall ffh_cstate_init+0x0/0x7e returned 0 after 0 usecs
calling acpi_pci_init+0x0/0x57 @ 1
ACPI: bus type pci registered
initcall acpi_pci_init+0x0/0x57 returned 0 after 3255 usecs
calling dmi_id_init+0x0/0xfb @ 1
PM: Adding info for No Bus:id
initcall dmi_id_init+0x0/0xfb returned 0 after 3255 usecs
calling pci_arch_init+0x0/0x57 @ 1
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x57 returned 0 after 6510 usecs
calling topology_init+0x0/0x16 @ 1
initcall topology_init+0x0/0x16 returned 0 after 0 usecs
calling param_sysfs_init+0x0/0xe4 @ 1
khelper used greatest stack depth: 5464 bytes left
initcall param_sysfs_init+0x0/0xe4 returned 0 after 136718 usecs
calling pm_sysrq_init+0x0/0x1e @ 1
initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 usecs
calling audit_watch_init+0x0/0x2f @ 1
initcall audit_watch_init+0x0/0x2f returned 0 after 0 usecs
calling init_slow_work+0x0/0x1b @ 1
initcall init_slow_work+0x0/0x1b returned 0 after 0 usecs
calling default_bdi_init+0x0/0xc6 @ 1
PM: Adding info for No Bus:default
initcall default_bdi_init+0x0/0xc6 returned 0 after 3255 usecs
calling init_bio+0x0/0x128 @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0x128 returned 0 after 3255 usecs
calling fsnotify_init+0x0/0x12 @ 1
initcall fsnotify_init+0x0/0x12 returned 0 after 0 usecs
calling fsnotify_notification_init+0x0/0x68 @ 1
initcall fsnotify_notification_init+0x0/0x68 returned 0 after 0 usecs
calling cryptomgr_init+0x0/0x12 @ 1
initcall cryptomgr_init+0x0/0x12 returned 0 after 0 usecs
calling blk_settings_init+0x0/0x2a @ 1
initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x2a @ 1
initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
calling blk_softirq_init+0x0/0x2e @ 1
initcall blk_softirq_init+0x0/0x2e returned 0 after 0 usecs
calling blk_iopoll_setup+0x0/0x2e @ 1
initcall blk_iopoll_setup+0x0/0x2e returned 0 after 0 usecs
calling genhd_device_init+0x0/0x66 @ 1
initcall genhd_device_init+0x0/0x66 returned 0 after 0 usecs
calling blk_dev_integrity_init+0x0/0x2a @ 1
initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 usecs
calling gpiolib_debugfs_init+0x0/0x24 @ 1
initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs
calling pci_slot_init+0x0/0x4b @ 1
initcall pci_slot_init+0x0/0x4b returned 0 after 0 usecs
calling acpi_init+0x0/0x134 @ 1
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: Using MMCONFIG at f0000000 - f3ffffff
PM: Adding info for acpi:LNXSYSTM:00
PM: Adding info for acpi:LNXCPU:00
PM: Adding info for acpi:LNXCPU:01
PM: Adding info for acpi:LNXCPU:02
PM: Adding info for acpi:LNXCPU:03
PM: Adding info for acpi:LNXSYBUS:00
PM: Adding info for acpi:PNP0A08:00
PM: Adding info for acpi:PNP0C01:00
PM: Adding info for acpi:device:00
PM: Adding info for acpi:device:01
PM: Adding info for acpi:device:02
PM: Adding info for acpi:device:03
PM: Adding info for acpi:device:04
PM: Adding info for acpi:device:05
PM: Adding info for acpi:device:06
PM: Adding info for acpi:device:07
PM: Adding info for acpi:device:08
PM: Adding info for acpi:PNP0000:00
PM: Adding info for acpi:PNP0200:00
PM: Adding info for acpi:PNP0100:00
PM: Adding info for acpi:PNP0B00:00
PM: Adding info for acpi:PNP0800:00
PM: Adding info for acpi:PNP0C04:00
PM: Adding info for acpi:PNP0700:00
PM: Adding info for acpi:PNP0401:00
PM: Adding info for acpi:PNP0C02:00
PM: Adding info for acpi:PNP0C02:01
PM: Adding info for acpi:ATK0110:00
PM: Adding info for acpi:PNP0C02:02
PM: Adding info for acpi:PNP0501:00
PM: Adding info for acpi:PNP0C02:03
PM: Adding info for acpi:device:09
PM: Adding info for acpi:device:0a
PM: Adding info for acpi:device:0b
PM: Adding info for acpi:device:0c
PM: Adding info for acpi:device:0d
PM: Adding info for acpi:device:0e
PM: Adding info for acpi:device:0f
PM: Adding info for acpi:device:10
PM: Adding info for acpi:device:11
PM: Adding info for acpi:device:12
PM: Adding info for acpi:device:13
PM: Adding info for acpi:device:14
PM: Adding info for acpi:device:15
PM: Adding info for acpi:device:16
PM: Adding info for acpi:PNP0C01:01
PM: Adding info for acpi:PNP0C0C:00
PM: Adding info for acpi:PNP0C0F:00
PM: Adding info for acpi:PNP0C0F:01
PM: Adding info for acpi:PNP0C0F:02
PM: Adding info for acpi:PNP0C0F:03
PM: Adding info for acpi:PNP0C0F:04
PM: Adding info for acpi:PNP0C0F:05
PM: Adding info for acpi:PNP0C0F:06
PM: Adding info for acpi:PNP0C0F:07
PM: Adding info for acpi:LNXTHERM:00
PM: Adding info for acpi:LNXPWRBN:00
ACPI Warning: Incorrect checksum in table [OEMB] - 5F, should be 52 (20090903/tbutils-314)
initcall acpi_init+0x0/0x134 returned 0 after 957029 usecs
calling dock_init+0x0/0x8d @ 1
ACPI: No dock devices found.
initcall dock_init+0x0/0x8d returned 0 after 3255 usecs
calling acpi_pci_root_init+0x0/0x28 @ 1
ACPI: PCI Root Bridge [PCI0] (0000:00)
PM: Adding info for No Bus:pci0000:00
PM: Adding info for No Bus:0000:00
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xd7cf8000-0xd7cfbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x7000-0x701f]
pci 0000:00:1d.1: reg 20 io port: [0x7400-0x741f]
pci 0000:00:1d.2: reg 20 io port: [0x7800-0x781f]
pci 0000:00:1d.3: reg 20 io port: [0x8000-0x801f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xd7cff800-0xd7cffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10 io port: [0x9800-0x9807]
pci 0000:00:1f.2: reg 14 io port: [0x9400-0x9403]
pci 0000:00:1f.2: reg 18 io port: [0x9000-0x9007]
pci 0000:00:1f.2: reg 1c io port: [0x8800-0x8803]
pci 0000:00:1f.2: reg 20 io port: [0x8400-0x840f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xd7cffc00-0xd7cfffff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:04:00.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff]
pci 0000:04:00.0: reg 14 io port: [0xe000-0xe0ff]
pci 0000:04:00.0: reg 18 32bit mmio: [0xd7fe0000-0xd7feffff]
pci 0000:04:00.0: reg 30 32bit mmio pref: [0xd7fc0000-0xd7fdffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.1: reg 10 32bit mmio: [0xd7ff0000-0xd7ffffff]
pci 0000:04:00.1: supports D1 D2
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd7f00000-0xd7ffffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff]
pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xd7efc000-0xd7efffff]
pci 0000:02:00.0: reg 18 io port: [0xc800-0xc8ff]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xd7ec0000-0xd7edffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xd7e00000-0xd7efffff]
pci 0000:01:01.0: reg 10 32bit mmio: [0xd7ddf000-0xd7ddffff]
pci 0000:01:01.0: reg 14 32bit mmio: [0xd7dde000-0xd7ddefff]
pci 0000:01:01.0: supports D1
pci 0000:01:03.0: reg 10 io port: [0xb800-0xb807]
pci 0000:01:03.0: reg 14 io port: [0xb400-0xb403]
pci 0000:01:03.0: reg 18 io port: [0xb000-0xb007]
pci 0000:01:03.0: reg 1c io port: [0xa800-0xa803]
pci 0000:01:03.0: reg 20 io port: [0xa400-0xa40f]
pci 0000:01:03.0: reg 30 32bit mmio pref: [0xd7de0000-0xd7dfffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xa000-0xbfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xd7d00000-0xd7dfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
PM: Adding info for pci:0000:00:00.0
PM: Adding info for pci:0000:00:01.0
PM: Adding info for pci:0000:00:1b.0
PM: Adding info for pci:0000:00:1c.0
PM: Adding info for pci:0000:00:1c.3
PM: Adding info for pci:0000:00:1d.0
PM: Adding info for pci:0000:00:1d.1
PM: Adding info for pci:0000:00:1d.2
PM: Adding info for pci:0000:00:1d.3
PM: Adding info for pci:0000:00:1d.7
PM: Adding info for pci:0000:00:1e.0
PM: Adding info for pci:0000:00:1f.0
PM: Adding info for pci:0000:00:1f.1
PM: Adding info for pci:0000:00:1f.2
PM: Adding info for pci:0000:00:1f.3
PM: Adding info for pci:0000:04:00.0
PM: Adding info for pci:0000:04:00.1
PM: Adding info for No Bus:0000:04
PM: Adding info for No Bus:0000:03
PM: Adding info for pci:0000:02:00.0
PM: Adding info for No Bus:0000:02
PM: Adding info for pci:0000:01:01.0
Clocksource tsc unstable (delta = 115790085 ns)
PM: Adding info for pci:0000:01:03.0
PM: Adding info for No Bus:0000:01
initcall acpi_pci_root_init+0x0/0x28 returned 0 after 475259 usecs
calling acpi_pci_link_init+0x0/0x43 @ 1
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
initcall acpi_pci_link_init+0x0/0x43 returned 0 after 58593 usecs
calling pnp_init+0x0/0x12 @ 1
initcall pnp_init+0x0/0x12 returned 0 after 0 usecs
calling setup_shutdown_event+0x0/0x14 @ 1
initcall setup_shutdown_event+0x0/0x14 returned 0 after 0 usecs
calling misc_init+0x0/0xb7 @ 1
initcall misc_init+0x0/0xb7 returned 0 after 0 usecs
calling vga_arb_device_init+0x0/0x80 @ 1
PM: Adding info for No Bus:vga_arbiter
vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
initcall vga_arb_device_init+0x0/0x80 returned 0 after 6510 usecs
calling init_scsi+0x0/0x81 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x81 returned 0 after 3255 usecs
calling ata_init+0x0/0x8d @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x8d returned 0 after 3255 usecs
calling phy_init+0x0/0x2e @ 1
initcall phy_init+0x0/0x2e returned 0 after 0 usecs
calling init_pcmcia_cs+0x0/0x36 @ 1
initcall init_pcmcia_cs+0x0/0x36 returned 0 after 0 usecs
calling nop_usb_xceiv_init+0x0/0x12 @ 1
initcall nop_usb_xceiv_init+0x0/0x12 returned 0 after 0 usecs
calling usb_init+0x0/0x1ad @ 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x1ad returned 0 after 13020 usecs
calling serio_init+0x0/0x86 @ 1
initcall serio_init+0x0/0x86 returned 0 after 0 usecs
calling input_init+0x0/0xbd @ 1
khelper used greatest stack depth: 5224 bytes left
initcall input_init+0x0/0xbd returned 0 after 3255 usecs
calling init_dvbdev+0x0/0xd7 @ 1
initcall init_dvbdev+0x0/0xd7 returned 0 after 0 usecs
calling power_supply_class_init+0x0/0x38 @ 1
initcall power_supply_class_init+0x0/0x38 returned 0 after 0 usecs
calling thermal_init+0x0/0x57 @ 1
initcall thermal_init+0x0/0x57 returned 0 after 0 usecs
calling ac97_bus_init+0x0/0x12 @ 1
initcall ac97_bus_init+0x0/0x12 returned 0 after 0 usecs
calling pci_subsys_init+0x0/0x107 @ 1
PCI: Using ACPI for IRQ routing
initcall pci_subsys_init+0x0/0x107 returned 0 after 3255 usecs
calling proto_init+0x0/0x12 @ 1
initcall proto_init+0x0/0x12 returned 0 after 0 usecs
calling net_dev_init+0x0/0x15e @ 1
PM: Adding info for No Bus:lo
initcall net_dev_init+0x0/0x15e returned 0 after 3255 usecs
calling neigh_init+0x0/0x71 @ 1
initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
calling genl_init+0x0/0x8f @ 1
initcall genl_init+0x0/0x8f returned 0 after 0 usecs
calling cipso_v4_init+0x0/0x88 @ 1
initcall cipso_v4_init+0x0/0x88 returned 0 after 0 usecs
calling wanrouter_init+0x0/0x55 @ 1
Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
initcall wanrouter_init+0x0/0x55 returned 0 after 3255 usecs
calling bt_init+0x0/0x5a @ 1
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
initcall bt_init+0x0/0x5a returned 0 after 9765 usecs
calling wireless_nlevent_init+0x0/0x12 @ 1
initcall wireless_nlevent_init+0x0/0x12 returned 0 after 0 usecs
calling netlbl_init+0x0/0x81 @ 1
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x81 returned 0 after 13020 usecs
calling rfkill_init+0x0/0x79 @ 1
PM: Adding info for No Bus:rfkill
initcall rfkill_init+0x0/0x79 returned 0 after 3255 usecs
calling wpan_phy_class_init+0x0/0x19 @ 1
initcall wpan_phy_class_init+0x0/0x19 returned 0 after 0 usecs
calling pci_iommu_init+0x0/0x17 @ 1
initcall pci_iommu_init+0x0/0x17 returned 0 after 0 usecs
calling print_all_ICs+0x0/0x4b @ 1
printing PIC contents
... PIC IMR: ffff
... PIC IRR: 0c29
... PIC ISR: 0000
... PIC ELCR: 0e28
printing local APIC contents on CPU#0/0:
... APIC ID: 00000000 (0)
... APIC VERSION: 00050014
... APIC TASKPRI: 00000000 (00)
... APIC PROCPRI: 00000000
... APIC LDR: 01000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0000000000000000000000000000000000000000000000000000000000000000
... APIC TMR field:
0000000000000000000000000000000000000000000000000000000000000000
... APIC IRR field:
0000000000000000000000000000000000000000000000000000000000008000
... APIC ESR: 00000000
... APIC ICR: 000c0630
... APIC ICR2: ff000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00010000
... APIC LVT0: 00010700
... APIC LVT1: 00000400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000bb87
... APIC TMCCT: 000027f5
... APIC TDCR: 00000003
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170020
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0020
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 000 1 0 0 0 0 0 0 00
01 001 0 0 0 0 0 1 1 31
02 001 0 0 0 0 0 1 1 30
03 001 0 0 0 0 0 1 1 33
04 001 0 0 0 0 0 1 1 34
05 001 0 0 0 0 0 1 1 35
06 001 0 0 0 0 0 1 1 36
07 001 0 0 0 0 0 1 1 37
08 001 0 0 0 0 0 1 1 38
09 001 0 1 0 0 0 1 1 39
0a 001 0 0 0 0 0 1 1 3A
0b 001 0 0 0 0 0 1 1 3B
0c 001 0 0 0 0 0 1 1 3C
0d 001 0 0 0 0 0 1 1 3D
0e 001 0 0 0 0 0 1 1 3E
0f 001 0 0 0 0 0 1 1 3F
10 000 1 0 0 0 0 0 0 00
11 000 1 0 0 0 0 0 0 00
12 000 1 0 0 0 0 0 0 00
13 000 1 0 0 0 0 0 0 00
14 000 1 0 0 0 0 0 0 00
15 000 1 0 0 0 0 0 0 00
16 000 1 0 0 0 0 0 0 00
17 000 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
initcall print_all_ICs+0x0/0x4b returned 0 after 175780 usecs
calling hpet_late_init+0x0/0x6b @ 1
hpet clockevent registered
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
initcall hpet_late_init+0x0/0x6b returned 0 after 13020 usecs
calling clocksource_done_booting+0x0/0x38 @ 1
Switching to clocksource hpet
initcall clocksource_done_booting+0x0/0x38 returned 0 after 3258 usecs
calling ftrace_init_debugfs+0x0/0xba @ 1
initcall ftrace_init_debugfs+0x0/0xba returned 0 after 167 usecs
calling rb_init_debugfs+0x0/0x2f @ 1
initcall rb_init_debugfs+0x0/0x2f returned 0 after 18 usecs
calling tracer_init_debugfs+0x0/0x24d @ 1
initcall tracer_init_debugfs+0x0/0x24d returned 0 after 774 usecs
calling init_trace_printk_function_export+0x0/0x2f @ 1
initcall init_trace_printk_function_export+0x0/0x2f returned 0 after 18 usecs
calling stat_workqueue_init+0x0/0x2b @ 1
initcall stat_workqueue_init+0x0/0x2b returned 0 after 41 usecs
calling event_trace_init+0x0/0x1f7 @ 1
initcall event_trace_init+0x0/0x1f7 returned 0 after 37202 usecs
calling init_pipe_fs+0x0/0x4c @ 1
initcall init_pipe_fs+0x0/0x4c returned 0 after 162 usecs
calling eventpoll_init+0x0/0xe3 @ 1
initcall eventpoll_init+0x0/0xe3 returned 0 after 27 usecs
calling anon_inode_init+0x0/0x127 @ 1
initcall anon_inode_init+0x0/0x127 returned 0 after 73 usecs
calling tomoyo_initerface_init+0x0/0x11b @ 1
initcall tomoyo_initerface_init+0x0/0x11b returned 0 after 263 usecs
calling blk_scsi_ioctl_init+0x0/0x289 @ 1
initcall blk_scsi_ioctl_init+0x0/0x289 returned 0 after 1 usecs
calling acpi_event_init+0x0/0x81 @ 1
initcall acpi_event_init+0x0/0x81 returned 0 after 108 usecs
calling pnpacpi_init+0x0/0x8c @ 1
pnp: PnP ACPI init
PM: Adding info for No Bus:pnp0
ACPI: bus type pnp registered
PM: Adding info for pnp:00:00
PM: Adding info for pnp:00:01
PM: Adding info for pnp:00:02
IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
PM: Adding info for pnp:00:03
PM: Adding info for pnp:00:04
IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
PM: Adding info for pnp:00:05
IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
PM: Adding info for pnp:00:06
IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
PM: Adding info for pnp:00:07
PM: Adding info for pnp:00:08
PM: Adding info for pnp:00:09
PM: Adding info for pnp:00:0a
IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
PM: Adding info for pnp:00:0b
PM: Adding info for pnp:00:0c
PM: Adding info for pnp:00:0d
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
initcall pnpacpi_init+0x0/0x8c returned 0 after 157696 usecs
calling pnp_system_init+0x0/0x12 @ 1
system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
system 00:08: ioport range 0x290-0x297 has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:09: ioport range 0x800-0x87f has been reserved
system 00:09: ioport range 0x480-0x4bf has been reserved
system 00:09: ioport range 0x900-0x91f has been reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xdffff has been reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
initcall pnp_system_init+0x0/0x12 returned 0 after 95376 usecs
calling chr_dev_init+0x0/0xc3 @ 1
PM: Adding info for No Bus:mem
PM: Adding info for No Bus:kmem
PM: Adding info for No Bus:null
PM: Adding info for No Bus:port
PM: Adding info for No Bus:zero
PM: Adding info for No Bus:full
PM: Adding info for No Bus:random
PM: Adding info for No Bus:urandom
PM: Adding info for No Bus:kmsg
initcall chr_dev_init+0x0/0xc3 returned 0 after 30412 usecs
calling firmware_class_init+0x0/0x79 @ 1
initcall firmware_class_init+0x0/0x79 returned 0 after 261 usecs
calling ssb_modinit+0x0/0x49 @ 1
initcall ssb_modinit+0x0/0x49 returned 0 after 330 usecs
calling pcibios_assign_resources+0x0/0x74 @ 1
pci 0000:01:03.0: BAR 6: address space collision on of device [0xd7de0000-0xd7dfffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:04
pci 0000:00:01.0: IO window: 0xe000-0xefff
pci 0000:00:01.0: MEM window: 0xd7f00000-0xd7ffffff
pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.0: IO window: 0xd000-0xdfff
pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.3: IO window: 0xc000-0xcfff
pci 0000:00:1c.3: MEM window: 0xd7e00000-0xd7efffff
pci 0000:00:1c.3: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0: IO window: 0xa000-0xbfff
pci 0000:00:1e.0: MEM window: 0xd7d00000-0xd7dfffff
pci 0000:00:1e.0: PREFETCH window: 0x80400000-0x804fffff
IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1)
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
IOAPIC[0]: Set routing entry (2-19 -> 0x51 -> IRQ 19 Mode:1 Active:1)
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:04: resource 0 io: [0xe000-0xefff]
pci_bus 0000:04: resource 1 mem: [0xd7f00000-0xd7ffffff]
pci_bus 0000:04: resource 2 pref mem [0xd8000000-0xdfffffff]
pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:03: resource 1 mem: [0x80000000-0x801fffff]
pci_bus 0000:03: resource 2 pref mem [0x80200000-0x803fffff]
pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:02: resource 1 mem: [0xd7e00000-0xd7efffff]
pci_bus 0000:01: resource 0 io: [0xa000-0xbfff]
pci_bus 0000:01: resource 1 mem: [0xd7d00000-0xd7dfffff]
pci_bus 0000:01: resource 2 pref mem [0x80400000-0x804fffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
initcall pcibios_assign_resources+0x0/0x74 returned 0 after 201862 usecs
calling inet_init+0x0/0x199 @ 1
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
IPv4 FIB: Using LC-trie version 0.409
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 32768 (order: 9, 2359296 bytes)
TCP: Hash tables configured (established 262144 bind 32768)
TCP reno registered
initcall inet_init+0x0/0x199 returned 0 after 38666 usecs
calling af_unix_init+0x0/0x55 @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x55 returned 0 after 3138 usecs
calling populate_rootfs+0x0/0x10f @ 1
initcall populate_rootfs+0x0/0x10f returned 0 after 422 usecs
calling calgary_fixup_tce_spaces+0x0/0xf9 @ 1
initcall calgary_fixup_tce_spaces+0x0/0xf9 returned -19 after 0 usecs
calling irqfd_module_init+0x0/0x35 @ 1
initcall irqfd_module_init+0x0/0x35 returned 0 after 168 usecs
calling vmx_init+0x0/0x1fd @ 1
PM: Adding info for No Bus:kvm
initcall vmx_init+0x0/0x1fd returned 0 after 4498 usecs
calling i8259A_init_sysfs+0x0/0x22 @ 1
initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 499 usecs
calling vsyscall_init+0x0/0xbd @ 1
initcall vsyscall_init+0x0/0xbd returned 0 after 1 usecs
calling sbf_init+0x0/0xe9 @ 1
initcall sbf_init+0x0/0xe9 returned 0 after 0 usecs
calling i8237A_init_sysfs+0x0/0x22 @ 1
initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 601 usecs
calling add_rtc_cmos+0x0/0xa9 @ 1
initcall add_rtc_cmos+0x0/0xa9 returned 0 after 3 usecs
calling cache_sysfs_init+0x0/0x26 @ 1
initcall cache_sysfs_init+0x0/0x26 returned 0 after 911 usecs
calling cpu_debug_init+0x0/0xa9 @ 1
cpu0(1) debug files 237
initcall cpu_debug_init+0x0/0xa9 returned 0 after 12677 usecs
calling mce_init_device+0x0/0xc6 @ 1
PM: Adding info for No Bus:mcelog
initcall mce_init_device+0x0/0xc6 returned 0 after 4075 usecs
calling inject_init+0x0/0x32 @ 1
Machine check injector initialized
initcall inject_init+0x0/0x32 returned 0 after 3183 usecs
calling thermal_throttle_init_device+0x0/0x3e @ 1
initcall thermal_throttle_init_device+0x0/0x3e returned 0 after 38 usecs
calling cpuid_init+0x0/0xdf @ 1
PM: Adding info for No Bus:cpu0
initcall cpuid_init+0x0/0xdf returned 0 after 3619 usecs
calling ioapic_init_sysfs+0x0/0xb3 @ 1
initcall ioapic_init_sysfs+0x0/0xb3 returned 0 after 506 usecs
calling microcode_init+0x0/0xfe @ 1
PM: Adding info for platform:microcode
microcode: CPU0 sig=0xf62, pf=0x4, revision=0xf
PM: Adding info for No Bus:microcode
Microcode Update Driver: v2.00 <tigran@...azian.fsnet.co.uk>, Peter Oruba
initcall microcode_init+0x0/0xfe returned 0 after 18589 usecs
calling start_periodic_check_for_corruption+0x0/0x3c @ 1
Scanning for low memory corruption every 60 seconds
initcall start_periodic_check_for_corruption+0x0/0x3c returned 0 after 4624 usecs
calling audit_classes_init+0x0/0xaf @ 1
initcall audit_classes_init+0x0/0xaf returned 0 after 88 usecs
calling start_pageattr_test+0x0/0x47 @ 1
initcall start_pageattr_test+0x0/0x47 returned 0 after 71 usecs
calling crypto_fpu_module_init+0x0/0x12 @ 1
initcall crypto_fpu_module_init+0x0/0x12 returned 0 after 40 usecs
calling aes_init+0x0/0x12 @ 1
initcall aes_init+0x0/0x12 returned 0 after 199 usecs
calling aesni_init+0x0/0x142 @ 1
Intel AES-NI instructions are not detected.
initcall aesni_init+0x0/0x142 returned -19 after 3944 usecs
calling init_vdso_vars+0x0/0x210 @ 1
initcall init_vdso_vars+0x0/0x210 returned 0 after 53 usecs
calling sysenter_setup+0x0/0xaf @ 1
initcall sysenter_setup+0x0/0xaf returned 0 after 7 usecs
calling init_sched_debug_procfs+0x0/0x2c @ 1
initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 26 usecs
calling proc_schedstat_init+0x0/0x22 @ 1
initcall proc_schedstat_init+0x0/0x22 returned 0 after 18 usecs
calling proc_execdomains_init+0x0/0x22 @ 1
initcall proc_execdomains_init+0x0/0x22 returned 0 after 17 usecs
calling ioresources_init+0x0/0x3c @ 1
initcall ioresources_init+0x0/0x3c returned 0 after 32 usecs
calling uid_cache_init+0x0/0x8a @ 1
initcall uid_cache_init+0x0/0x8a returned 0 after 18 usecs
calling init_posix_timers+0x0/0x17a @ 1
initcall init_posix_timers+0x0/0x17a returned 0 after 12 usecs
calling init_posix_cpu_timers+0x0/0xe5 @ 1
initcall init_posix_cpu_timers+0x0/0xe5 returned 0 after 0 usecs
calling nsproxy_cache_init+0x0/0x2d @ 1
initcall nsproxy_cache_init+0x0/0x2d returned 0 after 3 usecs
calling create_proc_profile+0x0/0x4b @ 1
initcall create_proc_profile+0x0/0x4b returned 0 after 18 usecs
calling timekeeping_init_device+0x0/0x22 @ 1
initcall timekeeping_init_device+0x0/0x22 returned 0 after 472 usecs
calling init_clocksource_sysfs+0x0/0x50 @ 1
initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 573 usecs
calling init_timer_list_procfs+0x0/0x2c @ 1
initcall init_timer_list_procfs+0x0/0x2c returned 0 after 33 usecs
calling lockdep_proc_init+0x0/0x5f @ 1
initcall lockdep_proc_init+0x0/0x5f returned 0 after 48 usecs
calling futex_init+0x0/0x7d @ 1
initcall futex_init+0x0/0x7d returned 0 after 6 usecs
calling init_rttest+0x0/0x155 @ 1
Initializing RT-Tester: OK
initcall init_rttest+0x0/0x155 returned 0 after 5544 usecs
calling proc_dma_init+0x0/0x22 @ 1
initcall proc_dma_init+0x0/0x22 returned 0 after 39 usecs
calling proc_modules_init+0x0/0x22 @ 1
initcall proc_modules_init+0x0/0x22 returned 0 after 18 usecs
calling kallsyms_init+0x0/0x25 @ 1
initcall kallsyms_init+0x0/0x25 returned 0 after 18 usecs
calling snapshot_device_init+0x0/0x12 @ 1
PM: Adding info for No Bus:snapshot
initcall snapshot_device_init+0x0/0x12 returned 0 after 3632 usecs
calling crash_save_vmcoreinfo_init+0x0/0x4a5 @ 1
initcall crash_save_vmcoreinfo_init+0x0/0x4a5 returned 0 after 28 usecs
calling crash_notes_memory_init+0x0/0x88 @ 1
initcall crash_notes_memory_init+0x0/0x88 returned 0 after 23 usecs
calling backtrace_regression_test+0x0/0x105 @ 1
====[ backtrace testing ]===========
Testing a backtrace from process context.
The following trace is a kernel self test and not a bug!
Pid: 1, comm: swapper Not tainted 2.6.32-rc4 #1
Call Trace:
[<ffffffff810aa403>] ? backtrace_regression_test+0x0/0x105
[<ffffffff810aa440>] backtrace_regression_test+0x3d/0x105
[<ffffffff817756db>] ? printk+0x41/0x43
[<ffffffff8108e8f3>] ? ktime_get+0x65/0xbb
[<ffffffff810aa403>] ? backtrace_regression_test+0x0/0x105
[<ffffffff810aa403>] ? backtrace_regression_test+0x0/0x105
[<ffffffff8100a05c>] do_one_initcall+0x5c/0x15b
[<ffffffff81def660>] do_basic_setup+0x4f/0x61
[<ffffffff81def6cf>] kernel_init+0x5d/0xa0
[<ffffffff81777f54>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff81039dca>] child_rip+0xa/0x20
[<ffffffff8106a56a>] ? T.1296+0x0/0xd5
[<ffffffff810398ce>] ? restore_args+0x0/0x30
[<ffffffff81def672>] ? kernel_init+0x0/0xa0
[<ffffffff81039dc0>] ? child_rip+0x0/0x20
Testing a backtrace from irq context.
The following trace is a kernel self test and not a bug!
Pid: 3, comm: ksoftirqd/0 Not tainted 2.6.32-rc4 #1
Call Trace:
<IRQ> [<ffffffff810aa3f5>] backtrace_test_irq_callback+0xe/0x1c
[<ffffffff810746e0>] tasklet_action+0x63/0xaa
[<ffffffff810758c8>] __do_softirq+0xe0/0x1b4
[<ffffffff81039eca>] call_softirq+0x1a/0x30
<EOI> [<ffffffff8103b8d5>] do_softirq+0x49/0xa4
[<ffffffff81075293>] ksoftirqd+0x4c/0xc9
[<ffffffff81075247>] ? ksoftirqd+0x0/0xc9
[<ffffffff81086b98>] kthread+0x7e/0x86
[<ffffffff81039dca>] child_rip+0xa/0x20
[<ffffffff8106a56a>] ? T.1296+0x0/0xd5
[<ffffffff810398ce>] ? restore_args+0x0/0x30
[<ffffffff81086b1a>] ? kthread+0x0/0x86
[<ffffffff81039dc0>] ? child_rip+0x0/0x20
Testing a saved backtrace.
The following trace is a kernel self test and not a bug!
[<ffffffff81043bbd>] save_stack_trace+0x2e/0x4b
[<ffffffff810aa4e4>] backtrace_regression_test+0xe1/0x105
[<ffffffff8100a05c>] do_one_initcall+0x5c/0x15b
[<ffffffff81def660>] do_basic_setup+0x4f/0x61
[<ffffffff81def6cf>] kernel_init+0x5d/0xa0
[<ffffffff81039dca>] child_rip+0xa/0x20
[<ffffffffffffffff>] 0xffffffffffffffff
====[ end of backtrace testing ]====
initcall backtrace_regression_test+0x0/0x105 returned 0 after 191206 usecs
calling audit_init+0x0/0x153 @ 1
audit: initializing netlink socket (disabled)
type=2000 audit(1255339340.578:1): initialized
initcall audit_init+0x0/0x153 returned 0 after 8401 usecs
calling audit_tree_init+0x0/0x49 @ 1
initcall audit_tree_init+0x0/0x49 returned 0 after 10 usecs
calling hung_task_init+0x0/0x53 @ 1
initcall hung_task_init+0x0/0x53 returned 0 after 65 usecs
calling rcuclassic_trace_init+0x0/0xf8 @ 1
initcall rcuclassic_trace_init+0x0/0xf8 returned 0 after 121 usecs
calling init_tracepoints+0x0/0x17 @ 1
initcall init_tracepoints+0x0/0x17 returned 0 after 1 usecs
calling init_lstats_procfs+0x0/0x25 @ 1
initcall init_lstats_procfs+0x0/0x25 returned 0 after 19 usecs
calling ftrace_mod_cmd_init+0x0/0x12 @ 1
initcall ftrace_mod_cmd_init+0x0/0x12 returned 0 after 11 usecs
calling init_events+0x0/0x64 @ 1
initcall init_events+0x0/0x64 returned 0 after 13 usecs
calling init_sched_switch_trace+0x0/0x12 @ 1
initcall init_sched_switch_trace+0x0/0x12 returned 0 after 4 usecs
calling init_stack_trace+0x0/0x12 @ 1
initcall init_stack_trace+0x0/0x12 returned 0 after 2 usecs
calling init_function_trace+0x0/0x3e @ 1
initcall init_function_trace+0x0/0x3e returned 0 after 3 usecs
calling init_irqsoff_tracer+0x0/0x14 @ 1
initcall init_irqsoff_tracer+0x0/0x14 returned 0 after 2 usecs
calling init_wakeup_tracer+0x0/0x22 @ 1
initcall init_wakeup_tracer+0x0/0x22 returned 0 after 3 usecs
calling stack_trace_init+0x0/0x6b @ 1
initcall stack_trace_init+0x0/0x6b returned 0 after 52 usecs
calling init_blk_tracer+0x0/0x55 @ 1
initcall init_blk_tracer+0x0/0x55 returned 0 after 4 usecs
calling perf_event_sysfs_init+0x0/0x19 @ 1
initcall perf_event_sysfs_init+0x0/0x19 returned 0 after 30 usecs
calling init_per_zone_wmark_min+0x0/0x67 @ 1
initcall init_per_zone_wmark_min+0x0/0x67 returned 0 after 149 usecs
calling kswapd_init+0x0/0x14 @ 1
initcall kswapd_init+0x0/0x14 returned 0 after 73 usecs
calling setup_vmstat+0x0/0x7c @ 1
initcall setup_vmstat+0x0/0x7c returned 0 after 80 usecs
calling mm_sysfs_init+0x0/0x29 @ 1
initcall mm_sysfs_init+0x0/0x29 returned 0 after 29 usecs
calling proc_vmalloc_init+0x0/0x25 @ 1
initcall proc_vmalloc_init+0x0/0x25 returned 0 after 18 usecs
calling procswaps_init+0x0/0x22 @ 1
initcall procswaps_init+0x0/0x22 returned 0 after 18 usecs
calling pfn_inject_init+0x0/0x64 @ 1
initcall pfn_inject_init+0x0/0x64 returned 0 after 34 usecs
calling fasync_init+0x0/0x2a @ 1
initcall fasync_init+0x0/0x2a returned 0 after 5 usecs
calling proc_filesystems_init+0x0/0x22 @ 1
initcall proc_filesystems_init+0x0/0x22 returned 0 after 19 usecs
calling dnotify_init+0x0/0x80 @ 1
initcall dnotify_init+0x0/0x80 returned 0 after 22 usecs
calling inotify_setup+0x0/0x12 @ 1
initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs
calling inotify_user_setup+0x0/0xbe @ 1
initcall inotify_user_setup+0x0/0xbe returned 0 after 82 usecs
calling aio_setup+0x0/0xa5 @ 1
initcall aio_setup+0x0/0xa5 returned 0 after 91 usecs
calling proc_locks_init+0x0/0x22 @ 1
initcall proc_locks_init+0x0/0x22 returned 0 after 21 usecs
calling init_sys32_ioctl+0x0/0x83 @ 1
initcall init_sys32_ioctl+0x0/0x83 returned 0 after 18 usecs
calling init_mbcache+0x0/0x14 @ 1
initcall init_mbcache+0x0/0x14 returned 0 after 3 usecs
calling proc_cmdline_init+0x0/0x22 @ 1
initcall proc_cmdline_init+0x0/0x22 returned 0 after 19 usecs
calling proc_cpuinfo_init+0x0/0x22 @ 1
initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 19 usecs
calling proc_devices_init+0x0/0x22 @ 1
initcall proc_devices_init+0x0/0x22 returned 0 after 19 usecs
calling proc_interrupts_init+0x0/0x22 @ 1
initcall proc_interrupts_init+0x0/0x22 returned 0 after 18 usecs
calling proc_loadavg_init+0x0/0x22 @ 1
initcall proc_loadavg_init+0x0/0x22 returned 0 after 18 usecs
calling proc_meminfo_init+0x0/0x22 @ 1
initcall proc_meminfo_init+0x0/0x22 returned 0 after 18 usecs
calling proc_stat_init+0x0/0x22 @ 1
initcall proc_stat_init+0x0/0x22 returned 0 after 21 usecs
calling proc_uptime_init+0x0/0x22 @ 1
initcall proc_uptime_init+0x0/0x22 returned 0 after 19 usecs
calling proc_version_init+0x0/0x22 @ 1
initcall proc_version_init+0x0/0x22 returned 0 after 18 usecs
calling proc_softirqs_init+0x0/0x22 @ 1
initcall proc_softirqs_init+0x0/0x22 returned 0 after 18 usecs
calling proc_kmsg_init+0x0/0x25 @ 1
initcall proc_kmsg_init+0x0/0x25 returned 0 after 19 usecs
calling configfs_init+0x0/0xb3 @ 1
initcall configfs_init+0x0/0xb3 returned 0 after 32 usecs
calling init_devpts_fs+0x0/0x4c @ 1
initcall init_devpts_fs+0x0/0x4c returned 0 after 100 usecs
calling init_ext3_fs+0x0/0x71 @ 1
initcall init_ext3_fs+0x0/0x71 returned 0 after 47 usecs
calling init_ext4_fs+0x0/0xe9 @ 1
initcall init_ext4_fs+0x0/0xe9 returned 0 after 99 usecs
calling journal_init+0x0/0x1e @ 1
initcall journal_init+0x0/0x1e returned 0 after 36 usecs
calling journal_init+0x0/0x73 @ 1
initcall journal_init+0x0/0x73 returned 0 after 58 usecs
calling init_cramfs_fs+0x0/0x2e @ 1
initcall init_cramfs_fs+0x0/0x2e returned 0 after 54 usecs
calling init_ramfs_fs+0x0/0x12 @ 1
initcall init_ramfs_fs+0x0/0x12 returned 0 after 2 usecs
calling init_fat_fs+0x0/0x4f @ 1
initcall init_fat_fs+0x0/0x4f returned 0 after 14 usecs
calling init_vfat_fs+0x0/0x12 @ 1
initcall init_vfat_fs+0x0/0x12 returned 0 after 2 usecs
calling init_msdos_fs+0x0/0x12 @ 1
initcall init_msdos_fs+0x0/0x12 returned 0 after 2 usecs
calling init_hfsplus_fs+0x0/0x5f @ 1
initcall init_hfsplus_fs+0x0/0x5f returned 0 after 10 usecs
calling ecryptfs_init+0x0/0x1d5 @ 1
PM: Adding info for No Bus:ecryptfs
initcall ecryptfs_init+0x0/0x1d5 returned 0 after 3849 usecs
calling init_nls_cp850+0x0/0x12 @ 1
initcall init_nls_cp850+0x0/0x12 returned 0 after 9 usecs
calling init_nls_cp852+0x0/0x12 @ 1
initcall init_nls_cp852+0x0/0x12 returned 0 after 0 usecs
calling init_nls_cp855+0x0/0x12 @ 1
initcall init_nls_cp855+0x0/0x12 returned 0 after 0 usecs
calling init_nls_cp860+0x0/0x12 @ 1
initcall init_nls_cp860+0x0/0x12 returned 0 after 0 usecs
calling init_nls_cp864+0x0/0x12 @ 1
initcall init_nls_cp864+0x0/0x12 returned 0 after 0 usecs
calling init_nls_ascii+0x0/0x12 @ 1
initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs
calling init_nls_iso8859_1+0x0/0x12 @ 1
initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 usecs
calling init_nls_iso8859_5+0x0/0x12 @ 1
initcall init_nls_iso8859_5+0x0/0x12 returned 0 after 1 usecs
calling init_nls_cp1255+0x0/0x12 @ 1
initcall init_nls_cp1255+0x0/0x12 returned 0 after 0 usecs
calling init_nls_iso8859_14+0x0/0x12 @ 1
initcall init_nls_iso8859_14+0x0/0x12 returned 0 after 1 usecs
calling init_nls_koi8_u+0x0/0x12 @ 1
initcall init_nls_koi8_u+0x0/0x12 returned 0 after 1 usecs
calling init_nls_koi8_ru+0x0/0x48 @ 1
initcall init_nls_koi8_ru+0x0/0x48 returned 0 after 1 usecs
calling init_nls_utf8+0x0/0x29 @ 1
initcall init_nls_utf8+0x0/0x29 returned 0 after 1 usecs
calling init_efs_fs+0x0/0x71 @ 1
EFS: 1.0a - http://aeschi.ch.eu.org/efs/
initcall init_efs_fs+0x0/0x71 returned 0 after 3718 usecs
calling init_affs_fs+0x0/0x63 @ 1
initcall init_affs_fs+0x0/0x63 returned 0 after 10 usecs
calling init_adfs_fs+0x0/0x63 @ 1
initcall init_adfs_fs+0x0/0x63 returned 0 after 10 usecs
calling init_befs_fs+0x0/0x7f @ 1
BeFS version: 0.9.3
initcall init_befs_fs+0x0/0x7f returned 0 after 1921 usecs
calling ipc_init+0x0/0x23 @ 1
msgmni has been set to 3974
initcall ipc_init+0x0/0x23 returned 0 after 2665 usecs
calling init_mqueue_fs+0x0/0xc7 @ 1
initcall init_mqueue_fs+0x0/0xc7 returned 0 after 119 usecs
calling key_proc_init+0x0/0x59 @ 1
initcall key_proc_init+0x0/0x59 returned 0 after 34 usecs
calling crypto_wq_init+0x0/0x32 @ 1
initcall crypto_wq_init+0x0/0x32 returned 0 after 80 usecs
calling crypto_algapi_init+0x0/0xd @ 1
initcall crypto_algapi_init+0x0/0xd returned 0 after 22 usecs
calling skcipher_module_init+0x0/0x13 @ 1
initcall skcipher_module_init+0x0/0x13 returned 0 after 0 usecs
calling chainiv_module_init+0x0/0x12 @ 1
initcall chainiv_module_init+0x0/0x12 returned 0 after 5 usecs
calling eseqiv_module_init+0x0/0x12 @ 1
initcall eseqiv_module_init+0x0/0x12 returned 0 after 4 usecs
calling seqiv_module_init+0x0/0x12 @ 1
initcall seqiv_module_init+0x0/0x12 returned 0 after 4 usecs
calling hmac_module_init+0x0/0x12 @ 1
initcall hmac_module_init+0x0/0x12 returned 0 after 4 usecs
calling md5_mod_init+0x0/0x12 @ 1
initcall md5_mod_init+0x0/0x12 returned 0 after 185 usecs
calling rmd320_mod_init+0x0/0x12 @ 1
initcall rmd320_mod_init+0x0/0x12 returned 0 after 196 usecs
calling sha1_generic_mod_init+0x0/0x12 @ 1
initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 183 usecs
calling sha256_generic_mod_init+0x0/0x3f @ 1
initcall sha256_generic_mod_init+0x0/0x3f returned 0 after 361 usecs
calling sha512_generic_mod_init+0x0/0x3f @ 1
initcall sha512_generic_mod_init+0x0/0x3f returned 0 after 429 usecs
calling wp512_mod_init+0x0/0x64 @ 1
initcall wp512_mod_init+0x0/0x64 returned 0 after 610 usecs
calling tgr192_mod_init+0x0/0x65 @ 1
initcall tgr192_mod_init+0x0/0x65 returned 0 after 536 usecs
calling crypto_ecb_module_init+0x0/0x12 @ 1
initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 20 usecs
calling crypto_cbc_module_init+0x0/0x12 @ 1
initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 4 usecs
calling crypto_pcbc_module_init+0x0/0x12 @ 1
initcall crypto_pcbc_module_init+0x0/0x12 returned 0 after 4 usecs
calling crypto_cts_module_init+0x0/0x12 @ 1
initcall crypto_cts_module_init+0x0/0x12 returned 0 after 4 usecs
calling crypto_ctr_module_init+0x0/0x3e @ 1
initcall crypto_ctr_module_init+0x0/0x3e returned 0 after 6 usecs
calling crypto_gcm_module_init+0x0/0xe3 @ 1
initcall crypto_gcm_module_init+0x0/0xe3 returned 0 after 14 usecs
calling crypto_ccm_module_init+0x0/0x60 @ 1
initcall crypto_ccm_module_init+0x0/0x60 returned 0 after 9 usecs
calling cryptd_init+0x0/0x2e @ 1
initcall cryptd_init+0x0/0x2e returned 0 after 9 usecs
calling fcrypt_mod_init+0x0/0x12 @ 1
alg: No test for fcrypt (fcrypt-generic)
initcall fcrypt_mod_init+0x0/0x12 returned 0 after 3789 usecs
calling blowfish_mod_init+0x0/0x12 @ 1
initcall blowfish_mod_init+0x0/0x12 returned 0 after 663 usecs
calling aes_init+0x0/0x12 @ 1
initcall aes_init+0x0/0x12 returned 0 after 229 usecs
calling camellia_init+0x0/0x12 @ 1
initcall camellia_init+0x0/0x12 returned 0 after 243 usecs
calling arc4_init+0x0/0x12 @ 1
initcall arc4_init+0x0/0x12 returned 0 after 191 usecs
calling tea_mod_init+0x0/0x64 @ 1
initcall tea_mod_init+0x0/0x64 returned 0 after 687 usecs
calling seed_init+0x0/0x12 @ 1
initcall seed_init+0x0/0x12 returned 0 after 209 usecs
calling salsa20_generic_mod_init+0x0/0x12 @ 1
initcall salsa20_generic_mod_init+0x0/0x12 returned 0 after 116 usecs
calling deflate_mod_init+0x0/0x12 @ 1
initcall deflate_mod_init+0x0/0x12 returned 0 after 657 usecs
calling crc32c_mod_init+0x0/0x12 @ 1
initcall crc32c_mod_init+0x0/0x12 returned 0 after 322 usecs
calling crypto_authenc_module_init+0x0/0x12 @ 1
initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 21 usecs
calling krng_mod_init+0x0/0x12 @ 1
alg: No test for stdrng (krng)
initcall krng_mod_init+0x0/0x12 returned 0 after 2968 usecs
calling ghash_mod_init+0x0/0x12 @ 1
alg: No test for ghash (ghash-generic)
initcall ghash_mod_init+0x0/0x12 returned 0 after 3654 usecs
calling proc_genhd_init+0x0/0x3c @ 1
initcall proc_genhd_init+0x0/0x3c returned 0 after 54 usecs
calling noop_init+0x0/0x14 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x14 returned 0 after 2684 usecs
calling as_init+0x0/0x14 @ 1
io scheduler anticipatory registered (default)
initcall as_init+0x0/0x14 returned 0 after 4197 usecs
calling deadline_init+0x0/0x14 @ 1
io scheduler deadline registered
initcall deadline_init+0x0/0x14 returned 0 after 3014 usecs
calling dynamic_debug_init+0x0/0x12c @ 1
initcall dynamic_debug_init+0x0/0x12c returned 0 after 1011 usecs
calling pci_init+0x0/0x3a @ 1
pci 0000:04:00.0: Boot video device
initcall pci_init+0x0/0x3a returned 0 after 3605 usecs
calling pci_proc_init+0x0/0x6a @ 1
initcall pci_proc_init+0x0/0x6a returned 0 after 627 usecs
calling pcie_portdrv_init+0x0/0x4c @ 1
pcieport-driver 0000:00:01.0: setting latency timer to 64
PM: Adding info for pci_express:0000:00:01.0:pcie01
PM: Adding info for pci_express:0000:00:01.0:pcie08
pcieport-driver 0000:00:1c.0: setting latency timer to 64
PM: Adding info for pci_express:0000:00:1c.0:pcie01
PM: Adding info for pci_express:0000:00:1c.0:pcie04
PM: Adding info for pci_express:0000:00:1c.0:pcie08
pcieport-driver 0000:00:1c.3: setting latency timer to 64
PM: Adding info for pci_express:0000:00:1c.3:pcie01
PM: Adding info for pci_express:0000:00:1c.3:pcie08
initcall pcie_portdrv_init+0x0/0x4c returned 0 after 51719 usecs
calling aer_service_init+0x0/0xb @ 1
initcall aer_service_init+0x0/0xb returned -6 after 0 usecs
initcall aer_service_init+0x0/0xb returned with error code -6
calling aer_inject_init+0x0/0x12 @ 1
PM: Adding info for No Bus:aer_inject
initcall aer_inject_init+0x0/0x12 returned 0 after 3854 usecs
calling genericbl_init+0x0/0x12 @ 1
initcall genericbl_init+0x0/0x12 returned 0 after 276 usecs
calling progearbl_init+0x0/0x55 @ 1
PM: Adding info for platform:progear-bl
ALI M7101 PMU not found.
initcall progearbl_init+0x0/0x55 returned 0 after 6756 usecs
calling display_class_init+0x0/0x7e @ 1
initcall display_class_init+0x0/0x7e returned 0 after 279 usecs
calling acpi_reserve_resources+0x0/0xeb @ 1
initcall acpi_reserve_resources+0x0/0xeb returned 0 after 44 usecs
calling irqrouter_init_sysfs+0x0/0x38 @ 1
initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 455 usecs
calling acpi_button_init+0x0/0x56 @ 1
PM: Adding info for No Bus:input0
input: Power Button as /class/input/input0
ACPI: Power Button [PWRB]
PM: Adding info for No Bus:input1
input: Power Button as /class/input/input1
ACPI: Power Button [PWRF]
initcall acpi_button_init+0x0/0x56 returned 0 after 20714 usecs
calling acpi_fan_init+0x0/0x56 @ 1
initcall acpi_fan_init+0x0/0x56 returned 0 after 315 usecs
calling acpi_smb_hc_init+0x0/0x18 @ 1
initcall acpi_smb_hc_init+0x0/0x18 returned 0 after 345 usecs
calling acpi_sbs_init+0x0/0x4f @ 1
initcall acpi_sbs_init+0x0/0x4f returned 0 after 341 usecs
calling xenfs_init+0x0/0x2d @ 1
XENFS: not registering filesystem on non-xen platform
initcall xenfs_init+0x0/0x2d returned 0 after 4788 usecs
calling hypervisor_subsys_init+0x0/0x25 @ 1
initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs
calling hyper_sysfs_init+0x0/0xfb @ 1
initcall hyper_sysfs_init+0x0/0xfb returned -19 after 0 usecs
calling regulator_virtual_consumer_init+0x0/0x12 @ 1
initcall regulator_virtual_consumer_init+0x0/0x12 returned 0 after 276 usecs
calling rand_initialize+0x0/0x31 @ 1
initcall rand_initialize+0x0/0x31 returned 0 after 28 usecs
calling tty_init+0x0/0xf5 @ 1
PM: Adding info for No Bus:tty
PM: Adding info for No Bus:console
PM: Adding info for No Bus:tty0
PM: Adding info for No Bus:vcs
PM: Adding info for No Bus:vcsa
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Adding info for No Bus:tty1
PM: Adding info for No Bus:tty2
PM: Adding info for No Bus:tty3
PM: Adding info for No Bus:tty4
PM: Adding info for No Bus:tty5
PM: Adding info for No Bus:tty6
PM: Adding info for No Bus:tty7
PM: Adding info for No Bus:tty8
PM: Adding info for No Bus:tty9
PM: Adding info for No Bus:tty10
PM: Adding info for No Bus:tty11
PM: Adding info for No Bus:tty12
PM: Adding info for No Bus:tty13
PM: Adding info for No Bus:tty14
PM: Adding info for No Bus:tty15
PM: Adding info for No Bus:tty16
PM: Adding info for No Bus:tty17
PM: Adding info for No Bus:tty18
PM: Adding info for No Bus:tty19
PM: Adding info for No Bus:tty20
PM: Adding info for No Bus:tty21
PM: Adding info for No Bus:tty22
PM: Adding info for No Bus:tty23
PM: Adding info for No Bus:tty24
PM: Adding info for No Bus:tty25
PM: Adding info for No Bus:tty26
PM: Adding info for No Bus:tty27
PM: Adding info for No Bus:tty28
PM: Adding info for No Bus:tty29
PM: Adding info for No Bus:tty30
PM: Adding info for No Bus:tty31
PM: Adding info for No Bus:tty32
PM: Adding info for No Bus:tty33
PM: Adding info for No Bus:tty34
PM: Adding info for No Bus:tty35
PM: Adding info for No Bus:tty36
PM: Adding info for No Bus:tty37
PM: Adding info for No Bus:tty38
PM: Adding info for No Bus:tty39
PM: Adding info for No Bus:tty40
PM: Adding info for No Bus:tty41
PM: Adding info for No Bus:tty42
PM: Adding info for No Bus:tty43
PM: Adding info for No Bus:tty44
PM: Adding info for No Bus:tty45
PM: Adding info for No Bus:tty46
PM: Adding info for No Bus:tty47
PM: Adding info for No Bus:tty48
PM: Adding info for No Bus:tty49
PM: Adding info for No Bus:tty50
PM: Adding info for No Bus:tty51
PM: Adding info for No Bus:tty52
PM: Adding info for No Bus:tty53
PM: Adding info for No Bus:tty54
PM: Adding info for No Bus:tty55
PM: Adding info for No Bus:tty56
PM: Adding info for No Bus:tty57
PM: Adding info for No Bus:tty58
PM: Adding info for No Bus:tty59
PM: Adding info for No Bus:tty60
PM: Adding info for No Bus:tty61
PM: Adding info for No Bus:tty62
PM: Adding info for No Bus:tty63
initcall tty_init+0x0/0xf5 returned 0 after 238267 usecs
calling pty_init+0x0/0xd @ 1
PM: Adding info for No Bus:ptmx
initcall pty_init+0x0/0xd returned 0 after 3386 usecs
calling sysrq_init+0x0/0x25 @ 1
initcall sysrq_init+0x0/0x25 returned 0 after 42 usecs
calling xen_init+0x0/0x93 @ 1
initcall xen_init+0x0/0x93 returned -19 after 0 usecs
calling init+0x0/0x12 @ 1
initcall init+0x0/0x12 returned 0 after 254 usecs
calling raw_init+0x0/0xe5 @ 1
PM: Adding info for No Bus:rawctl
initcall raw_init+0x0/0xe5 returned 0 after 3749 usecs
calling applicom_init+0x0/0x4c8 @ 1
Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
ac.o: No PCI boards found.
ac.o: For an ISA board you must supply memory and irq parameters.
initcall applicom_init+0x0/0x4c8 returned -6 after 16570 usecs
initcall applicom_init+0x0/0x4c8 returned with error code -6
calling hpet_init+0x0/0x6a @ 1
PM: Adding info for No Bus:hpet
initcall hpet_init+0x0/0x6a returned 0 after 3587 usecs
calling mwave_init+0x0/0x1dd @ 1
smapi::smapi_init, ERROR invalid usSmapiID
mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
mwave: mwavedd::mwave_init: Error: Failed to initialize board data
mwave: mwavedd::mwave_init: Error: Failed to initialize
initcall mwave_init+0x0/0x1dd returned -5 after 22723 usecs
initcall mwave_init+0x0/0x1dd returned with error code -5
calling ipmi_init_msghandler_mod+0x0/0xd @ 1
ipmi message handler version 39.2
initcall ipmi_init_msghandler_mod+0x0/0xd returned 0 after 3484 usecs
calling hangcheck_init+0x0/0x9b @ 1
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
initcall hangcheck_init+0x0/0x9b returned 0 after 10503 usecs
calling init_tis+0x0/0x8e @ 1
initcall init_tis+0x0/0x8e returned 0 after 279 usecs
calling init_atmel+0x0/0x182 @ 1
initcall init_atmel+0x0/0x182 returned -19 after 595 usecs
calling serial8250_init+0x0/0x143 @ 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PM: Adding info for platform:serial8250
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PM: Adding info for No Bus:ttyS0
PM: Adding info for No Bus:ttyS1
PM: Adding info for No Bus:ttyS2
PM: Adding info for No Bus:ttyS3
initcall serial8250_init+0x0/0x143 returned 0 after 28157 usecs
calling serial8250_pnp_init+0x0/0x12 @ 1
PM: Removing info for No Bus:ttyS0
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PM: Adding info for No Bus:ttyS0
initcall serial8250_pnp_init+0x0/0x12 returned 0 after 12094 usecs
calling serial8250_pci_init+0x0/0x1b @ 1
initcall serial8250_pci_init+0x0/0x1b returned 0 after 330 usecs
calling jsm_init_module+0x0/0x45 @ 1
initcall jsm_init_module+0x0/0x45 returned 0 after 389 usecs
calling floppy_init+0x0/0x5c4 @ 1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PM: Adding info for platform:floppy.0
PM: Adding info for No Bus:fd0
PM: Adding info for No Bus:2:0
initcall floppy_init+0x0/0x5c4 returned 0 after 34334 usecs
calling cpqarray_init+0x0/0x6b @ 1
Compaq SMART2 Driver (v 2.6.0)
initcall cpqarray_init+0x0/0x6b returned -19 after 3496 usecs
calling cciss_init+0x0/0x9e @ 1
HP CISS Driver (v 3.6.20)
initcall cciss_init+0x0/0x9e returned 0 after 3123 usecs
calling DAC960_init_module+0x0/0x4d @ 1
PM: Adding info for No Bus:dac960_gam
initcall DAC960_init_module+0x0/0x4d returned 0 after 4192 usecs
calling ub_init+0x0/0x8e @ 1
usbcore: registered new interface driver ub
initcall ub_init+0x0/0x8e returned 0 after 4329 usecs
calling xlblk_init+0x0/0x7a @ 1
initcall xlblk_init+0x0/0x7a returned -19 after 0 usecs
calling ibmasm_init+0x0/0x64 @ 1
ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
initcall ibmasm_init+0x0/0x64 returned 0 after 5703 usecs
calling phantom_init+0x0/0x10b @ 1
Phantom Linux Driver, version n0.9.8, init OK
initcall phantom_init+0x0/0x10b returned 0 after 4737 usecs
calling enclosure_init+0x0/0x19 @ 1
initcall enclosure_init+0x0/0x19 returned 0 after 247 usecs
calling init_kgdbts+0x0/0x16 @ 1
initcall init_kgdbts+0x0/0x16 returned 0 after 0 usecs
calling ilo_init+0x0/0x95 @ 1
initcall ilo_init+0x0/0x95 returned 0 after 625 usecs
calling mac_hid_init+0x0/0xb @ 1
PM: Adding info for No Bus:input2
input: Macintosh mouse button emulation as /class/input/input2
initcall mac_hid_init+0x0/0xb returned 0 after 9274 usecs
calling scsi_tgt_init+0x0/0x86 @ 1
PM: Adding info for No Bus:tgt
initcall scsi_tgt_init+0x0/0x86 returned 0 after 3404 usecs
calling raid_init+0x0/0x12 @ 1
initcall raid_init+0x0/0x12 returned 0 after 259 usecs
calling spi_transport_init+0x0/0x79 @ 1
initcall spi_transport_init+0x0/0x79 returned 0 after 553 usecs
calling fc_transport_init+0x0/0x4c @ 1
initcall fc_transport_init+0x0/0x4c returned 0 after 1026 usecs
calling iscsi_transport_init+0x0/0x14f @ 1
Loading iSCSI transport class v2.0-870.
initcall iscsi_transport_init+0x0/0x14f returned 0 after 5164 usecs
calling sas_transport_init+0x0/0xcc @ 1
initcall sas_transport_init+0x0/0xcc returned 0 after 1494 usecs
calling sas_class_init+0x0/0x31 @ 1
initcall sas_class_init+0x0/0x31 returned 0 after 22 usecs
calling scsi_dh_init+0x0/0x3f @ 1
initcall scsi_dh_init+0x0/0x3f returned 0 after 1 usecs
calling libfc_init+0x0/0x73 @ 1
initcall libfc_init+0x0/0x73 returned 0 after 88 usecs
calling fnic_init_module+0x0/0x1e9 @ 1
fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121
initcall fnic_init_module+0x0/0x1e9 returned 0 after 4429 usecs
calling iscsi_sw_tcp_init+0x0/0x42 @ 1
PM: Adding info for No Bus:tcp
iscsi: registered transport (tcp)
initcall iscsi_sw_tcp_init+0x0/0x42 returned 0 after 6390 usecs
calling BusLogic_init+0x0/0x5df @ 1
initcall BusLogic_init+0x0/0x5df returned 0 after 178 usecs
calling arcmsr_module_init+0x0/0x20 @ 1
initcall arcmsr_module_init+0x0/0x20 returned 0 after 293 usecs
calling ahc_linux_init+0x0/0x65 @ 1
initcall ahc_linux_init+0x0/0x65 returned 0 after 424 usecs
calling ahd_linux_init+0x0/0x80 @ 1
initcall ahd_linux_init+0x0/0x80 returned 0 after 386 usecs
calling aac_init+0x0/0x73 @ 1
Adaptec aacraid driver 1.1-5[2461]-ms
initcall aac_init+0x0/0x73 returned 0 after 3826 usecs
calling ips_module_init+0x0/0x67 @ 1
initcall ips_module_init+0x0/0x67 returned -19 after 590 usecs
calling init_this_scsi_driver+0x0/0xe3 @ 1
scsi: <fdomain> Detection failed (no card)
initcall init_this_scsi_driver+0x0/0xe3 returned -19 after 4061 usecs
calling qla1280_init+0x0/0x1b @ 1
initcall qla1280_init+0x0/0x1b returned 0 after 287 usecs
calling lpfc_init+0x0/0xcd @ 1
Emulex LightPulse Fibre Channel SCSI driver 8.3.4
Copyright(c) 2004-2009 Emulex. All rights reserved.
initcall lpfc_init+0x0/0xcd returned 0 after 9478 usecs
calling init_this_scsi_driver+0x0/0xe3 @ 1
initcall init_this_scsi_driver+0x0/0xe3 returned -19 after 37 usecs
calling dc395x_module_init+0x0/0x1b @ 1
initcall dc395x_module_init+0x0/0x1b returned 0 after 285 usecs
calling megaraid_init+0x0/0xbc @ 1
initcall megaraid_init+0x0/0xbc returned 0 after 352 usecs
calling megasas_init+0x0/0x16e @ 1
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
initcall megasas_init+0x0/0x16e returned 0 after 4893 usecs
calling _scsih_init+0x0/0x119 @ 1
mpt2sas version 02.100.03.00 loaded
PM: Adding info for No Bus:mpt2ctl
initcall _scsih_init+0x0/0x119 returned 0 after 7225 usecs
calling initio_init_driver+0x0/0x1b @ 1
initcall initio_init_driver+0x0/0x1b returned 0 after 308 usecs
calling inia100_init+0x0/0x1b @ 1
initcall inia100_init+0x0/0x1b returned 0 after 310 usecs
calling tw_init+0x0/0x30 @ 1
3ware Storage Controller device driver for Linux v1.26.02.002.
initcall tw_init+0x0/0x30 returned 0 after 5860 usecs
calling twa_init+0x0/0x30 @ 1
3ware 9000 Storage Controller device driver for Linux v2.26.02.012.
initcall twa_init+0x0/0x30 returned 0 after 6338 usecs
calling stex_init+0x0/0x30 @ 1
stex: Promise SuperTrak EX Driver version: 4.6.0000.3
initcall stex_init+0x0/0x30 returned 0 after 5096 usecs
calling pmcraid_init+0x0/0x13b @ 1
initcall pmcraid_init+0x0/0x13b returned 0 after 671 usecs
calling init_sd+0x0/0x161 @ 1
initcall init_sd+0x0/0x161 returned 0 after 728 usecs
calling init_sr+0x0/0x46 @ 1
initcall init_sr+0x0/0x46 returned 0 after 275 usecs
calling init_sg+0x0/0x125 @ 1
initcall init_sg+0x0/0x125 returned 0 after 461 usecs
calling ahci_init+0x0/0x1b @ 1
initcall ahci_init+0x0/0x1b returned 0 after 390 usecs
calling k2_sata_init+0x0/0x1b @ 1
initcall k2_sata_init+0x0/0x1b returned 0 after 305 usecs
calling piix_init+0x0/0x29 @ 1
ata_piix 0000:00:1f.1: version 2.13
IOAPIC[0]: Set routing entry (2-22 -> 0x59 -> IRQ 22 Mode:1 Active:1)
ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
PM: Adding info for No Bus:host0
PM: Adding info for No Bus:host0
scsi1 : ata_piix
PM: Adding info for No Bus:host1
PM: Adding info for No Bus:host1
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
IOAPIC[0]: Set routing entry (2-23 -> 0x61 -> IRQ 23 Mode:1 Active:1)
ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
calling 1_async_port_probe+0x0/0xbb @ 827
calling 2_async_port_probe+0x0/0xbb @ 828
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
PM: Adding info for No Bus:host2
PM: Adding info for No Bus:host2
scsi3 : ata_piix
PM: Adding info for No Bus:host3
PM: Adding info for No Bus:host3
ata3: SATA max UDMA/133 cmd 0x9800 ctl 0x9400 bmdma 0x8400 irq 23
ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8800 bmdma 0x8408 irq 23
calling 3_async_port_probe+0x0/0xbb @ 833
calling 4_async_port_probe+0x0/0xbb @ 834
initcall piix_init+0x0/0x29 returned 0 after 175181 usecs
calling pdc_ata_init+0x0/0x1b @ 1
initcall pdc_ata_init+0x0/0x1b returned 0 after 326 usecs
calling sil24_init+0x0/0x1b @ 1
initcall sil24_init+0x0/0x1b returned 0 after 317 usecs
calling nv_init+0x0/0x1b @ 1
initcall nv_init+0x0/0x1b returned 0 after 369 usecs
calling amd_init+0x0/0x1b @ 1
initcall amd_init+0x0/0x1b returned 0 after 311 usecs
calling atp867x_init+0x0/0x1b @ 1
initcall atp867x_init+0x0/0x1b returned 0 after 309 usecs
calling cmd64x_init+0x0/0x1b @ 1
initcall cmd64x_init+0x0/0x1b returned 0 after 316 usecs
calling cs5520_init+0x0/0x1b @ 1
initcall cs5520_init+0x0/0x1b returned 0 after 307 usecs
calling it8213_init+0x0/0x1b @ 1
initcall it8213_init+0x0/0x1b returned 0 after 309 usecs
calling ninja32_init+0x0/0x1b @ 1
initcall ninja32_init+0x0/0x1b returned 0 after 308 usecs
calling ns87415_init+0x0/0x1b @ 1
initcall ns87415_init+0x0/0x1b returned 0 after 304 usecs
calling marvell_init+0x0/0x1b @ 1
initcall marvell_init+0x0/0x1b returned 0 after 368 usecs
calling oldpiix_init+0x0/0x1b @ 1
ata1.00: unsupported CDB len
async_waiting @ 828
initcall oldpiix_init+0x0/0x1b returned 0 after 16153 usecs
calling pdc2027x_init+0x0/0x1b @ 1
initcall pdc2027x_init+0x0/0x1b returned 0 after 305 usecs
calling radisys_init+0x0/0x1b @ 1
initcall radisys_init+0x0/0x1b returned 0 after 358 usecs
calling sil680_init+0x0/0x1b @ 1
initcall sil680_init+0x0/0x1b returned 0 after 313 usecs
calling via_init+0x0/0x1b @ 1
async_waiting @ 834
initcall via_init+0x0/0x1b returned 0 after 13206 usecs
calling spi_gpio_init+0x0/0x19 @ 1
initcall spi_gpio_init+0x0/0x19 returned -19 after 557 usecs
calling e1000_init_module+0x0/0x6b @ 1
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
initcall e1000_init_module+0x0/0x6b returned 0 after 9562 usecs
calling ipg_init_module+0x0/0x1b @ 1
initcall ipg_init_module+0x0/0x1b returned 0 after 312 usecs
calling atl1c_init_module+0x0/0x1b @ 1
ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
initcall atl1c_init_module+0x0/0x1b returned 0 after 10278 usecs
calling enic_init_module+0x0/0x37 @ 1
enic: Cisco 10G Ethernet Driver, ver 1.1.0.100
initcall enic_init_module+0x0/0x37 returned 0 after 4660 usecs
calling ne2k_pci_init+0x0/0x1b @ 1
initcall ne2k_pci_init+0x0/0x1b returned 0 after 542 usecs
calling e100_init_module+0x0/0x5d @ 1
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall e100_init_module+0x0/0x5d returned 0 after 9302 usecs
calling sis900_init_module+0x0/0x1b @ 1
initcall sis900_init_module+0x0/0x1b returned 0 after 387 usecs
calling yellowfin_init+0x0/0x1b @ 1
ata3.00: configured for UDMA/133
async_waiting @ 833
initcall yellowfin_init+0x0/0x1b returned 0 after 5340 usecs
calling ns83820_init+0x0/0x29 @ 1
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
initcall ns83820_init+0x0/0x29 returned 0 after 5818 usecs
calling fealnx_init+0x0/0x1b @ 1
initcall fealnx_init+0x0/0x1b returned 0 after 308 usecs
calling tg3_init+0x0/0x1b @ 1
initcall tg3_init+0x0/0x1b returned 0 after 309 usecs
calling skge_init_module+0x0/0x1b @ 1
initcall skge_init_module+0x0/0x1b returned 0 after 313 usecs
calling sky2_init_module+0x0/0x29 @ 1
sky2 driver version 1.25
sky2 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 EC chip revision 2
PM: Adding info for No Bus:eth0
sky2 eth0: addr 00:15:f2:e6:8e:6b
initcall sky2_init_module+0x0/0x29 returned 0 after 23877 usecs
calling cicada_init+0x0/0x3c @ 1
initcall cicada_init+0x0/0x3c returned 0 after 552 usecs
calling lxt_init+0x0/0x3c @ 1
initcall lxt_init+0x0/0x3c returned 0 after 562 usecs
calling broadcom_init+0x0/0x143 @ 1
initcall broadcom_init+0x0/0x143 returned 0 after 2810 usecs
calling ip175c_init+0x0/0x12 @ 1
initcall ip175c_init+0x0/0x12 returned 0 after 278 usecs
calling realtek_init+0x0/0x12 @ 1
initcall realtek_init+0x0/0x12 returned 0 after 273 usecs
calling et1011c_init+0x0/0x12 @ 1
initcall et1011c_init+0x0/0x12 returned 0 after 270 usecs
calling fixed_mdio_bus_init+0x0/0xf7 @ 1
PM: Adding info for platform:Fixed MDIO bus.0
PM: Adding info for No Bus:0
Fixed MDIO Bus: probed
initcall fixed_mdio_bus_init+0x0/0xf7 returned 0 after 9796 usecs
calling sundance_init+0x0/0x1b @ 1
initcall sundance_init+0x0/0x1b returned 0 after 314 usecs
calling hamachi_init+0x0/0x1b @ 1
initcall hamachi_init+0x0/0x1b returned 0 after 300 usecs
calling net_olddevs_init+0x0/0x2f @ 1
initcall net_olddevs_init+0x0/0x2f returned 0 after 463 usecs
calling hp100_module_init+0x0/0x1b @ 1
initcall hp100_module_init+0x0/0x1b returned 0 after 376 usecs
calling init_nic+0x0/0x1b @ 1
initcall init_nic+0x0/0x1b returned 0 after 305 usecs
calling ql3xxx_init_module+0x0/0x1b @ 1
initcall ql3xxx_init_module+0x0/0x1b returned 0 after 304 usecs
calling qlge_init_module+0x0/0x1b @ 1
initcall qlge_init_module+0x0/0x1b returned 0 after 301 usecs
calling ppp_init+0x0/0xf0 @ 1
PPP generic driver version 2.4.2
PM: Adding info for No Bus:ppp
initcall ppp_init+0x0/0xf0 returned 0 after 6664 usecs
calling ppp_sync_init+0x0/0x36 @ 1
initcall ppp_sync_init+0x0/0x36 returned 0 after 1 usecs
calling ppp_mppe_init+0x0/0x110 @ 1
PPP MPPE Compression module registered
initcall ppp_mppe_init+0x0/0x110 returned 0 after 4463 usecs
calling pppox_init+0x0/0x12 @ 1
NET: Registered protocol family 24
initcall pppox_init+0x0/0x12 returned 0 after 3182 usecs
calling pppoe_init+0x0/0x94 @ 1
initcall pppoe_init+0x0/0x94 returned 0 after 94 usecs
calling slip_init+0x0/0xc1 @ 1
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
initcall slip_init+0x0/0xc1 returned 0 after 17263 usecs
calling netif_init+0x0/0x52 @ 1
initcall netif_init+0x0/0x52 returned -19 after 0 usecs
calling rtl8139_init_module+0x0/0x1b @ 1
initcall rtl8139_init_module+0x0/0x1b returned 0 after 306 usecs
calling tun_init+0x0/0x93 @ 1
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@...lcomm.com>
PM: Adding info for No Bus:tun
initcall tun_init+0x0/0x93 returned 0 after 11886 usecs
calling rio_init+0x0/0x1b @ 1
initcall rio_init+0x0/0x1b returned 0 after 306 usecs
calling amd8111e_init+0x0/0x1b @ 1
initcall amd8111e_init+0x0/0x1b returned 0 after 310 usecs
calling myri10ge_init_module+0x0/0x74 @ 1
myri10ge: Version 1.5.0-1.432
initcall myri10ge_init_module+0x0/0x74 returned 0 after 3128 usecs
calling mlx4_init+0x0/0xa2 @ 1
initcall mlx4_init+0x0/0xa2 returned 0 after 464 usecs
calling mlx4_en_init+0x0/0x12 @ 1
initcall mlx4_en_init+0x0/0x12 returned 0 after 30 usecs
calling enc28j60_init+0x0/0x23 @ 1
initcall enc28j60_init+0x0/0x23 returned 0 after 251 usecs
calling tms_pci_init+0x0/0x1b @ 1
initcall tms_pci_init+0x0/0x1b returned 0 after 308 usecs
calling catc_init+0x0/0x39 @ 1
usbcore: registered new interface driver catc
catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
initcall catc_init+0x0/0x39 returned 0 after 9135 usecs
calling kaweth_init+0x0/0x1b @ 1
usbcore: registered new interface driver kaweth
initcall kaweth_init+0x0/0x1b returned 0 after 4596 usecs
calling usb_rtl8150_init+0x0/0x29 @ 1
rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
usbcore: registered new interface driver rtl8150
initcall usb_rtl8150_init+0x0/0x29 returned 0 after 10226 usecs
calling hso_init+0x0/0x1a7 @ 1
hso: drivers/net/usb/hso.c: 1.2 Option Wireless
usbcore: registered new interface driver hso
initcall hso_init+0x0/0x1a7 returned 0 after 8702 usecs
calling cdc_init+0x0/0x1b @ 1
usbcore: registered new interface driver cdc_ether
initcall cdc_init+0x0/0x1b returned 0 after 4845 usecs
calling smsc95xx_init+0x0/0x1b @ 1
usbcore: registered new interface driver smsc95xx
initcall smsc95xx_init+0x0/0x1b returned 0 after 4828 usecs
calling net1080_init+0x0/0x1b @ 1
usbcore: registered new interface driver net1080
initcall net1080_init+0x0/0x1b returned 0 after 4693 usecs
calling plusb_init+0x0/0x1b @ 1
usbcore: registered new interface driver plusb
initcall plusb_init+0x0/0x1b returned 0 after 4529 usecs
calling zaurus_init+0x0/0x1b @ 1
usbcore: registered new interface driver zaurus
initcall zaurus_init+0x0/0x1b returned 0 after 4587 usecs
calling mcs7830_init+0x0/0x1b @ 1
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
initcall mcs7830_init+0x0/0x1b returned 0 after 6362 usecs
calling usbnet_init+0x0/0x2b @ 1
initcall usbnet_init+0x0/0x2b returned 0 after 7 usecs
calling w840_init+0x0/0x29 @ 1
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@...ld.com>
http://www.scyld.com/network/drivers.html
initcall w840_init+0x0/0x29 returned 0 after 11127 usecs
calling tulip_init+0x0/0x33 @ 1
initcall tulip_init+0x0/0x33 returned 0 after 307 usecs
calling init_netconsole+0x0/0x165 @ 1
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x165 returned 0 after 5916 usecs
calling i2o_iop_init+0x0/0x49 @ 1
I2O subsystem v1.325
i2o: max drivers = 8
initcall i2o_iop_init+0x0/0x49 returned 0 after 4977 usecs
calling i2o_block_init+0x0/0x121 @ 1
I2O Block Device OSM v1.325
initcall i2o_block_init+0x0/0x121 returned 0 after 3257 usecs
calling i2o_scsi_init+0x0/0x44 @ 1
I2O SCSI Peripheral OSM v1.316
initcall i2o_scsi_init+0x0/0x44 returned 0 after 3117 usecs
calling fusion_init+0x0/0x13b @ 1
Fusion MPT base driver 3.04.12
Copyright (c) 1999-2008 LSI Corporation
initcall fusion_init+0x0/0x13b returned 0 after 6523 usecs
calling mptfc_init+0x0/0xf3 @ 1
Fusion MPT FC Host driver 3.04.12
initcall mptfc_init+0x0/0xf3 returned 0 after 3402 usecs
calling cdrom_init+0x0/0x8 @ 1
initcall cdrom_init+0x0/0x8 returned 0 after 0 usecs
calling uwb_subsys_init+0x0/0x51 @ 1
initcall uwb_subsys_init+0x0/0x51 returned 0 after 300 usecs
calling mon_init+0x0/0x116 @ 1
PM: Adding info for No Bus:usbmon0
initcall mon_init+0x0/0x116 returned 0 after 3924 usecs
calling ehci_hcd_init+0x0/0xbd @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
IOAPIC[0]: Set routing entry (2-20 -> 0x69 -> IRQ 20 Mode:1 Active:1)
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PM: Adding info for No Bus:usbmon1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd7cff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
PM: Adding info for usb:usb1
usb usb1: configuration #1 chosen from 1 choice
PM: Adding info for usb:1-0:1.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:ep_00
initcall ehci_hcd_init+0x0/0xbd returned 0 after 92834 usecs
calling isp116x_init+0x0/0x3e @ 1
116x: driver isp116x-hcd, 03 Nov 2005
initcall isp116x_init+0x0/0x3e returned 0 after 3722 usecs
calling ohci_hcd_mod_init+0x0/0x8e @ 1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
initcall ohci_hcd_mod_init+0x0/0x8e returned 0 after 5199 usecs
calling uhci_hcd_init+0x0/0xbe @ 1
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PM: Adding info for No Bus:usbmon2
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007000
PM: Adding info for usb:usb2
usb usb2: configuration #1 chosen from 1 choice
PM: Adding info for usb:2-0:1.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:ep_00
IOAPIC[0]: Set routing entry (2-17 -> 0x71 -> IRQ 17 Mode:1 Active:1)
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PM: Adding info for No Bus:usbmon3
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00007400
PM: Adding info for usb:usb3
usb usb3: configuration #1 chosen from 1 choice
PM: Adding info for usb:3-0:1.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:ep_00
IOAPIC[0]: Set routing entry (2-18 -> 0x79 -> IRQ 18 Mode:1 Active:1)
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PM: Adding info for No Bus:usbmon4
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007800
PM: Adding info for usb:usb4
usb usb4: configuration #1 chosen from 1 choice
PM: Adding info for usb:4-0:1.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:ep_00
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
PM: Adding info for No Bus:usbmon5
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00008000
PM: Adding info for usb:usb5
usb usb5: configuration #1 chosen from 1 choice
PM: Adding info for usb:5-0:1.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:ep_00
initcall uhci_hcd_init+0x0/0xbe returned 0 after 228120 usecs
calling isp1760_init+0x0/0x50 @ 1
initcall isp1760_init+0x0/0x50 returned 0 after 621 usecs
calling c67x00_init+0x0/0x12 @ 1
initcall c67x00_init+0x0/0x12 returned 0 after 288 usecs
calling usb_usual_init+0x0/0x3f @ 1
usbcore: registered new interface driver libusual
initcall usb_usual_init+0x0/0x3f returned 0 after 4922 usecs
calling usb_mdc800_init+0x0/0x3a6 @ 1
usbcore: registered new interface driver mdc800
mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
initcall usb_mdc800_init+0x0/0x3a6 returned 0 after 11071 usecs
calling microtek_drv_init+0x0/0x1b @ 1
usbcore: registered new interface driver microtekX6
initcall microtek_drv_init+0x0/0x1b returned 0 after 4939 usecs
calling adu_init+0x0/0x96 @ 1
usbcore: registered new interface driver adutux
adutux adutux (see www.ontrak.net) v0.0.13
adutux is an experimental driver. Use at your own risk
initcall adu_init+0x0/0x96 returned 0 after 13431 usecs
calling appledisplay_init+0x0/0x59 @ 1
usbcore: registered new interface driver appledisplay
initcall appledisplay_init+0x0/0x59 returned 0 after 5277 usecs
calling cypress_init+0x0/0x3a @ 1
usbcore: registered new interface driver cypress_cy7c63
initcall cypress_init+0x0/0x3a returned 0 after 5276 usecs
calling emi62_init+0x0/0x38 @ 1
usbcore: registered new interface driver emi62 - firmware loader
initcall emi62_init+0x0/0x38 returned 0 after 6047 usecs
calling iowarrior_init+0x0/0x1b @ 1
usbcore: registered new interface driver iowarrior
initcall iowarrior_init+0x0/0x1b returned 0 after 4921 usecs
calling ld_usb_init+0x0/0x3a @ 1
usbcore: registered new interface driver ldusb
initcall ld_usb_init+0x0/0x3a returned 0 after 4581 usecs
calling lego_usb_tower_init+0x0/0x8b @ 1
usbcore: registered new interface driver legousbtower
legousbtower: v0.96:LEGO USB Tower Driver
initcall lego_usb_tower_init+0x0/0x8b returned 0 after 8982 usecs
calling usb_sevseg_init+0x0/0x3a @ 1
usbcore: registered new interface driver usbsevseg
initcall usb_sevseg_init+0x0/0x3a returned 0 after 4854 usecs
calling i8042_init+0x0/0xad @ 1
PNP: No PS/2 controller found. Probing ports directly.
PM: Adding info for platform:i8042
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
PM: Adding info for serio:serio0
PM: Adding info for serio:serio1
initcall i8042_init+0x0/0xad returned 0 after 26526 usecs
calling serio_raw_init+0x0/0x1b @ 1
initcall serio_raw_init+0x0/0x1b returned 0 after 438 usecs
calling mousedev_init+0x0/0x8d @ 1
PM: Adding info for No Bus:mice
PM: Adding info for No Bus:mouse0
PM: Adding info for No Bus:psaux
mice: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x8d returned 0 after 14489 usecs
calling atkbd_init+0x0/0x27 @ 1
initcall atkbd_init+0x0/0x27 returned 0 after 302 usecs
calling lkkbd_init+0x0/0x1b @ 1
initcall lkkbd_init+0x0/0x1b returned 0 after 422 usecs
calling nkbd_init+0x0/0x1b @ 1
initcall nkbd_init+0x0/0x1b returned 0 after 303 usecs
calling skbd_init+0x0/0x1b @ 1
initcall skbd_init+0x0/0x1b returned 0 after 321 usecs
calling bcm5974_init+0x0/0x1b @ 1
usbcore: registered new interface driver bcm5974
initcall bcm5974_init+0x0/0x1b returned 0 after 5215 usecs
calling sermouse_init+0x0/0x1b @ 1
initcall sermouse_init+0x0/0x1b returned 0 after 328 usecs
calling kbtab_init+0x0/0x38 @ 1
usbcore: registered new interface driver kbtab
kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
initcall kbtab_init+0x0/0x38 returned 0 after 9099 usecs
calling fujitsu_init+0x0/0x1b @ 1
initcall fujitsu_init+0x0/0x1b returned 0 after 649 usecs
calling mk712_init+0x0/0x1ea @ 1
mk712: device not present
initcall mk712_init+0x0/0x1ea returned -19 after 2486 usecs
calling powermate_init+0x0/0x1b @ 1
usbcore: registered new interface driver powermate
initcall powermate_init+0x0/0x1b returned 0 after 4845 usecs
calling rotary_encoder_init+0x0/0x12 @ 1
initcall rotary_encoder_init+0x0/0x12 returned 0 after 256 usecs
calling videodev_init+0x0/0x89 @ 1
Linux video capture interface: v2.00
initcall videodev_init+0x0/0x89 returned 0 after 3608 usecs
calling w1_init+0x0/0xa9 @ 1
Driver for 1-wire Dallas network protocol.
initcall w1_init+0x0/0xa9 returned 0 after 4728 usecs
calling matrox_w1_init+0x0/0x1b @ 1
initcall matrox_w1_init+0x0/0x1b returned 0 after 332 usecs
calling ds_init+0x0/0x3f @ 1
usbcore: registered new interface driver DS9490R
initcall ds_init+0x0/0x3f returned 0 after 4742 usecs
calling w1_gpio_init+0x0/0x19 @ 1
initcall w1_gpio_init+0x0/0x19 returned -19 after 512 usecs
calling w1_therm_init+0x0/0x32 @ 1
initcall w1_therm_init+0x0/0x32 returned 0 after 48 usecs
calling w1_ds2760_init+0x0/0x2c @ 1
1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
initcall w1_ds2760_init+0x0/0x2c returned 0 after 7509 usecs
calling ds2760_battery_init+0x0/0x12 @ 1
initcall ds2760_battery_init+0x0/0x12 returned 0 after 255 usecs
calling wdtpci_init+0x0/0x1b @ 1
initcall wdtpci_init+0x0/0x1b returned 0 after 305 usecs
calling advwdt_init+0x0/0x5f @ 1
WDT driver for Advantech single board computer initialising.
PM: Adding info for platform:advantechwdt
PM: Adding info for No Bus:watchdog
advantechwdt: initialized. timeout=60 sec (nowayout=0)
initcall advwdt_init+0x0/0x5f returned 0 after 18542 usecs
calling sc520_wdt_init+0x0/0xef @ 1
sc520_wdt: cannot register miscdev on minor=130 (err=-16)
initcall sc520_wdt_init+0x0/0xef returned -16 after 5234 usecs
initcall sc520_wdt_init+0x0/0xef returned with error code -16
calling it87_wdt_init+0x0/0x4c8 @ 1
IT87 WDT: no device
initcall it87_wdt_init+0x0/0x4c8 returned -19 after 1937 usecs
calling pc87413_init+0x0/0x91 @ 1
pc87413 WDT: Version 1.1 at io 0x2E
pc87413 WDT: cannot register miscdev on minor=130 (err=-16)
initcall pc87413_init+0x0/0x91 returned -16 after 8598 usecs
initcall pc87413_init+0x0/0x91 returned with error code -16
calling sbc60xxwdt_init+0x0/0x185 @ 1
sbc60xxwdt: I/O address 0x0443 already in use
initcall sbc60xxwdt_init+0x0/0x185 returned -5 after 4137 usecs
initcall sbc60xxwdt_init+0x0/0x185 returned with error code -5
calling cpu5wdt_init_module+0x0/0x10 @ 1
cpu5wdt: sorry, was my fault
cpu5wdt: misc_register failed
initcall cpu5wdt_init_module+0x0/0x10 returned -16 after 5459 usecs
initcall cpu5wdt_init_module+0x0/0x10 returned with error code -16
calling w83977f_wdt_init+0x0/0x149 @ 1
W83977F WDT: W83977F WDT driver, v1.00
W83977F WDT: cannot register miscdev on minor=130 (err=-16)
initcall w83977f_wdt_init+0x0/0x149 returned -16 after 8838 usecs
initcall w83977f_wdt_init+0x0/0x149 returned with error code -16
calling bpa10x_init+0x0/0x30 @ 1
Bluetooth: Digianswer Bluetooth USB driver ver 0.10
usbcore: registered new interface driver bpa10x
initcall bpa10x_init+0x0/0x30 returned 0 after 9203 usecs
calling bfusb_init+0x0/0x54 @ 1
Bluetooth: BlueFRITZ! USB driver ver 1.2
usbcore: registered new interface driver bfusb
initcall bfusb_init+0x0/0x54 returned 0 after 8194 usecs
calling init_ladder+0x0/0x12 @ 1
cpuidle: using governor ladder
initcall init_ladder+0x0/0x12 returned 0 after 2875 usecs
calling init_menu+0x0/0x12 @ 1
cpuidle: using governor menu
initcall init_menu+0x0/0x12 returned 0 after 2685 usecs
calling i7300_idle_init+0x0/0x17e @ 1
initcall i7300_idle_init+0x0/0x17e returned -19 after 187 usecs
calling memstick_init+0x0/0x85 @ 1
initcall memstick_init+0x0/0x85 returned 0 after 625 usecs
calling jmb38x_ms_init+0x0/0x1b @ 1
initcall jmb38x_ms_init+0x0/0x1b returned 0 after 374 usecs
calling timer_trig_init+0x0/0x12 @ 1
initcall timer_trig_init+0x0/0x12 returned 0 after 61 usecs
calling ib_core_init+0x0/0x44 @ 1
initcall ib_core_init+0x0/0x44 returned 0 after 241 usecs
calling ib_mad_init_module+0x0/0xcd @ 1
initcall ib_mad_init_module+0x0/0xcd returned 0 after 27 usecs
calling ib_sa_init+0x0/0x67 @ 1
initcall ib_sa_init+0x0/0x67 returned 0 after 89 usecs
calling ib_cm_init+0x0/0x157 @ 1
initcall ib_cm_init+0x0/0x157 returned 0 after 393 usecs
calling iw_cm_init+0x0/0x35 @ 1
initcall iw_cm_init+0x0/0x35 returned 0 after 89 usecs
calling ib_umad_init+0x0/0xcb @ 1
initcall ib_umad_init+0x0/0xcb returned 0 after 262 usecs
calling infinipath_init+0x0/0xc5 @ 1
initcall infinipath_init+0x0/0xc5 returned 0 after 480 usecs
calling efivars_init+0x0/0x239 @ 1
initcall efivars_init+0x0/0x239 returned -19 after 0 usecs
calling ibft_init+0x0/0x19b @ 1
No iBFT detected.
initcall ibft_init+0x0/0x19b returned 0 after 1826 usecs
calling hid_init+0x0/0x66 @ 1
initcall hid_init+0x0/0x66 returned 0 after 653 usecs
calling usb_kbd_init+0x0/0x38 @ 1
usbcore: registered new interface driver usbkbd
usbkbd: :USB HID Boot Protocol keyboard driver
initcall usb_kbd_init+0x0/0x38 returned 0 after 8905 usecs
calling usb_mouse_init+0x0/0x38 @ 1
usbcore: registered new interface driver usbmouse
usbmouse: v1.6:USB HID Boot Protocol mouse driver
initcall usb_mouse_init+0x0/0x38 returned 0 after 9289 usecs
calling init+0x0/0x12 @ 1
initcall init+0x0/0x12 returned 0 after 251 usecs
calling init_soundcore+0x0/0x95 @ 1
initcall init_soundcore+0x0/0x95 returned 0 after 280 usecs
calling alsa_sound_init+0x0/0xa4 @ 1
Advanced Linux Sound Architecture Driver Version 1.0.21.
initcall alsa_sound_init+0x0/0xa4 returned 0 after 5344 usecs
calling alsa_hwdep_init+0x0/0x64 @ 1
initcall alsa_hwdep_init+0x0/0x64 returned 0 after 62 usecs
calling alsa_timer_init+0x0/0xd7 @ 1
PM: Adding info for No Bus:timer
initcall alsa_timer_init+0x0/0xd7 returned 0 after 3472 usecs
calling snd_hrtimer_init+0x0/0x108 @ 1
initcall snd_hrtimer_init+0x0/0x108 returned 0 after 26 usecs
calling alsa_pcm_init+0x0/0x6c @ 1
initcall alsa_pcm_init+0x0/0x6c returned 0 after 43 usecs
calling snd_mem_init+0x0/0x2c @ 1
initcall snd_mem_init+0x0/0x2c returned 0 after 19 usecs
calling alsa_rawmidi_init+0x0/0xa4 @ 1
initcall alsa_rawmidi_init+0x0/0xa4 returned 0 after 13 usecs
calling alsa_mixer_oss_init+0x0/0x3d @ 1
initcall alsa_mixer_oss_init+0x0/0x3d returned 0 after 0 usecs
calling alsa_opl3_init+0x0/0x8 @ 1
initcall alsa_opl3_init+0x0/0x8 returned 0 after 0 usecs
calling alsa_mpu401_uart_init+0x0/0x8 @ 1
initcall alsa_mpu401_uart_init+0x0/0x8 returned 0 after 0 usecs
calling alsa_card_mpu401_init+0x0/0xc1 @ 1
initcall alsa_card_mpu401_init+0x0/0xc1 returned -19 after 1106 usecs
calling alsa_vx_core_init+0x0/0x8 @ 1
initcall alsa_vx_core_init+0x0/0x8 returned 0 after 0 usecs
calling alsa_sb_common_init+0x0/0x8 @ 1
initcall alsa_sb_common_init+0x0/0x8 returned 0 after 0 usecs
calling alsa_card_als4000_init+0x0/0x1b @ 1
initcall alsa_card_als4000_init+0x0/0x1b returned 0 after 402 usecs
calling alsa_card_atiixp_init+0x0/0x1b @ 1
initcall alsa_card_atiixp_init+0x0/0x1b returned 0 after 371 usecs
calling alsa_card_atiixp_init+0x0/0x1b @ 1
initcall alsa_card_atiixp_init+0x0/0x1b returned 0 after 371 usecs
calling alsa_card_azf3328_init+0x0/0x1b @ 1
initcall alsa_card_azf3328_init+0x0/0x1b returned 0 after 432 usecs
calling alsa_card_cmipci_init+0x0/0x1b @ 1
initcall alsa_card_cmipci_init+0x0/0x1b returned 0 after 367 usecs
calling alsa_card_cs4281_init+0x0/0x1b @ 1
initcall alsa_card_cs4281_init+0x0/0x1b returned 0 after 375 usecs
calling alsa_card_es1938_init+0x0/0x1b @ 1
initcall alsa_card_es1938_init+0x0/0x1b returned 0 after 376 usecs
calling alsa_card_es1968_init+0x0/0x1b @ 1
initcall alsa_card_es1968_init+0x0/0x1b returned 0 after 371 usecs
calling alsa_card_intel8x0m_init+0x0/0x1b @ 1
initcall alsa_card_intel8x0m_init+0x0/0x1b returned 0 after 368 usecs
calling alsa_card_rme96_init+0x0/0x1b @ 1
initcall alsa_card_rme96_init+0x0/0x1b returned 0 after 373 usecs
calling alsa_card_sonicvibes_init+0x0/0x1b @ 1
initcall alsa_card_sonicvibes_init+0x0/0x1b returned 0 after 370 usecs
calling alsa_ac97_init+0x0/0x8 @ 1
initcall alsa_ac97_init+0x0/0x8 returned 0 after 0 usecs
calling alsa_card_vortex_init+0x0/0x1b @ 1
initcall alsa_card_vortex_init+0x0/0x1b returned 0 after 382 usecs
calling alsa_card_vortex_init+0x0/0x1b @ 1
initcall alsa_card_vortex_init+0x0/0x1b returned 0 after 372 usecs
calling ct_card_init+0x0/0x1b @ 1
initcall ct_card_init+0x0/0x1b returned 0 after 373 usecs
calling alsa_card_cs46xx_init+0x0/0x1b @ 1
initcall alsa_card_cs46xx_init+0x0/0x1b returned 0 after 374 usecs
calling mod_init+0x0/0x1b @ 1
initcall mod_init+0x0/0x1b returned 0 after 441 usecs
calling alsa_card_echo_init+0x0/0x1b @ 1
initcall alsa_card_echo_init+0x0/0x1b returned 0 after 373 usecs
calling alsa_card_echo_init+0x0/0x1b @ 1
initcall alsa_card_echo_init+0x0/0x1b returned 0 after 371 usecs
calling alsa_card_echo_init+0x0/0x1b @ 1
initcall alsa_card_echo_init+0x0/0x1b returned 0 after 372 usecs
calling alsa_card_echo_init+0x0/0x1b @ 1
initcall alsa_card_echo_init+0x0/0x1b returned 0 after 370 usecs
calling alsa_card_echo_init+0x0/0x1b @ 1
initcall alsa_card_echo_init+0x0/0x1b returned 0 after 375 usecs
calling alsa_card_emu10k1_init+0x0/0x1b @ 1
initcall alsa_card_emu10k1_init+0x0/0x1b returned 0 after 426 usecs
calling alsa_card_hifier_init+0x0/0x1b @ 1
initcall alsa_card_hifier_init+0x0/0x1b returned 0 after 379 usecs
calling alsa_card_riptide_init+0x0/0x1b @ 1
initcall alsa_card_riptide_init+0x0/0x1b returned 0 after 374 usecs
calling alsa_card_hammerfall_init+0x0/0x1b @ 1
initcall alsa_card_hammerfall_init+0x0/0x1b returned 0 after 373 usecs
calling alsa_card_hdspm_init+0x0/0x1b @ 1
initcall alsa_card_hdspm_init+0x0/0x1b returned 0 after 372 usecs
calling alsa_card_vx222_init+0x0/0x1b @ 1
initcall alsa_card_vx222_init+0x0/0x1b returned 0 after 439 usecs
calling alsa_util_mem_init+0x0/0x8 @ 1
initcall alsa_util_mem_init+0x0/0x8 returned 0 after 0 usecs
calling alsa_sound_last_init+0x0/0x6f @ 1
ALSA device list:
No soundcards found.
initcall alsa_sound_last_init+0x0/0x6f returned 0 after 3893 usecs
calling flow_cache_init+0x0/0x11b @ 1
initcall flow_cache_init+0x0/0x11b returned 0 after 30 usecs
calling pg_init+0x0/0x10e @ 1
pktgen 2.72: Packet Generator for packet performance testing.
initcall pg_init+0x0/0x10e returned 0 after 5655 usecs
calling llc_init+0x0/0x20 @ 1
initcall llc_init+0x0/0x20 returned 0 after 2 usecs
calling llc2_init+0x0/0xa8 @ 1
NET: Registered protocol family 26
initcall llc2_init+0x0/0xa8 returned 0 after 3268 usecs
calling snap_init+0x0/0x39 @ 1
initcall snap_init+0x0/0x39 returned 0 after 16 usecs
calling rif_init+0x0/0x77 @ 1
initcall rif_init+0x0/0x77 returned 0 after 19 usecs
calling ipip_init+0x0/0x71 @ 1
IPv4 over IPv4 tunneling driver
PM: Adding info for No Bus:tunl0
initcall ipip_init+0x0/0x71 returned 0 after 6683 usecs
calling ipgre_init+0x0/0xb3 @ 1
GRE over IPv4 tunneling driver
PM: Adding info for No Bus:gre0
initcall ipgre_init+0x0/0xb3 returned 0 after 6513 usecs
calling init_syncookies+0x0/0x19 @ 1
initcall init_syncookies+0x0/0x19 returned 0 after 32 usecs
calling ipcomp4_init+0x0/0x66 @ 1
initcall ipcomp4_init+0x0/0x66 returned 0 after 3 usecs
calling ipip_init+0x0/0x9c @ 1
initcall ipip_init+0x0/0x9c returned 0 after 20 usecs
calling xfrm4_beet_init+0x0/0x17 @ 1
initcall xfrm4_beet_init+0x0/0x17 returned 0 after 1 usecs
calling tunnel4_init+0x0/0x66 @ 1
initcall tunnel4_init+0x0/0x66 returned 0 after 1 usecs
calling tcp_westwood_register+0x0/0x12 @ 1
TCP westwood registered
initcall tcp_westwood_register+0x0/0x12 returned 0 after 2242 usecs
calling hybla_register+0x0/0x12 @ 1
TCP hybla registered
initcall hybla_register+0x0/0x12 returned 0 after 1996 usecs
calling tcp_vegas_register+0x0/0x14 @ 1
TCP vegas registered
initcall tcp_vegas_register+0x0/0x14 returned 0 after 1987 usecs
calling tcp_illinois_register+0x0/0x12 @ 1
TCP illinois registered
initcall tcp_illinois_register+0x0/0x12 returned 0 after 2249 usecs
calling xfrm_user_init+0x0/0x4a @ 1
Initializing XFRM netlink socket
initcall xfrm_user_init+0x0/0x4a returned 0 after 3065 usecs
calling packet_init+0x0/0x47 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x47 returned 0 after 3218 usecs
calling br_init+0x0/0xad @ 1
initcall br_init+0x0/0xad returned 0 after 48 usecs
calling ipx_init+0x0/0xf5 @ 1
NET: Registered protocol family 4
initcall ipx_init+0x0/0xf5 returned 0 after 3197 usecs
calling atalk_init+0x0/0x88 @ 1
NET: Registered protocol family 5
initcall atalk_init+0x0/0x88 returned 0 after 3192 usecs
calling can_init+0x0/0x120 @ 1
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
initcall can_init+0x0/0x120 returned 0 after 8231 usecs
calling raw_module_init+0x0/0x3d @ 1
can: raw protocol (rev 20090105)
initcall raw_module_init+0x0/0x3d returned 0 after 3026 usecs
calling bcm_module_init+0x0/0x5b @ 1
can: broadcast manager protocol (rev 20090105 t)
initcall bcm_module_init+0x0/0x5b returned 0 after 4385 usecs
calling af_rxrpc_init+0x0/0x1a0 @ 1
NET: Registered protocol family 33
initcall af_rxrpc_init+0x0/0x1a0 returned 0 after 3330 usecs
calling rxkad_init+0x0/0x68 @ 1
RxRPC: Registered security type 2 'rxkad'
initcall rxkad_init+0x0/0x68 returned 0 after 4626 usecs
calling econet_proto_init+0x0/0x5b @ 1
NET: Registered protocol family 19
initcall econet_proto_init+0x0/0x5b returned 0 after 3316 usecs
calling phonet_init+0x0/0x78 @ 1
NET: Registered protocol family 35
initcall phonet_init+0x0/0x78 returned 0 after 3279 usecs
calling pep_register+0x0/0x17 @ 1
initcall pep_register+0x0/0x17 returned 0 after 5 usecs
calling ieee802154_nl_init+0x0/0x8b @ 1
initcall ieee802154_nl_init+0x0/0x8b returned 0 after 95 usecs
calling af_ieee802154_init+0x0/0x79 @ 1
NET: Registered protocol family 36
initcall af_ieee802154_init+0x0/0x79 returned 0 after 3200 usecs
calling wimax_subsys_init+0x0/0x1f3 @ 1
initcall wimax_subsys_init+0x0/0x1f3 returned 0 after 61 usecs
calling mce_debugfs_init+0x0/0x3c @ 1
initcall mce_debugfs_init+0x0/0x3c returned 0 after 39 usecs
calling severities_debugfs_init+0x0/0x3c @ 1
initcall severities_debugfs_init+0x0/0x3c returned 0 after 18 usecs
calling hpet_insert_resource+0x0/0x23 @ 1
initcall hpet_insert_resource+0x0/0x23 returned 1 after 0 usecs
initcall hpet_insert_resource+0x0/0x23 returned with error code 1
calling lapic_insert_resource+0x0/0x3f @ 1
initcall lapic_insert_resource+0x0/0x3f returned 0 after 4 usecs
calling init_lapic_nmi_sysfs+0x0/0x39 @ 1
initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 0 usecs
calling io_apic_bug_finalize+0x0/0x1b @ 1
initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
calling check_early_ioremap_leak+0x0/0x65 @ 1
initcall check_early_ioremap_leak+0x0/0x65 returned 0 after 0 usecs
calling sched_init_debug+0x0/0x24 @ 1
initcall sched_init_debug+0x0/0x24 returned 0 after 24 usecs
calling init_oops_id+0x0/0x36 @ 1
initcall init_oops_id+0x0/0x36 returned 0 after 5 usecs
calling disable_boot_consoles+0x0/0x45 @ 1
initcall disable_boot_consoles+0x0/0x45 returned 0 after 0 usecs
calling pm_qos_power_init+0x0/0x61 @ 1
PM: Adding info for No Bus:cpu_dma_latency
PM: Adding info for No Bus:network_latency
PM: Adding info for No Bus:network_throughput
initcall pm_qos_power_init+0x0/0x61 returned 0 after 12911 usecs
calling software_resume+0x0/0x1d8 @ 1
PM: Resume from disk failed.
initcall software_resume+0x0/0x1d8 returned -2 after 2746 usecs
initcall software_resume+0x0/0x1d8 returned with error code -2
calling taskstats_init+0x0/0x95 @ 1
registered taskstats version 1
initcall taskstats_init+0x0/0x95 returned 0 after 2870 usecs
calling clear_boot_tracer+0x0/0x2d @ 1
initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs
calling fail_page_alloc_debugfs+0x0/0xe1 @ 1
initcall fail_page_alloc_debugfs+0x0/0xe1 returned 0 after 177 usecs
calling max_swapfiles_check+0x0/0x8 @ 1
initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
calling failslab_debugfs_init+0x0/0x6b @ 1
initcall failslab_debugfs_init+0x0/0x6b returned 0 after 133 usecs
calling kmemleak_late_init+0x0/0x89 @ 1
kmemleak: Kernel memory leak detector initialized
initcall kmemleak_late_init+0x0/0x89 returned 0 after 4553 usecs
calling init_ima+0x0/0x1a @ 1
kmemleak: Automatic memory scanning thread started
No TPM chip found, activating TPM-bypass!
initcall init_ima+0x0/0x1a returned 0 after 8469 usecs
calling fail_make_request_debugfs+0x0/0x19 @ 1
initcall fail_make_request_debugfs+0x0/0x19 returned 0 after 416 usecs
calling fail_io_timeout_debugfs+0x0/0x19 @ 1
initcall fail_io_timeout_debugfs+0x0/0x19 returned 0 after 258 usecs
calling random32_reseed+0x0/0x56 @ 1
initcall random32_reseed+0x0/0x56 returned 0 after 7 usecs
calling pci_resource_alignment_sysfs_init+0x0/0x19 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x19 returned 0 after 17 usecs
calling pci_sysfs_init+0x0/0x51 @ 1
initcall pci_sysfs_init+0x0/0x51 returned 0 after 1271 usecs
calling boot_wait_for_devices+0x0/0x19 @ 1
initcall boot_wait_for_devices+0x0/0x19 returned 0 after 0 usecs
calling regulator_init_complete+0x0/0x140 @ 1
initcall regulator_init_complete+0x0/0x140 returned 0 after 19 usecs
calling seqgen_init+0x0/0xf @ 1
initcall seqgen_init+0x0/0xf returned 0 after 13 usecs
calling late_resume_init+0x0/0x126 @ 1
Magic number: 13:700:373
vc vcsa1: hash matches
initcall late_resume_init+0x0/0x126 returned 0 after 4753 usecs
calling hd_init+0x0/0x302 @ 1
hd: no drives specified - use hd=cyl,head,sectors on kernel command line
initcall hd_init+0x0/0x302 returned -1 after 6574 usecs
initcall hd_init+0x0/0x302 returned with error code -1
calling scsi_complete_async_scans+0x0/0x166 @ 1
initcall scsi_complete_async_scans+0x0/0x166 returned 0 after 0 usecs
calling edd_init+0x0/0x1c6 @ 1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
initcall edd_init+0x0/0x1c6 returned 0 after 5238 usecs
calling memmap_init+0x0/0xa3 @ 1
initcall memmap_init+0x0/0xa3 returned 0 after 362 usecs
calling pci_mmcfg_late_insert_resources+0x0/0x41 @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x41 returned 0 after 9 usecs
calling init_net_drop_monitor+0x0/0x142 @ 1
Initalizing network drop monitor service
initcall init_net_drop_monitor+0x0/0x142 returned 0 after 3777 usecs
calling tcp_congestion_default+0x0/0x12 @ 1
initcall tcp_congestion_default+0x0/0x12 returned 0 after 2 usecs
calling initialize_hashrnd+0x0/0x19 @ 1
initcall initialize_hashrnd+0x0/0x19 returned 0 after 5 usecs
async_waiting @ 1
ata1.00: unsupported CDB len
async_waiting @ 827
async_continuing @ 827 after 1 usec
initcall 1_async_port_probe+0x0/0xbb returned 0 after 10219617 usecs
async_continuing @ 828 after 10058431 usec
initcall 2_async_port_probe+0x0/0xbb returned 0 after 10225528 usecs
async_continuing @ 833 after 9899190 usec
scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
PM: Adding info for No Bus:target2:0:0
PM: Adding info for scsi:2:0:0:0
PM: Adding info for No Bus:2:0:0:0
PM: Adding info for No Bus:2:0:0:0
calling 5_sd_probe_async+0x0/0x1ef @ 828
sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
PM: Adding info for No Bus:sg0
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
initcall 3_async_port_probe+0x0/0xbb returned 0 after 10241310 usecs
async_continuing @ 834 after 10078387 usec
initcall 4_async_port_probe+0x0/0xbb returned 0 after 10247317 usecs
async_continuing @ 1 after 6861372 usec
async_waiting @ 1
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Adding info for No Bus:sda
sda: sda1 sda2 sda3 sda4 < sda5 >
PM: Adding info for No Bus:sda1
PM: Adding info for No Bus:sda2
PM: Adding info for No Bus:sda3
PM: Adding info for No Bus:sda4
PM: Adding info for No Bus:sda5
PM: Adding info for No Bus:8:0
sd 2:0:0:0: [sda] Attached SCSI disk
initcall 5_sd_probe_async+0x0/0x1ef returned 0 after 127432 usecs
async_continuing @ 1 after 89734 usec
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
async/2 used greatest stack depth: 4680 bytes left
async/1 used greatest stack depth: 4200 bytes left
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
async_waiting @ 1
async_continuing @ 1 after 1 usec
debug: unmapping init memory ffffffff81def000..ffffffff81eba000
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
modprobe used greatest stack depth: 3424 bytes left
BUG: unable to handle kernel NULL pointer dereference at 0000000000000240
IP: [<ffffffff812ed376>] uart_close+0x2a/0x1f9
PGD 79a76067 PUD 79aa9067 PMD 0
Oops: 0000 [#1] DEBUG_PAGEALLOC
last sysfs file:
CPU 0
Modules linked in:
Pid: 1110, comm: hwclock Not tainted 2.6.32-rc4 #1 System Product Name
RIP: 0010:[<ffffffff812ed376>] [<ffffffff812ed376>] uart_close+0x2a/0x1f9
RSP: 0018:ffff880079aafb28 EFLAGS: 00010246
RAX: ffffffff812ed34c RBX: ffff8800799cd000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff880079a7cc80 RDI: ffff8800799cd000
RBP: ffff880079aafb68 R08: ffffffff81d2ede0 R09: 0000000000000246
R10: ffff880079a7cc80 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8800799cd000 R14: ffff880079a7cc80 R15: ffff880079a7cc80
FS: 00007f7ce2f906f0(0000) GS:ffffffff81b42000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000240 CR3: 0000000079aad000 CR4: 00000000000026f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process hwclock (pid: 1110, threadinfo ffff880079aae000, task ffff88007a6a0000)
Stack:
00000000ffffffff ffff88007bb88df0 ffff880079aafb68 ffff8800799cd000
<0> 0000000000000000 0000000000000000 ffff880079a7cc80 ffff88007bb88df0
<0> ffff880079aafc48 ffffffff812c772a 0000000000000001 ffffffff81776706
Call Trace:
[<ffffffff812c772a>] tty_release_dev+0x1ad/0x4c0
[<ffffffff81776706>] ? mutex_unlock+0xe/0x10
[<ffffffff81776706>] ? mutex_unlock+0xe/0x10
[<ffffffff812ecde8>] ? uart_open+0xb1/0x26a
[<ffffffff812c802d>] __tty_open+0x37b/0x471
[<ffffffff812c8131>] tty_open+0xe/0x11
[<ffffffff81117dc8>] chrdev_open+0x18d/0x1ae
[<ffffffff81117c3b>] ? chrdev_open+0x0/0x1ae
[<ffffffff811133b8>] __dentry_open+0x1c1/0x333
[<ffffffff811135f9>] nameidata_to_filp+0x41/0x52
[<ffffffff81120ce7>] do_filp_open+0x4d5/0x9ae
[<ffffffff8103ef41>] ? native_sched_clock+0x3b/0x52
[<ffffffff8103ef02>] ? sched_clock+0x17/0x1b
[<ffffffff81095043>] ? lock_release_holdtime+0x1c/0x10e
[<ffffffff81778420>] ? _spin_unlock+0x2b/0x30
[<ffffffff8112a4b3>] ? alloc_fd+0x112/0x124
[<ffffffff811130ff>] do_sys_open+0x63/0x10f
[<ffffffff811131de>] sys_open+0x20/0x22
[<ffffffff81038dff>] system_call_fastpath+0x16/0x1b
Code: c3 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 18 0f 1f 44 00 00 f6 05 62 77 56 01 08 4c 8b a7 28 04 00 00 49 89 fd 49 89 f7 <4d> 8b b4 24 40 02 00 00 74 16 f6 05 4b 77 56 01 40 74 0d 80 3d
RIP [<ffffffff812ed376>] uart_close+0x2a/0x1f9
RSP <ffff880079aafb28>
CR2: 0000000000000240
---[ end trace a9fc1313607e0850 ]---
sky2 eth0: enabling interface
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
CPA self-test:
4k 524192 large 0 gb 0 x 262144[ffff880000000000-ffff88003ffff000] miss 0
4k 524192 large 0 gb 0 x 262144[ffff880000000000-ffff88003ffff000] miss 0
4k 524192 large 0 gb 0 x 262144[ffff880000000000-ffff88003ffff000] miss 0
ok.
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
end_request: I/O error, dev fd0, sector 0
Buffer I/O error on device fd0, logical block 0
EXT3 FS on sda3, internal journal
Adding 4096532k swap on /dev/sda5. Priority:-1 extents:1 across:4096532k
rc.sysinit used greatest stack depth: 3376 bytes left
warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
PM: Adding info for No Bus:vcs4
PM: Adding info for No Bus:vcsa4
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Adding info for No Bus:vcs5
PM: Adding info for No Bus:vcsa5
PM: Adding info for No Bus:vcs9
PM: Adding info for No Bus:vcsa9
PM: Adding info for No Bus:vcs8
PM: Adding info for No Bus:vcsa8
PM: Adding info for No Bus:vcs10
PM: Adding info for No Bus:vcsa10
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7
PM: Adding info for No Bus:vcs11
PM: Adding info for No Bus:vcsa11
PM: Adding info for No Bus:vcs6
PM: Adding info for No Bus:vcsa6
PM: Adding info for No Bus:vcs3
PM: Adding info for No Bus:vcsa3
kmemleak: 11 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
View attachment "config" of type "text/plain" (70083 bytes)
Powered by blists - more mailing lists