| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <56FD1ED4.4040200@synopsys.com>
Date: Thu, 31 Mar 2016 13:57:56 +0100
From: Jose Abreu <Jose.Abreu@...opsys.com>
To: Archit Taneja <architt@...eaurora.org>,
Jose Abreu <Jose.Abreu@...opsys.com>,
<linux-snps-arc@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <dri-devel@...ts.freedesktop.org>,
<alsa-devel@...a-project.org>, <devicetree@...r.kernel.org>
CC: <tixy@...aro.org>, <mark.rutland@....com>, <broonie@...nel.org>,
<Alexey.Brodkin@...opsys.com>, <lgirdwood@...il.com>,
<yitian.bu@...gramtek.com>, <wsa+renesas@...g-engineering.com>,
<laurent.pinchart+renesas@...asonboard.com>,
<nariman@...nsource.wolfsonmicro.com>,
<Maruthi.Bayyavarapu@....com>, <pawel.moll@....com>,
<ijc+devicetree@...lion.org.uk>, <Vineet.Gupta1@...opsys.com>,
<buyitian@...il.com>, <perex@...ex.cz>, <tiwai@...e.com>,
<robh+dt@...nel.org>, <galak@...eaurora.org>,
<alexander.deucher@....com>, <CARLOS.PALMINHA@...opsys.com>
Subject: Re: [PATCH 1/3 v2] drm/i2c/adv7511: Add audio support
Hi Archit,
On 29-03-2016 18:03, Archit Taneja wrote:
>
>
> On 3/29/2016 4:22 PM, Jose Abreu wrote:
>> Hi Archit,
>>
>> On 29-03-2016 09:05, Archit Taneja wrote:
>>> Hi,
>>>
>>> On 03/28/2016 08:06 PM, Jose Abreu wrote:
>>>> This patch adds audio support for the ADV7511 HDMI transmitter
>>>> using ALSA SoC.
>>>>
>>>> The code was ported from Analog Devices linux tree from
>>>> commit 1770c4a1e32b ("Merge remote-tracking branch
>>>> 'xilinx/master' into xcomm_zynq"), which is available at:
>>>> - https://github.com/analogdevicesinc/linux/
>>>>
>>>> The main core file was renamed from adv7511.c to adv7511_core.c
>>>> so that audio and video compile into a single adv7511.ko module
>>>> and to keep up with Analog Devices kernel tree.
>>>>
>>>> The audio can be disabled using menu-config so it is possible
>>>> to use only video mode.
>>>>
>>>> The HDMI mode is automatically started at boot and the audio
>>>> (when enabled) registers as a codec into ALSA.
>>>
>>> Is there a reason why we set the mode to HDMI at probe itself?
>>> Shouldn't it be okay to set the mode later once we read the
>>> EDID off the panel?
>>>
>>> Some more comments below.
>>>
>>
>> Well, when I was using this in kernel 3.18 (with an older version of the driver)
>> I noticed that DVI mode was being used even when HDMI was connected so I forced
>> the driver to start in HDMI mode. There were some changes in the driver so it is
>> possible that this is no longer needed. Should I drop it?
>
> Mode selection works fine with ADV7533 on a 4.5 kernel. I'm assuming it
> should work out of the box for ADV7511 too. We should drop this.
>
>
Ok, will drop.
>>
>>>>
>>>> SPDIF DAI format was also added to ASoC as it is required
>>>> by adv7511 audio.
>>>>
>>>> Signed-off-by: Jose Abreu <joabreu@...opsys.com>
>>>> ---
>>>>
>>>> No changes v1 -> v2.
>>>>
>>>> drivers/gpu/drm/i2c/Kconfig | 11 +
>>>> drivers/gpu/drm/i2c/Makefile | 2 +
>>>> drivers/gpu/drm/i2c/adv7511.c | 1024
>>>> -----------------------------------
>>>> drivers/gpu/drm/i2c/adv7511.h | 41 ++
>>>> drivers/gpu/drm/i2c/adv7511_audio.c | 310 +++++++++++
>>>> drivers/gpu/drm/i2c/adv7511_core.c | 1005
>>>> ++++++++++++++++++++++++++++++++++
>>>> include/sound/soc-dai.h | 1 +
>>>> 7 files changed, 1370 insertions(+), 1024 deletions(-)
>>>> delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
>>>> create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
>>>> create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c
>>>
>>> <snip>
>>>
>>>> +
>>>> +static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id
>>>> *id)
>>>> +{
>>>> + struct adv7511_link_config link_config;
>>>> + struct adv7511 *adv7511;
>>>> + struct device *dev = &i2c->dev;
>>>> + unsigned int val;
>>>> + int ret;
>>>> +
>>>> + if (!dev->of_node)
>>>> + return -EINVAL;
>>>> +
>>>> + adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
>>>> + if (!adv7511)
>>>> + return -ENOMEM;
>>>> +
>>>> + adv7511->powered = false;
>>>> + adv7511->status = connector_status_disconnected;
>>>> +
>>>> + ret = adv7511_parse_dt(dev->of_node, &link_config);
>>>> + if (ret)
>>>> + return ret;
>>>> +
>>>> + /*
>>>> + * The power down GPIO is optional. If present, toggle it from active to
>>>> + * inactive to wake up the encoder.
>>>> + */
>>>> + adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
>>>> + if (IS_ERR(adv7511->gpio_pd))
>>>> + return PTR_ERR(adv7511->gpio_pd);
>>>> +
>>>> + if (adv7511->gpio_pd) {
>>>> + mdelay(5);
>>>> + gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
>>>> + }
>>>> +
>>>> + adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
>>>> + if (IS_ERR(adv7511->regmap))
>>>> + return PTR_ERR(adv7511->regmap);
>>>> +
>>>> + ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
>>>> + if (ret)
>>>> + return ret;
>>>> + dev_dbg(dev, "Rev. %d\n", val);
>>>> +
>>>> + ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
>>>> + ARRAY_SIZE(adv7511_fixed_registers));
>>>> + if (ret)
>>>> + return ret;
>>>> +
>>>> + regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
>>>> + regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
>>>> + packet_i2c_addr);
>>>> + regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
>>>> + adv7511_packet_disable(adv7511, 0xffff);
>>>> +
>>>> + adv7511->i2c_main = i2c;
>>>> + adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
>>>> + if (!adv7511->i2c_edid)
>>>> + return -ENOMEM;
>>>> +
>>>> + if (i2c->irq) {
>>>> + init_waitqueue_head(&adv7511->wq);
>>>> +
>>>> + ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
>>>> + adv7511_irq_handler,
>>>> + IRQF_ONESHOT, dev_name(dev),
>>>> + adv7511);
>>>> + if (ret)
>>>> + goto err_i2c_unregister_device;
>>>> + }
>>>> +
>>>> + /* CEC is unused for now */
>>>> + regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
>>>> + ADV7511_CEC_CTRL_POWER_DOWN);
>>>> +
>>>> + adv7511_power_off(adv7511);
>>>> +
>>>> + i2c_set_clientdata(i2c, adv7511);
>>>> +
>>>> +#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
>>>> + adv7511_audio_init(&i2c->dev);
>>>> +#endif
>>>
>>> If we intend to have more audio funcs being used by the core in the
>>> future, it would be nice to have NOP audio funcs rather than having
>>> multiple #ifdef checks in the driver when CONFIG_DRM_I2C_ADV7511_AUDIO
>>> isn't set.
>>>
>>
>> I will move this ifdef to adv751_audio and use NOP functions.
>
> Thanks, I think it should help in the longer run.
>
>>
>>>> +
>>>> + adv7511_set_link_config(adv7511, &link_config);
>>>> +
>>>> + /* Enable HDMI mode */
>>>> + regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
>>>> + ADV7511_HDMI_CFG_MODE_MASK,
>>>> + ADV7511_HDMI_CFG_MODE_HDMI);
>>>> +
>>>> + return 0;
>>>> +
>>>> +err_i2c_unregister_device:
>>>> + i2c_unregister_device(adv7511->i2c_edid);
>>>> +
>>>> + return ret;
>>>> +}
>>>> +
>>>> +static int adv7511_remove(struct i2c_client *i2c)
>>>> +{
>>>> + struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
>>>> +
>>>
>>> Are we missing a call to adv7511_audio_exit() here?
>>
>> I followed the code in Analog Devices tree where there is no call to
>> audio_exit() but indeed you are correct. I will add this call.
>>
>
> Since we have 3 files for adv7511 now, could we also move the driver
> to a separate folder? The long term plan is to convert all the i2c
> slave encoder drivers to bridges. Keeping them together would be nicer
> when we migrate this driver to the bridge folder.
Ok, will move to separate folder.
>
> Thanks,
> Archit
>
Best regards,
Jose Miguel Abreu
Powered by blists - more mailing lists