linux-kernel - Re: [RFC/PATCH v2] ia64, SR870, EFI bug breaks ata_piix, uninitialized ICH4 IDE EXBAR mem resource

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Sun, 30 Sep 2012 00:09:34 +0200
From:	Stephan Schreiber <info@...driver.org>
To:	Bjorn Helgaas <bhelgaas@...gle.com>
Cc:	Alan Cox <alan@...rguk.ukuu.org.uk>, linux-ia64@...r.kernel.org,
	linux-pci@...r.kernel.org, linux-ide@...r.kernel.org,
	linux-kernel@...r.kernel.org, 679545@...s.debian.org,
	jrnieder@...il.com
Subject: Re: [RFC/PATCH v2] ia64, SR870, EFI bug breaks ata_piix,
 uninitialized ICH4 IDE EXBAR mem resource

Hello Bjorn,
thank you very much for the patch.
I tested it; it works.

(typing mistake: it must read PCI_COMMAND_MEMORY instead of  
PCI_COMMAND_MEM at one location;
some hunks of the patch couldn't be applied automatically on Kernel  
3.2.23 because some comments in the contexts are different)

The dmesg output:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-3-mckinley (Debian 3.2.23-1)  
(debian-kernel@...ts.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) )  
#1 SMP Fri Sep 28 21:57:11 CEST 2012
...
[    0.065510] pci 0000:00:1f.1: [8086:24cb] type 0 class 0x000101
[    0.065524] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.065535] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.065546] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.065556] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.065567] pci 0000:00:1f.1: reg 20: [io  0x1000-0x100f]
[    0.065578] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff unset]
...
[    1.391380] libata version 3.00 loaded.
[    1.391922] ata_piix 0000:00:1f.1: version 2.13
[    1.391938] ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
[    1.392493] scsi0 : ata_piix
[    1.392886] scsi1 : ata_piix
[    1.393018] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000 irq 34
[    1.393066] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1008 irq 33
[    1.557756] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JR03, max UDMA/33
[    1.573616] ata1.00: configured for UDMA/33
[    1.579147] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM  
GSA-T40N  JR03 PQ: 0 ANSI: 5
[    1.590806] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw  
xa/form2 cdda tray
[    1.590872] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.591272] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.593910] sr 0:0:0:0: Attached scsi generic sg0 type 5
...


How is the chance to get this patch or a similar one into linux-next?



> On x86, Windows normally doesn't reconfigure PCI devices unless it
> finds a problem with the configuration done by the BIOS.  I suspect
> it works similarly on ia64.  I would guess that Windows noticed that
> the MEM bit was not set, and therefore ignored the MEM BAR contents.

Since I have the four Windows versions 'for Itanium Based Systems' on  
that box as well (XP, Server 2003, 2008, 2008 R2), I can tell you more:
The Device Manager shows a memory range FFBFFC00-FFBFFFFF for the  
"Intel 82801DB Ultra ATA Storage Controller-24CB" - on any of these  
Windows versions.


Stephan



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/