linux-kernel - Re: [v4,1/1] powerpc/86xx: Add support for Emerson/Artesyn MVME7100

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20160516234147.GA22832@home.buserror.net>
Date:	Mon, 16 May 2016 18:41:47 -0500
From:	Scott Wood <oss@...error.net>
To:	Alessio Igor Bogani <alessio.bogani@...ttra.eu>
Cc:	Kumar Gala <galak@...nel.crashing.org>,
	linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org
Subject: Re: [v4,1/1] powerpc/86xx: Add support for Emerson/Artesyn MVME7100

On Wed, Apr 27, 2016 at 10:35:25AM +0200, Alessio Igor Bogani wrote:
> +		bcsr@4,0 {
> +			compatible = "artesyn,mvme7100-bcsr";
> +			reg = <4 0 0x10000>;
> +		};
> +
> +	       serial@5,1000 {
> +			cell-index = <2>;
> +			device_type = "serial";
> +			compatible = "ns16550";
> +			reg = <5 0x1000 0x100>;
> +			clock-frequency = <1843200>;
> +			interrupts = <11 1 0 0>;
> +		};

The "serial@5,1000" line has spaces where there should be tabs.  There
are several other instances of this in the patch.

Where did these cell-index values come from?  Why are they needed?

> +	};
> +
> +};

No blank line here.

> +	platform_ops.fixups = mvme7100_fixups;
> +
> +}

No blank line here.

> diff --git a/arch/powerpc/boot/ppcboot.h b/arch/powerpc/boot/ppcboot.h
> index 6ae6f90..7b758be 100644
> --- a/arch/powerpc/boot/ppcboot.h
> +++ b/arch/powerpc/boot/ppcboot.h
> @@ -43,7 +43,7 @@ typedef struct bd_info {
>  	unsigned long	bi_sramstart;	/* start of SRAM memory */
>  	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
>  #if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
> -	defined(TARGET_83xx)
> +	defined(TARGET_83xx) || defined(TARGET_MVME7100)
>  	unsigned long	bi_immr_base;	/* base of IMMR register */
>  #endif

Again, please use TARGET_86xx here rather than TARGET_MVME7100.

> @@ -69,7 +74,7 @@ config MPC8641
>  	select FSL_PCI if PCI
>  	select PPC_UDBG_16550
>  	select MPIC
> -	default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
> +	default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310 || GEF_PPC9A || MVME7100

Please wrap this long line.

-Scott