[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4B69BF05.6020802@gmail.com>
Date: Wed, 03 Feb 2010 10:23:01 -0800
From: "Justin P. Mattock" <justinmattock@...il.com>
To: Michael Breuer <mbreuer@...jas.com>
CC: Stephen Hemminger <shemminger@...ux-foundation.org>,
Jarek Poplawski <jarkao2@...il.com>,
David Miller <davem@...emloft.net>, akpm@...ux-foundation.org,
flyboy@...il.com, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, Michael Chan <mchan@...adcom.com>,
Don Fry <pcnet32@...izon.net>,
Francois Romieu <romieu@...zoreil.com>,
Matt Carlson <mcarlson@...adcom.com>
Subject: Re: [PATCH] sky2: receive dma mapping error handling
On 02/03/10 09:07, Michael Breuer wrote:
> On 02/03/2010 11:56 AM, Stephen Hemminger wrote:
>> On Wed, 03 Feb 2010 11:47:19 -0500
>> Michael Breuer<mbreuer@...jas.com> wrote:
>>
>>> Tracked this down. The status being returned is 0x3c0080 - good flow
>>> control packets. Nothing is actually being dropped (confirmed by packet
>>> trace on switch compared with packet trace on server).
>>>
>>> I whipped up a trivial patch to not count these as dropped packets and
>>> will post to netdev.
>>>
>>> I'm not really sure what the driver should be doing in this case, but
>>> resubmit seems to work.
>> Looks like a flow control negotiation issue. You probably turned off
>> flow control on the Linux side, but the switch is still doing flow
>> control.
>>
> According to the driver:
> Feb 3 12:03:02 mail kernel: sky2 eth0: Link is up at 1000 Mbps, full
> duplex, flow control both
>
> So if the rx flow control packet status is due to flow control being
> disabled, then there's a different issue.
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
hmm.. after an hour or so I'm not seeing anything.
from what I remember I turned the machine on in the
hotel, then left the system there as I went out for a few hours
(so maybe I need to wait).
Anyways I did keep dmesg of when this occurred, basically
the log was spammed with these:
[ 863.294057] sky2 eth0: rx error, status 0x580002 length 88
[ 865.646645] sky2 eth0: rx error, status 0x600002 length 96
[ 1286.420471] sky2 eth0: rx error, status 0x600002 length 96
[ 1286.499459] sky2 eth0: rx error, status 0x600002 length 96
[ 1746.903826] sky2 eth0: rx error, status 0x600002 length 96
[ 1754.263692] sky2 eth0: rx error, status 0x600002 length 96
[ 1755.309360] sky2 eth0: rx error, status 0x680002 length 104
[ 2213.256294] sky2 eth0: rx error, status 0x600002 length 96
[ 2219.653342] sky2 eth0: rx error, status 0x580002 length 88
[ 2221.673601] sky2 eth0: rx error, status 0x600002 length 96
[ 2679.654655] sky2 eth0: rx error, status 0x680002 length 104
[ 2692.315058] sky2 eth0: rx error, status 0x500002 length 80
[ 2694.349612] sky2 eth0: rx error, status 0x580002 length 88
[ 2703.676717] sky2 eth0: rx error, status 0x700002 length 112
[ 2703.826375] sky2 eth0: rx error, status 0x600002 length 96
[ 3187.504843] sky2 eth0: rx error, status 0x600002 length 96
[ 3189.560744] sky2 eth0: rx error, status 0x600002 length 96
[ 3672.475719] sky2 eth0: rx error, status 0x680002 length 104
[ 3676.696959] sky2 eth0: rx error, status 0x680002 length 104
but while using the system with this, I didn't notice anything
out of the ordinary.
(if this fires off I can try a bisect for you guys, but right now
since I'm not seeing anything, might be a different story);
Justin P. Mattock
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists