| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <535B0324.50705@gmail.com>
Date: Sat, 26 Apr 2014 02:51:48 +0200
From: Tomasz Figa <tomasz.figa@...il.com>
To: Chanwoo Choi <cw00.choi@...sung.com>, kgene.kim@...sung.com,
t.figa@...sung.com
CC: linux-kernel@...r.kernel.org, linux@....linux.org.uk,
ben-linux@...ff.org, arnd@...db.de, olof@...om.net,
marc.zyngier@....com, thomas.abraham@...aro.org,
kyungmin.park@...sung.com, inki.dae@...sung.com,
sw0312.kim@...sung.com, hyunhee.kim@...sung.com,
yj44.cho@...sung.com, chanho61.park@...sung.com,
sajjan.linux@...il.com, tushar.behera@...aro.org,
sachin.kamat@...aro.org, linux-samsung-soc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
Jaehoon Chung <jh80.chung@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>
Subject: Re: [PATCHv4 7/7] ARM: dts: Add device tree sources for Exynos3250
Hi Chanwoo,
On 25.04.2014 03:16, Chanwoo Choi wrote:
> From: Tomasz Figa <t.figa@...sung.com>
>
> This patch add new exynos3250.dtsi to support Exynos3250 SoC based on Cortex-A7
> dual core and includes following dt nodes:
>
> - GIC interrupt controller
> - Pinctrl to control GPIOs
> - Clock controller
> - CPU information (Cortex-A7 dual core)
> - UART to support serial port
> - MCT (Multi Core Timer)
> - ADC (Analog Digital Converter)
> - I2C/SPI bus
> - Power domain
> - PMU (Performance Monitoring Unit)
> - MSHC (Mobile Storage Host Controller)
> - PWM (Pluse Width Modulation)
> - AMBA bus
>
> Signed-off-by: Tomasz Figa <t.figa@...sung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@...sung.com>
> Signed-off-by: Inki Dae <inki.dae@...sung.com>
> Signed-off-by: Hyunhee Kim <hyunhee.kim@...sung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@...sung.com>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
> Cc: Ben Dooks <ben-linux@...ff.org>
> Cc: Kukjin Kim <kgene.kim@...sung.com>
> Cc: Rob Herring <robh+dt@...nel.org>
> Cc: Pawel Moll <pawel.moll@....com>
> Cc: Mark Rutland <mark.rutland@....com>
> Cc: Ian Campbell <ijc+devicetree@...lion.org.uk>
> Cc: Kumar Gala <galak@...eaurora.org>
> Cc: Russell King <linux@....linux.org.uk>
> Cc: devicetree@...r.kernel.org
> ---
> arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 477 +++++++++++++++
> arch/arm/boot/dts/exynos3250.dtsi | 405 +++++++++++++
> arch/arm/boot/dts/exynos4212-tizenw.dts | 926 ++++++++++++++++++++++++++++++
> 3 files changed, 1808 insertions(+)
> create mode 100644 arch/arm/boot/dts/exynos3250-pinctrl.dtsi
> create mode 100644 arch/arm/boot/dts/exynos3250.dtsi
> create mode 100644 arch/arm/boot/dts/exynos4212-tizenw.dts
>
> diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
> new file mode 100644
> index 0000000..976490b
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
> @@ -0,0 +1,477 @@
> +/*
> + * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
> + * tree nodes are listed in this file.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +/ {
> + pinctrl@...00000 {
Could you use references instead of re-specifying the whole tree
hierarchy in every file a node is used?
Instead of
/ {
pinctrl@...00000 {
};
};
one may simply use
&pinctrl_0 {
};
You might just need to change the location of #include
"exynos3250-pinctrl.dtsi" from top of exynos3250.dtsi to bottom of it.
> + gpa0: gpa0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpa1: gpa1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpb: gpb {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc0: gpc0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpc1: gpc1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd0: gpd0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpd1: gpd1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + uart0_data: uart0-data {
> + samsung,pins = "gpa0-0", "gpa0-1";
> + samsung,pin-function = <0x2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart0_fctl: uart0-fctl {
> + samsung,pins = "gpa0-2", "gpa0-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart1_data: uart1-data {
> + samsung,pins = "gpa0-4", "gpa0-5";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + uart1_fctl: uart1-fctl {
> + samsung,pins = "gpa0-6", "gpa0-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c2_bus: i2c2-bus {
> + samsung,pins = "gpa0-6", "gpa0-7";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c3_bus: i2c3-bus {
> + samsung,pins = "gpa1-2", "gpa1-3";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi0_bus: spi0-bus {
> + samsung,pins = "gpb-0", "gpb-2", "gpb-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c4_bus: i2c4-bus {
> + samsung,pins = "gpb-0", "gpb-1";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + spi1_bus: spi1-bus {
> + samsung,pins = "gpb-4", "gpb-6", "gpb-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c5_bus: i2c5-bus {
> + samsung,pins = "gpb-2", "gpb-3";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2s2_bus: i2s2-bus {
> + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
> + "gpc1-4";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pcm2_bus: pcm2-bus {
> + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
> + "gpc1-4";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c6_bus: i2c6-bus {
> + samsung,pins = "gpc1-3", "gpc1-4";
> + samsung,pin-function = <4>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pwm0_out: pwm0-out {
> + samsung,pins = "gpd0-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pwm1_out: pwm1-out {
> + samsung,pins = "gpd0-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c7_bus: i2c7-bus {
> + samsung,pins = "gpd0-2", "gpd0-3";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pwm2_out: pwm2-out {
> + samsung,pins = "gpd0-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + pwm3_out: pwm3-out {
> + samsung,pins = "gpd0-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c0_bus: i2c0-bus {
> + samsung,pins = "gpd1-0", "gpd1-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + mipi0_clk: mipi0-clk {
> + samsung,pins = "gpd1-0", "gpd1-1";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + i2c1_bus: i2c1-bus {
> + samsung,pins = "gpd1-2", "gpd1-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> + };
> +
> + pinctrl@...00000 {
> + gpe0: gpe0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpe1: gpe1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpe2: gpe2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpk0: gpk0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpk1: gpk1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpk2: gpk2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpl0: gpl0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpm0: gpm0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpm1: gpm1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpm2: gpm2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpm3: gpm3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpm4: gpm4 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpx0: gpx0 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
> + <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
> + #interrupt-cells = <2>;
> + };
> +
> + gpx1: gpx1 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + interrupt-parent = <&gic>;
> + interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
> + <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
> + #interrupt-cells = <2>;
> + };
> +
> + gpx2: gpx2 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpx3: gpx3 {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + sd0_clk: sd0-clk {
> + samsung,pins = "gpk0-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_cmd: sd0-cmd {
> + samsung,pins = "gpk0-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_cd: sd0-cd {
> + samsung,pins = "gpk0-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_rdqs: sd0-rdqs {
> + samsung,pins = "gpk0-7";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus1: sd0-bus-width1 {
> + samsung,pins = "gpk0-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus4: sd0-bus-width4 {
> + samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd0_bus8: sd0-bus-width8 {
> + samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_clk: sd1-clk {
> + samsung,pins = "gpk1-0";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_cmd: sd1-cmd {
> + samsung,pins = "gpk1-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_cd: sd1-cd {
> + samsung,pins = "gpk1-2";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_bus1: sd1-bus-width1 {
> + samsung,pins = "gpk1-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + sd1_bus4: sd1-bus-width4 {
> + samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <3>;
> + };
> +
> + cam_port_b_io: cam-port-b-io {
> + samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
> + "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
> + "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <3>;
> + samsung,pin-drv = <0>;
> + };
> +
> + cam_port_b_clk_active: cam-port-b-clk-active {
> + samsung,pins = "gpm2-2";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <3>;
> + };
> +
> + cam_port_b_clk_idle: cam-port-b-clk-idle {
> + samsung,pins = "gpm2-2";
> + samsung,pin-function = <0>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_i2c0: fimc-is-i2c0 {
> + samsung,pins = "gpm4-0", "gpm4-1";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_i2c1: fimc-is-i2c1 {
> + samsung,pins = "gpm4-2", "gpm4-3";
> + samsung,pin-function = <2>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> +
> + fimc_is_uart: fimc-is-uart {
> + samsung,pins = "gpm3-5", "gpm3-7";
> + samsung,pin-function = <3>;
> + samsung,pin-pud = <0>;
> + samsung,pin-drv = <0>;
> + };
> + };
> +};
> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
> new file mode 100644
> index 0000000..5be3dd3
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos3250.dtsi
> @@ -0,0 +1,405 @@
> +/*
> + * Samsung's Exynos3250 SoC device tree source
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
> + * based board files can include this file and provide values for board specfic
> + * bindings.
> + *
> + * Note: This file does not include device nodes for all the controllers in
> + * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
> + * nodes can be added to this file.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include "skeleton.dtsi"
> +#include "exynos3250-pinctrl.dtsi"
> +#include <dt-bindings/clock/exynos3250.h>
> +
> +/ {
> + compatible = "samsung,exynos3250";
> + interrupt-parent = <&gic>;
> +
> + aliases {
> + pinctrl0 = &pinctrl_0;
> + pinctrl1 = &pinctrl_1;
> + mshc0 = &mshc_0;
> + mshc1 = &mshc_1;
> + spi0 = &spi_0;
> + spi1 = &spi_1;
> + i2c0 = &i2c_0;
> + i2c1 = &i2c_1;
> + i2c2 = &i2c_2;
> + i2c3 = &i2c_3;
> + i2c4 = &i2c_4;
> + i2c5 = &i2c_5;
> + i2c6 = &i2c_6;
> + i2c7 = &i2c_7;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0>;
> + clock-frequency = <1000000000>;
> + };
Why only one CPU? I believe Exynos3250 is dual core. Also are physical
IDs of the cores really 0 and 1? On Exynos4210 for example they are
0x900 and 0x901, while on Exynos4212 they are 0xa00 and 0xa01. Please
check this.
> + };
> +
> + fixed-rate-clocks {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + xusbxti: clock@0 {
> + compatible = "fixed-clock";
> + reg = <0>;
> + clock-frequency = <0>;
> + #clock-cells = <0>;
> + clock-output-names = "xusbxti";
> + };
> +
> + xxti: clock@1 {
> + compatible = "fixed-clock";
> + reg = <1>;
> + clock-frequency = <0>;
> + #clock-cells = <0>;
> + clock-output-names = "xxti";
> + };
> +
> + xtcxo: clock@2 {
> + compatible = "fixed-clock";
> + reg = <2>;
> + clock-frequency = <0>;
> + #clock-cells = <0>;
> + clock-output-names = "xtcxo";
> + };
> + };
> +
> + chipid@...00000 {
> + compatible = "samsung,exynos4210-chipid";
> + reg = <0x10000000 0x100>;
> + };
> +
> + sys_reg: syscon@...10000 {
> + compatible = "samsung,exynos3-sysreg", "syscon";
> + reg = <0x10010000 0x400>;
> + };
> +
> + pd_cam: cam-power-domain@...23C00 {
> + compatible = "samsung,exynos4210-pd";
> + reg = <0x10023C00 0x20>;
> + };
> +
> + pd_mfc: mfc-power-domain@...23C40 {
> + compatible = "samsung,exynos4210-pd";
> + reg = <0x10023C40 0x20>;
> + };
> +
> + pd_g3d: g3d-power-domain@...23C60 {
> + compatible = "samsung,exynos4210-pd";
> + reg = <0x10023C60 0x20>;
> + };
> +
> + pd_lcd0: lcd0-power-domain@...23C80 {
> + compatible = "samsung,exynos4210-pd";
> + reg = <0x10023C80 0x20>;
> + };
> +
> + pd_isp: isp-power-domain@...23CA0 {
> + compatible = "samsung,exynos4210-pd";
> + reg = <0x10023CA0 0x20>;
> + };
> +
> + cmu: clock-controller@...30000 {
> + compatible = "samsung,exynos3250-cmu";
> + reg = <0x10030000 0x20000>;
> + #clock-cells = <1>;
> + };
> +
> + rtc@...70000 {
Please add label to the node, so it can be referenced from board dts
files added later (using the method I explained above).
> + compatible = "samsung,s3c6410-rtc";
> + reg = <0x10070000 0x100>;
> + interrupts = <0 73 0>, <0 74 0>;
> + status = "disabled";
> + };
> +
> + gic: interrupt-controller@...81000 {
> + compatible = "arm,cortex-a15-gic";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x10481000 0x1000>,
> + <0x10482000 0x1000>,
> + <0x10484000 0x2000>,
> + <0x10486000 0x2000>;
> + interrupts = <1 9 0xf04>;
> + };
> +
> + mct@...50000 {
> + compatible = "samsung,exynos4210-mct";
> + reg = <0x10050000 0x800>;
> + interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
> + <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
> + clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
> + clock-names = "fin_pll", "mct";
> + };
> +
> + pinctrl_1: pinctrl@...00000 {
> + compatible = "samsung,exynos3250-pinctrl";
> + reg = <0x11000000 0x1000>;
> + interrupts = <0 225 0>;
> +
> + wakeup-interrupt-controller {
> + compatible = "samsung,exynos4210-wakeup-eint";
> + interrupt-parent = <&gic>;
> + interrupts = <0 48 0>;
> + };
> + };
> +
> + pinctrl_0: pinctrl@...00000 {
> + compatible = "samsung,exynos3250-pinctrl";
> + reg = <0x11400000 0x1000>;
> + interrupts = <0 240 0>;
> + };
> +
> + mshc_0: mshc@...10000 {
> + compatible = "samsung,exynos5250-dw-mshc";
> + reg = <0x12510000 0x1000>;
> + interrupts = <0 142 0>;
> + clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
> + clock-names = "biu", "ciu";
> + fifo-depth = <0x80>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + mshc_1: mshc@...20000 {
> + compatible = "samsung,exynos5250-dw-mshc";
> + reg = <0x12520000 0x1000>;
> + interrupts = <0 143 0>;
> + clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
> + clock-names = "biu", "ciu";
> + fifo-depth = <0x80>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + amba {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "arm,amba-bus";
> + interrupt-parent = <&gic>;
> + ranges;
> +
> + pdma0: pdma@...80000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x12680000 0x1000>;
> + interrupts = <0 138 0>;
> + clocks = <&cmu CLK_PDMA0>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
> +
> + pdma1: pdma@...90000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x12690000 0x1000>;
> + interrupts = <0 139 0>;
> + clocks = <&cmu CLK_PDMA1>;
> + clock-names = "apb_pclk";
> + #dma-cells = <1>;
> + #dma-channels = <8>;
> + #dma-requests = <32>;
> + };
> + };
> +
> + adc: adc@...C0000 {
> + compatible = "samsung,exynos-adc-v3";
> + reg = <0x126C0000 0x100>, <0x10020718 0x4>;
> + interrupts = <0 137 0>;
> + clock-names = "adc", "sclk_tsadc";
> + clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
> + #io-channel-cells = <1>;
> + io-channel-ranges;
> + status = "disabled";
> + };
> +
> + serial@...00000 {
Please add label.
> + compatible = "samsung,exynos4210-uart";
> + reg = <0x13800000 0x100>;
> + interrupts = <0 109 0>;
> + clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
> + clock-names = "uart", "clk_uart_baud0";
> + status = "disabled";
> + };
> +
> + serial@...10000 {
Ditto.
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists