| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <53F5DEEF.4070406@redhat.com>
Date: Thu, 21 Aug 2014 13:58:39 +0200
From: Tomas Henzl <thenzl@...hat.com>
To: Alexander Gordeev <agordeev@...hat.com>,
linux-kernel@...r.kernel.org
CC: James Smart <james.smart@...lex.com>, linux-scsi@...r.kernel.org,
linux-pci@...r.kernel.org
Subject: Re: [PATCH v3 11/13] lpfc: Use pci_enable_msix_range() instead of
pci_enable_msix()
On 08/21/2014 01:32 PM, Tomas Henzl wrote:
> On 08/18/2014 08:01 AM, Alexander Gordeev wrote:
>> As result of deprecation of MSI-X/MSI enablement functions
>> pci_enable_msix() and pci_enable_msi_block() all drivers
>> using these two interfaces need to be updated to use the
>> new pci_enable_msi_range() or pci_enable_msi_exact()
>> and pci_enable_msix_range() or pci_enable_msix_exact()
>> interfaces.
>>
>> Signed-off-by: Alexander Gordeev <agordeev@...hat.com>
>> Cc: James Smart <james.smart@...lex.com>
>> Cc: linux-scsi@...r.kernel.org
>> Cc: linux-pci@...r.kernel.org
>> ---
>> drivers/scsi/lpfc/lpfc_init.c | 39 +++++++++++++++++----------------------
>> 1 file changed, 17 insertions(+), 22 deletions(-)
>>
>> diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
>> index a5769a9..37f2a20 100644
>> --- a/drivers/scsi/lpfc/lpfc_init.c
>> +++ b/drivers/scsi/lpfc/lpfc_init.c
>> @@ -8211,9 +8211,9 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
>> * @phba: pointer to lpfc hba data structure.
>> *
>> * This routine is invoked to enable the MSI-X interrupt vectors to device
>> - * with SLI-3 interface specs. The kernel function pci_enable_msix() is
>> - * called to enable the MSI-X vectors. Note that pci_enable_msix(), once
>> - * invoked, enables either all or nothing, depending on the current
>> + * with SLI-3 interface specs. The kernel function pci_enable_msix_exact()
>> + * is called to enable the MSI-X vectors. Note that pci_enable_msix_exact(),
>> + * once invoked, enables either all or nothing, depending on the current
>> * availability of PCI vector resources. The device driver is responsible
>> * for calling the individual request_irq() to register each MSI-X vector
>> * with a interrupt handler, which is done in this function. Note that
>> @@ -8237,8 +8237,8 @@ lpfc_sli_enable_msix(struct lpfc_hba *phba)
>> phba->msix_entries[i].entry = i;
>>
>> /* Configure MSI-X capability structure */
>> - rc = pci_enable_msix(phba->pcidev, phba->msix_entries,
>> - ARRAY_SIZE(phba->msix_entries));
>> + rc = pci_enable_msix_exact(phba->pcidev, phba->msix_entries,
>> + LPFC_MSIX_VECTORS);
>> if (rc) {
>> lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
>> "0420 PCI enable MSI-X failed (%d)\n", rc);
> Hi Alexander
>
> the code continues with:
> goto -> pci_disable_msix(phba->pcidev);
> that call to disable_msix is also superfluous I think
> shouldn't that be fixed too?
> the same is also in lpfc_sli4_enable_msix
>
> Tomas
my bad, this was already fixed in
commit 029165acfa611a3a8838723f6978586ae35ff53d lpfc: Remove superfluous call to pci_disable_msix()
so patch looks good to me now
Reviewed-by: Tomas Henzl
>
>> @@ -8775,16 +8775,14 @@ out:
>> * @phba: pointer to lpfc hba data structure.
>> *
>> * This routine is invoked to enable the MSI-X interrupt vectors to device
>> - * with SLI-4 interface spec. The kernel function pci_enable_msix() is called
>> - * to enable the MSI-X vectors. Note that pci_enable_msix(), once invoked,
>> - * enables either all or nothing, depending on the current availability of
>> - * PCI vector resources. The device driver is responsible for calling the
>> - * individual request_irq() to register each MSI-X vector with a interrupt
>> - * handler, which is done in this function. Note that later when device is
>> - * unloading, the driver should always call free_irq() on all MSI-X vectors
>> - * it has done request_irq() on before calling pci_disable_msix(). Failure
>> - * to do so results in a BUG_ON() and a device will be left with MSI-X
>> - * enabled and leaks its vectors.
>> + * with SLI-4 interface spec. The kernel function pci_enable_msix_range()
>> + * is called to enable the MSI-X vectors. The device driver is responsible
>> + * for calling the individual request_irq() to register each MSI-X vector
>> + * with a interrupt handler, which is done in this function. Note that
>> + * later when device is unloading, the driver should always call free_irq()
>> + * on all MSI-X vectors it has done request_irq() on before calling
>> + * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
>> + * will be left with MSI-X enabled and leaks its vectors.
>> *
>> * Return codes
>> * 0 - successful
>> @@ -8805,17 +8803,14 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)
>> phba->sli4_hba.msix_entries[index].entry = index;
>> vectors++;
>> }
>> -enable_msix_vectors:
>> - rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
>> - vectors);
>> - if (rc > 1) {
>> - vectors = rc;
>> - goto enable_msix_vectors;
>> - } else if (rc) {
>> + rc = pci_enable_msix_range(phba->pcidev, phba->sli4_hba.msix_entries,
>> + 2, vectors);
>> + if (rc < 0) {
>> lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
>> "0484 PCI enable MSI-X failed (%d)\n", rc);
>> goto vec_fail_out;
>> }
>> + vectors = rc;
>>
>> /* Log MSI-X vector assignment */
>> for (index = 0; index < vectors; index++)
> --
> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists