| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <55E47E40.30207@kernel.org>
Date: Mon, 31 Aug 2015 17:18:08 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Markus Pargmann <mpa@...gutronix.de>
Cc: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>,
Irina Tirdea <irina.tirdea@...el.com>,
Lars-Peter Clausen <lars@...afoo.de>,
linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
kernel@...gutronix.de
Subject: Re: [PATCH v2 4/4] iio: bmc150: Add SPI driver
On 20/08/15 13:49, Markus Pargmann wrote:
> Add a simple SPI driver which initializes the spi regmap for the bmc150
> core driver.
>
> Signed-off-by: Markus Pargmann <mpa@...gutronix.de>
Looks good to me, but clearly will have to wait for the earlier
patches in the series.
Nearly there!
Jonathan
> ---
> drivers/iio/accel/Kconfig | 5 +++
> drivers/iio/accel/Makefile | 1 +
> drivers/iio/accel/bmc150-accel-spi.c | 83 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 89 insertions(+)
> create mode 100644 drivers/iio/accel/bmc150-accel-spi.c
>
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index 6da4eb0db57b..56d24fa3d34a 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -23,6 +23,7 @@ config BMC150_ACCEL
> select IIO_TRIGGERED_BUFFER
> select REGMAP
> select BMC150_ACCEL_I2C if I2C
> + select BMC150_ACCEL_SPI if SPI
> help
> Say yes here to build support for the following Bosch accelerometers:
> BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
> @@ -35,6 +36,10 @@ config BMC150_ACCEL_I2C
> tristate
> select REGMAP_I2C
>
> +config BMC150_ACCEL_SPI
> + tristate
> + select REGMAP_SPI
> +
> config HID_SENSOR_ACCEL_3D
> depends on HID_SENSOR_HUB
> select IIO_BUFFER
> diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
> index 5ef8bdbad092..e579e93bf022 100644
> --- a/drivers/iio/accel/Makefile
> +++ b/drivers/iio/accel/Makefile
> @@ -6,6 +6,7 @@
> obj-$(CONFIG_BMA180) += bma180.o
> obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
> obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
> +obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o
> obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
> obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
> obj-$(CONFIG_KXSD9) += kxsd9.o
> diff --git a/drivers/iio/accel/bmc150-accel-spi.c b/drivers/iio/accel/bmc150-accel-spi.c
> new file mode 100644
> index 000000000000..1c2a4f683da4
> --- /dev/null
> +++ b/drivers/iio/accel/bmc150-accel-spi.c
> @@ -0,0 +1,83 @@
> +/*
> + * 3-axis accelerometer driver supporting following I2C Bosch-Sensortec chips:
> + * - BMC150
> + * - BMI055
> + * - BMA255
> + * - BMA250E
> + * - BMA222E
> + * - BMA280
> + *
> + * Copyright (c) 2014, Intel Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/acpi.h>
> +#include <linux/regmap.h>
> +#include <linux/spi/spi.h>
> +
> +#include "bmc150-accel.h"
> +
> +static const struct regmap_config bmc150_spi_regmap_conf = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = 0x3f,
> +};
> +
> +static int bmc150_accel_probe(struct spi_device *spi)
> +{
> + struct regmap *regmap;
> + const struct spi_device_id *id = spi_get_device_id(spi);
> +
> + regmap = devm_regmap_init_spi(spi, &bmc150_spi_regmap_conf);
> + if (IS_ERR(regmap)) {
> + dev_err(&spi->dev, "Failed to initialize spi regmap\n");
> + return PTR_ERR(regmap);
> + }
> +
> + return bmc150_accel_core_probe(&spi->dev, regmap, spi->irq,
> + id->name, id->driver_data, true);
> +}
> +
> +static int bmc150_accel_remove(struct spi_device *spi)
> +{
> + return bmc150_accel_core_remove(&spi->dev);
> +}
> +
> +static const struct spi_device_id bmc150_accel_id[] = {
> + {"bmc150_accel", bmc150},
> + {"bmi055_accel", bmi055},
> + {"bma255", bma255},
> + {"bma250e", bma250e},
> + {"bma222e", bma222e},
> + {"bma280", bma280},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(spi, bmc150_accel_id);
> +
> +static struct spi_driver bmc150_accel_driver = {
> + .driver = {
> + .name = "bmc150_accel_spi",
> + .acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match),
> + .pm = &bmc150_accel_pm_ops,
> + },
> + .probe = bmc150_accel_probe,
> + .remove = bmc150_accel_remove,
> + .id_table = bmc150_accel_id,
> +};
> +module_spi_driver(bmc150_accel_driver);
> +
> +MODULE_AUTHOR("Markus Pargmann <mpa@...gutronix.de>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("BMC150 SPI accelerometer driver");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists