linux-kernel - Re: applesmc oops in 3.10/3.11

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:	Wed, 2 Oct 2013 11:02:06 -0700
From:	Guenter Roeck <linux@...ck-us.net>
To:	Henrik Rydberg <rydberg@...omail.se>
Cc:	Chris Murphy <bugzilla@...orremedies.com>,
	Josh Boyer <jwboyer@...oraproject.org>, khali@...ux-fr.org,
	lm-sensors@...sensors.org,
	"Linux-Kernel@...r. Kernel. Org" <linux-kernel@...r.kernel.org>
Subject: Re: applesmc oops in 3.10/3.11

On Wed, Oct 02, 2013 at 07:24:10PM +0200, Henrik Rydberg wrote:
> On Wed, Oct 02, 2013 at 09:47:18AM -0700, Guenter Roeck wrote:
> > On Wed, Oct 02, 2013 at 06:34:18PM +0200, Henrik Rydberg wrote:
> > > > >>One thing I have seen in all logs is the earlier "send_byte fail" message, so
> > > > >>I think that is a pre-requisite.
> > > > >
> > > > >Not necessarily - it could be that the patch actually fixes the root
> > > > >cause. One possible scenario is that on recent SMCs, some of the
> > > > >commands produce more data than we actually read. This would
> > > > >eventually lead to both data corruption and overflow somwhere in the
> > > > >SMC internals.  If the original SMC error is interpreted as a read
> > > > >buffer overflow, then that problem should be fixed with this patch.
> > > > >
> > > > 
> > > > Good point.
> > > > 
> > > > But shouldn't we at least get the "flushed %d bytes" warning message in this case ?
> > > 
> > > The explanation I have there is that the (newer) SMC needs the
> > > application to read the 'no more bytes' or it will get confused. It
> > > makes sense, if the number of bytes to read is no longer specified.
> > > 
> > You mean that just reading from APPLESMC_CMD_PORT would solve the problem ?
> > That might make sense.
> 
> It also points at the possibility of a smaller patch to test, but I
> have not had the time to check this very deeply myself:
> 
I like this patch much more than the previous patch. Chris, can you test it ?

Thanks,
Guenter

> Thanks,
> Henrik
> 
> From 4451da32414080bd0563ee9e061f19bf90463cc5 Mon Sep 17 00:00:00 2001
> From: Henrik Rydberg <rydberg@...omail.se>
> Date: Wed, 2 Oct 2013 19:15:03 +0200
> Subject: [PATCH] applesmc remedy take 2
> 
> Conjectured problem: there are remnant bytes ready on the data line
> which corrupts the read after a failure.
> 
> Remedy: assuming bit0 is the read valid line, try to flush it before
> starting a new command.
> 
> Tests by Chris suggests reading the status is enough for the problem
> to go away, which is consistent with a change in the SMC interface,
> where the number of bytes to read is no longer specified, but found
> out by reading until end of data.
> 
> Tested on a MacBookAir3,1, but the original problem has not been
> reproduced.
> ---
>  drivers/hwmon/applesmc.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
> index 98814d1..c0ff350 100644
> --- a/drivers/hwmon/applesmc.c
> +++ b/drivers/hwmon/applesmc.c
> @@ -230,6 +230,7 @@ static int send_argument(const char *key)
>  
>  static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len)
>  {
> +	u8 status, data;
>  	int i;
>  
>  	if (send_command(cmd) || send_argument(key)) {
> @@ -237,6 +238,7 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len)
>  		return -EIO;
>  	}
>  
> +	/* This has no effect on newer (2012) SMCs */
>  	if (send_byte(len, APPLESMC_DATA_PORT)) {
>  		pr_warn("%.4s: read len fail\n", key);
>  		return -EIO;
> @@ -250,6 +252,17 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len)
>  		buffer[i] = inb(APPLESMC_DATA_PORT);
>  	}
>  
> +	/* Read the data port until bit0 is cleared */
> +	for (i = 0; i < 16; i++) {
> +		udelay(APPLESMC_MIN_WAIT);
> +		status = inb(APPLESMC_CMD_PORT);
> +		if (!(status & 0x01))
> +			break;
> +		data = inb(APPLESMC_DATA_PORT);
> +	}
> +	if (i)
> +		pr_warn("flushed %d bytes, last value is: %d\n", i, data);
> +
>  	return 0;
>  }
>  
> -- 
> 1.8.3.4
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/