lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 2 Apr 2015 11:45:14 +0200
From:	Gabriel Fernandez <gabriel.fernandez@...aro.org>
To:	Peter Griffin <peter.griffin@...aro.org>
Cc:	Lee Jones <lee.jones@...aro.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	Mike Turquette <mturquette@...aro.org>,
	"kernel@...inux.com" <kernel@...inux.com>, sboyd@...eaurora.org,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-arm-kernel@...ts.infradead.org" 
	<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [STLinux Kernel] [PATCH 0/4] clk: Provide support for always-on clocks

Hi Peter, Lee,

With these series as they are, we need  'clk_ignore_unused'  on
sthi407-b2120.dts and stih418-b2199.dts.

We have to modificate stih407-clock.dtsi and stih418-clock.dtsi in same way.

BR
Gabriel

On 2 April 2015 at 10:12, Peter Griffin <peter.griffin@...aro.org> wrote:
> Hi Lee,
>
> On Fri, 27 Feb 2015, Lee Jones wrote:
>
>> Some hardware contains bunches of clocks which must never be
>> turned off.  If drivers a) fail to obtain a reference to any
>> of these or b) give up a previously obtained reference
>> during suspend, the common clk framework will attempt to
>> disable them and a platform can fail irrecoverably as a
>> result.  Usually the only way to recover from these failures
>> is to reboot.
>>
>> To avoid either of these two scenarios from catastrophically
>> disabling an otherwise perfectly healthy running system,
>> clocks can be identified as always-on using this property
>> from inside a clocksource's node.  The CLK_IGNORE_UNUSED
>> flag will be applied to each clock instance named in this
>> property, thus preventing them from being shut down by the
>> framework.
>
> Great stuff.
>
> One minor comment is that assuming this works on stih407 and stih410
> to the extent that the platform can now boot without clk_ignore_unused
> kenel parameter then you should have an additional patch to remove
> clk_ignore_unused from the default bootargs in stih407-b2120.dts and
> stih410-b2120.dts files.
>
> Maxime - Is it possible for you to test this series on stih418-b2199 as
> a well? As it could most likely also be removed from stih418-b2199.dts file
> to, but neither Lee or myself have the hardware to test.
>
> Apart from that, for the series: -
>  Acked-by: Peter Griffin <peter.griffin@...aro.org>
>
> regards,
>
> Peter.
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists