| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1433920119-16303-1-git-send-email-yoshitake.kobayashi@toshiba.co.jp>
Date: Wed, 10 Jun 2015 16:08:39 +0900
From: KOBAYASHI Yoshitake <yoshitake.kobayashi@...hiba.co.jp>
To: dwmw2@...radead.org, computersforpeace@...il.com,
linux-mtd@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org,
KOBAYASHI Yoshitake <yoshitake.kobayashi@...hiba.co.jp>
Subject: [PATCH] mtd: nand: support for Toshiba BENAND (Built-in ECC NAND)
This patch enables support for Toshiba BENAND.
Toshiba BENAND is a SLC NAND solution that automatically generates ECC
inside NAND chip. Newer generation SLC NAND devices of today need multi-bit
hardware ECC by NAND controller in SoC. BENAND solution is ECC free,
has high performance and backward compatibility in NAND chip trend.
Signed-off-by: KOBAYASHI Yoshitake <yoshitake.kobayashi@...hiba.co.jp>
---
drivers/mtd/nand/Kconfig | 16 ++++++++++++++++
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/nand_base.c | 32 ++++++++++++++++++++++++++++++--
include/linux/mtd/nand.h | 3 +++
4 files changed, 50 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 5897d8d..2f11d43 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -22,6 +22,22 @@ menuconfig MTD_NAND
if MTD_NAND
+config MTD_NAND_BENAND
+ tristate
+ depends on MTD_NAND_BENAND_ENABLE
+ default MTD_NAND
+
+config MTD_NAND_BENAND_ENABLE
+ bool "Support for Toshiba BENAND (Built-in ECC NAND)"
+ default y
+ help
+ Toshiba BENAND is a SLC NAND solution that automatically
+ generates ECC inside NAND chip.
+ Newer generation SLC NAND devices of today need multi-bit
+ hardware ECC by NAND controller in SoC.
+ BENAND solution is ECC free, has high performance and
+ backward compatibility in NAND chip trend.
+
config MTD_NAND_BCH
tristate
select BCH
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 582bbd05..afd26f0 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_MTD_NAND) += nand.o
+obj-$(CONFIG_MTD_NAND_BENAND) += nand_benand.o
obj-$(CONFIG_MTD_NAND_ECC) += nand_ecc.o
obj-$(CONFIG_MTD_NAND_BCH) += nand_bch.o
obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index c2e1232..98a8932 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -43,6 +43,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/nand_bch.h>
+#include <linux/mtd/nand_benand.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <linux/leds.h>
@@ -3526,8 +3527,17 @@ static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
if (id_len >= 6 && id_data[0] == NAND_MFR_TOSHIBA &&
nand_is_slc(chip) &&
(id_data[5] & 0x7) == 0x6 /* 24nm */ &&
- !(id_data[4] & 0x80) /* !BENAND */) {
- mtd->oobsize = 32 * mtd->writesize >> 9;
+ (id_data[4] & 0x80) /* BENAND */) {
+ pr_info("24nm BENAND\n");
+
+ if (IS_ENABLED(CONFIG_MTD_NAND_BENAND)) {
+ chip->ecc.mode = NAND_ECC_BENAND;
+ pr_info("Selected BENAND Driver\n");
+ }
+
+ } else {
+ pr_info("24nm SLC NAND\n");
+ mtd->oobsize = 32 * mtd->writesize >> 9; /* !BENAND */
}
}
@@ -4075,6 +4085,24 @@ int nand_scan_tail(struct mtd_info *mtd)
}
break;
+ case NAND_ECC_BENAND:
+ if (!mtd_nand_has_benand()) {
+ pr_warn("CONFIG_MTD_NAND_BENAND not enabled\n");
+ BUG();
+ }
+ ecc->calculate = NULL;
+ ecc->correct = NULL;
+ ecc->read_page = nand_read_page_benand;
+ ecc->read_subpage = nand_read_subpage_benand;
+ ecc->write_page = nand_write_page_raw;
+ ecc->read_page_raw = nand_read_page_raw;
+ ecc->write_page_raw = nand_write_page_raw;
+ ecc->read_oob = nand_read_oob_std;
+ ecc->write_oob = nand_write_oob_std;
+
+ nand_benand_init(mtd);
+ break;
+
case NAND_ECC_NONE:
pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
ecc->read_page = nand_read_page_raw;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 3d4ea7e..8f59ad9 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -101,6 +101,8 @@ extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
/* Status bits */
#define NAND_STATUS_FAIL 0x01
#define NAND_STATUS_FAIL_N1 0x02
+/* Recommended to rewrite for BENAND */
+#define NAND_STATUS_RECOM_REWRT 0x08
#define NAND_STATUS_TRUE_READY 0x20
#define NAND_STATUS_READY 0x40
#define NAND_STATUS_WP 0x80
@@ -115,6 +117,7 @@ typedef enum {
NAND_ECC_HW_SYNDROME,
NAND_ECC_HW_OOB_FIRST,
NAND_ECC_SOFT_BCH,
+ NAND_ECC_BENAND,
} nand_ecc_modes_t;
/*
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists