| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20160612121303.GE32690@shlinux2>
Date: Sun, 12 Jun 2016 20:13:03 +0800
From: Dong Aisheng <dongas86@...il.com>
To: Shawn Guo <shawnguo@...nel.org>
Cc: Dong Aisheng <aisheng.dong@....com>, linux-clk@...r.kernel.org,
anson.huang@....com, mturquette@...libre.com, sboyd@...eaurora.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 05/11] clk: imx: refine the powerup_set bit of clk-pllv3
On Sun, Jun 12, 2016 at 07:36:27PM +0800, Shawn Guo wrote:
> On Wed, Jun 08, 2016 at 10:33:34PM +0800, Dong Aisheng wrote:
> > There's a powerdown bit already, so let's change the name of
> > powerup_set bit to power_invert to reflects the power polarity
> > to make it less confusing.
> >
> > Signed-off-by: Dong Aisheng <aisheng.dong@....com>
> > ---
> > drivers/clk/imx/clk-pllv3.c | 14 +++++++-------
> > 1 file changed, 7 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
> > index eea2b1b3791e..3fdfb6d2cc71 100644
> > --- a/drivers/clk/imx/clk-pllv3.c
> > +++ b/drivers/clk/imx/clk-pllv3.c
> > @@ -29,8 +29,8 @@
> > * struct clk_pllv3 - IMX PLL clock version 3
> > * @clk_hw: clock source
> > * @base: base address of PLL registers
> > - * @powerup_set: set POWER bit to power up the PLL
> > - * @powerdown: pll powerdown offset bit
> > + * @powerdown: pll powerdown bit offset
>
> I think 'powerdown' is more confusing here. I prefer to rename it to
> something like 'power_mask' and keep 'powerdown' as it is.
>
I understand your point.
How about using power_bit and powerup_set?
* @power_bit: pll power bit offset
* @powerup_set: set power_bit to power up the PLL
Regards
Dong Aisheng
> Shawn
>
> > + * @power_invert: set powerdown bit to power up the PLL
> > * @div_mask: mask of divider bits
> > * @div_shift: shift of divider bits
> > *
> > @@ -40,7 +40,7 @@
> > struct clk_pllv3 {
> > struct clk_hw hw;
> > void __iomem *base;
> > - bool powerup_set;
> > + bool power_invert;
> > u32 powerdown;
> > u32 div_mask;
> > u32 div_shift;
> > @@ -55,7 +55,7 @@ static int clk_pllv3_wait_lock(struct clk_pllv3 *pll)
> > u32 val = readl_relaxed(pll->base) & pll->powerdown;
> >
> > /* No need to wait for lock when pll is not powered up */
> > - if ((pll->powerup_set && !val) || (!pll->powerup_set && val))
> > + if ((pll->power_invert && !val) || (!pll->power_invert && val))
> > return 0;
> >
> > /* Wait for PLL to lock */
> > @@ -76,7 +76,7 @@ static int clk_pllv3_prepare(struct clk_hw *hw)
> > u32 val;
> >
> > val = readl_relaxed(pll->base);
> > - if (pll->powerup_set)
> > + if (pll->power_invert)
> > val |= pll->powerdown;
> > else
> > val &= ~pll->powerdown;
> > @@ -91,7 +91,7 @@ static void clk_pllv3_unprepare(struct clk_hw *hw)
> > u32 val;
> >
> > val = readl_relaxed(pll->base);
> > - if (pll->powerup_set)
> > + if (pll->power_invert)
> > val &= ~pll->powerdown;
> > else
> > val |= pll->powerdown;
> > @@ -326,7 +326,7 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
> > pll->div_shift = 1;
> > case IMX_PLLV3_USB:
> > ops = &clk_pllv3_ops;
> > - pll->powerup_set = true;
> > + pll->power_invert = true;
> > break;
> > case IMX_PLLV3_AV:
> > ops = &clk_pllv3_av_ops;
> > --
> > 1.9.1
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@...ts.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> --
> To unsubscribe from this list: send the line "unsubscribe linux-clk" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists