| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5276355.2bQYPXCpz6@avalon>
Date: Fri, 01 Apr 2016 20:10:14 +0300
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: dri-devel@...ts.freedesktop.org
Cc: Jose Abreu <Jose.Abreu@...opsys.com>,
linux-snps-arc@...ts.infradead.org, linux-kernel@...r.kernel.org,
alsa-devel@...a-project.org, devicetree@...r.kernel.org,
tixy@...aro.org, mark.rutland@....com, broonie@...nel.org,
Alexey.Brodkin@...opsys.com, lgirdwood@...il.com,
yitian.bu@...gramtek.com, wsa+renesas@...g-engineering.com,
laurent.pinchart+renesas@...asonboard.com,
nariman@...nsource.wolfsonmicro.com, Maruthi.Bayyavarapu@....com,
pawel.moll@....com, ijc+devicetree@...lion.org.uk,
Vineet.Gupta1@...opsys.com, buyitian@...il.com, perex@...ex.cz,
tiwai@...e.com, robh+dt@...nel.org, galak@...eaurora.org,
alexander.deucher@....com, CARLOS.PALMINHA@...opsys.com
Subject: Re: [PATCH 1/3 v2] drm/i2c/adv7511: Add audio support
Hi Jose,
Thank you for the patch.
On Monday 28 Mar 2016 15:36:09 Jose Abreu wrote:
> This patch adds audio support for the ADV7511 HDMI transmitter
> using ALSA SoC.
>
> The code was ported from Analog Devices linux tree from
> commit 1770c4a1e32b ("Merge remote-tracking branch
> 'xilinx/master' into xcomm_zynq"), which is available at:
> - https://github.com/analogdevicesinc/linux/
>
> The main core file was renamed from adv7511.c to adv7511_core.c
> so that audio and video compile into a single adv7511.ko module
> and to keep up with Analog Devices kernel tree.
>
> The audio can be disabled using menu-config so it is possible
> to use only video mode.
>
> The HDMI mode is automatically started at boot and the audio
> (when enabled) registers as a codec into ALSA.
>
> SPDIF DAI format was also added to ASoC as it is required
> by adv7511 audio.
>
> Signed-off-by: Jose Abreu <joabreu@...opsys.com>
> ---
>
> No changes v1 -> v2.
>
> drivers/gpu/drm/i2c/Kconfig | 11 +
> drivers/gpu/drm/i2c/Makefile | 2 +
> drivers/gpu/drm/i2c/adv7511.c | 1024 -------------------------------
> drivers/gpu/drm/i2c/adv7511.h | 41 ++
> drivers/gpu/drm/i2c/adv7511_audio.c | 310 +++++++++++
> drivers/gpu/drm/i2c/adv7511_core.c | 1005 ++++++++++++++++++++++++++++++
Please use git-format-patch -M to detect renames if you send a new version of
this series, it will help with review.
> include/sound/soc-dai.h | 1 +
> 7 files changed, 1370 insertions(+), 1024 deletions(-)
> delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
> create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
> create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c
[snip]
> diff --git a/drivers/gpu/drm/i2c/adv7511_core.c
> b/drivers/gpu/drm/i2c/adv7511_core.c new file mode 100644
> index 0000000..d54256a
> --- /dev/null
> +++ b/drivers/gpu/drm/i2c/adv7511_core.c
[snip]
> +static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id
> *id) +{
> + struct adv7511_link_config link_config;
> + struct adv7511 *adv7511;
> + struct device *dev = &i2c->dev;
> + unsigned int val;
> + int ret;
> +
> + if (!dev->of_node)
> + return -EINVAL;
> +
> + adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
> + if (!adv7511)
> + return -ENOMEM;
> +
> + adv7511->powered = false;
> + adv7511->status = connector_status_disconnected;
> +
> + ret = adv7511_parse_dt(dev->of_node, &link_config);
> + if (ret)
> + return ret;
> +
> + /*
> + * The power down GPIO is optional. If present, toggle it from active to
> + * inactive to wake up the encoder.
> + */
> + adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
> + if (IS_ERR(adv7511->gpio_pd))
> + return PTR_ERR(adv7511->gpio_pd);
> +
> + if (adv7511->gpio_pd) {
> + mdelay(5);
> + gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
> + }
> +
> + adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
> + if (IS_ERR(adv7511->regmap))
> + return PTR_ERR(adv7511->regmap);
> +
> + ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
> + if (ret)
> + return ret;
> + dev_dbg(dev, "Rev. %d\n", val);
> +
> + ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
> + ARRAY_SIZE(adv7511_fixed_registers));
> + if (ret)
> + return ret;
> +
> + regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
> + regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
> + packet_i2c_addr);
> + regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
> + adv7511_packet_disable(adv7511, 0xffff);
> +
> + adv7511->i2c_main = i2c;
> + adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
> + if (!adv7511->i2c_edid)
> + return -ENOMEM;
> +
> + if (i2c->irq) {
> + init_waitqueue_head(&adv7511->wq);
> +
> + ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
> + adv7511_irq_handler,
> + IRQF_ONESHOT, dev_name(dev),
> + adv7511);
> + if (ret)
> + goto err_i2c_unregister_device;
> + }
> +
> + /* CEC is unused for now */
> + regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
> + ADV7511_CEC_CTRL_POWER_DOWN);
> +
> + adv7511_power_off(adv7511);
> +
> + i2c_set_clientdata(i2c, adv7511);
> +
> +#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
> + adv7511_audio_init(&i2c->dev);
> +#endif
Shouldn't we condition this to the audio channel being somehow described in DT
? If a board doesn't route audio signals to the ADV7511 audio input, there's
no need to register an audio codec.
> +
> + adv7511_set_link_config(adv7511, &link_config);
> +
> + /* Enable HDMI mode */
> + regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
> + ADV7511_HDMI_CFG_MODE_MASK,
> + ADV7511_HDMI_CFG_MODE_HDMI);
> +
> + return 0;
> +
> +err_i2c_unregister_device:
> + i2c_unregister_device(adv7511->i2c_edid);
> +
> + return ret;
> +}
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists