| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <01a5728b-9ea7-3ccf-34e8-7602a654306b@ti.com>
Date: Thu, 8 Sep 2016 15:02:56 +0300
From: Grygorii Strashko <grygorii.strashko@...com>
To: Felipe Balbi <balbi@...nel.org>, Arnd Bergmann <arnd@...db.de>
CC: Peter Chen <hzpeterchen@...il.com>, Leo Li <pku.leo@...il.com>,
Russell King - ARM Linux <linux@....linux.org.uk>,
Catalin Marinas <catalin.marinas@....com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
Sekhar Nori <nsekhar@...com>,
lkml <linux-kernel@...r.kernel.org>,
Stuart Yoder <stuart.yoder@....com>,
Scott Wood <oss@...error.net>,
David Fisher <david.fisher1@...opsys.com>,
"Thang Q. Nguyen" <tqnguyen@....com>,
Alan Stern <stern@...land.harvard.edu>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH] usb: dwc3: host: inherit dma configuration from parent
dev
On 09/08/2016 02:00 PM, Felipe Balbi wrote:
>
> Hi,
>
> Arnd Bergmann <arnd@...db.de> writes:
>> On Thursday, September 8, 2016 12:43:06 PM CEST Felipe Balbi wrote:
>>> Arnd Bergmann <arnd@...db.de> writes:
>>>> On Thursday, September 8, 2016 11:29:04 AM CEST Felipe Balbi wrote:
>>>>>> If we do that, we have to put child devices of the dwc3 devices into
>>>>>> the platform glue, and it also breaks those dwc3 devices that don't
>>>>>> have a parent driver.
>>>>>
>>>>> Well, this is easy to fix:
>>>>>
>>>>> if (dwc->dev->parent) {
>>>>> dwc->sysdev = dwc->dev->parent;
>>>>> } else {
>>>>> dev_info(dwc->dev, "Please provide a glue layer!\n");
>>>>> dwc->sysdev = dwc->dev;
>>>>> }
>>>>
>>>> I don't understand. Do you mean we should have an extra level of
>>>> stacking and splitting "static struct platform_driver dwc3_driver"
>>>> in two so instead of
>>>>
>>>> "qcom,dwc3" -> "snps,dwc3" (usb_bus.sysdev) -> "xhci" (usb_bus.dev)
>>>>
>>>> we do this?
>>>>
>>>> "qcom,dwc3" -> "snps,dwc3" (usb_bus.sysdev) -> "dwc3-glue" -> "xhci" (usb_bus.dev)
>>>
>>> no
>>>
>>> If we have a parent device, use that as sysdev, otherwise use self as
>>> sysdev.
>>
>> But there is often a parent device in DT, as the xhci device is
>> attached to some internal bus that gets turned into a platform_device
>> as well, so checking whether there is a parent will get the wrong
>> device node.
>
> oh, that makes things more interesting :-s
>
>>>> That sounds a bit clumsy for the sake of consistency with PCI.
>>>> The advantage is that xhci can always use the grandparent device
>>>> as sysdev whenever it isn't probed through PCI or firmware
>>>> itself, but the purpose of the dwc3-glue is otherwise questionable.
>>>>
>>>> How about adding a 'compatible="snps,dwc3-pci"' property for the dwc3
>>>> device when that is created from the PCI driver and checking for that
>>>> with the device property interface instead? If it's "snps,dwc3"
>>>> we use the device itself while for "snps,dwc3-pci", we use the parent?
>>>
>>> Any reason why we wouldn't use e.g. dwc3-omap.dev as sysdev?
>>
>> That would be incompatible with the USB binding, as the sysdev
>> is assumed to be a USB host controller with #address-cells=<1>
>> and #size-cells=<0> in order to hold the child devices, for
>> example:
>>
>> / {
>> omap_dwc3_1: omap_dwc3_1@...80000 {
>> compatible = "ti,dwc3";
>> #address-cells = <1>;
>> #size-cells = <1>;
>> ranges;
>> usb1: usb@...90000 {
>> compatible = "snps,dwc3";
>> reg = <0x48890000 0x17000>;
>> #address-cells = <1>;
>> #size-cells = <0>;
>> interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
>> <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
>> <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
>> interrupt-names = "peripheral",
>> "host",
>> "otg";
>> phys = <&usb2_phy1>, <&usb3_phy1>;
>> phy-names = "usb2-phy", "usb3-phy";
>>
>> hub@1 {
>> compatible = "usb5e3,608";
>> reg = <1>;
>> #address-cells = <1>;
>> #size-cells = <0>;
>>
>> ethernet@1 {
>> compatible = "usb424,ec00";
>> mac-address = [00 11 22 33 44 55];
>> reg = <1>;
>> };
>> };
>> };
>> };
>>
>> It's also the node that contains the "phys" properties and
>> presumably other properties like "otg-rev", "maximum-speed"
>> etc.
>>
>> If we make the sysdev point to the parent, then we can no longer
>> look up those properties and child devices from the USB core code
>> by looking at "sysdev->of_node".
>
> this also makes things more interesting. I can't of anything other than
> having some type of flag passed via e.g. device_properties by dwc3-pci.c
> :-s
>
> It's quite a hack, though. I still think that inheriting DMA (or
> manually initializing a child with parent's DMA bits and pieces) is the
> best way to go. So we're back to of_dma_configure() and
> acpi_dma_configure(), right?
>
> But this needs to be done before dwc3_probe() executes. For dwc3-pci
> that's easy, but for DT devices, seems like it should be in of
> core. Below is, clearly, not enough but should show the idea:
>
> diff --git a/drivers/of/device.c b/drivers/of/device.c
> index fd5cfad7c403..a54610198946 100644
> --- a/drivers/of/device.c
> +++ b/drivers/of/device.c
> @@ -94,8 +94,12 @@ void of_dma_configure(struct device *dev, struct device_node *np)
> * Set default coherent_dma_mask to 32 bit. Drivers are expected to
> * setup the correct supported mask.
> */
> - if (!dev->coherent_dma_mask)
> - dev->coherent_dma_mask = DMA_BIT_MASK(32);
> + if (!dev->coherent_dma_mask) {
> + if (!dev->parent->coherent_dma_mask)
> + dev->coherent_dma_mask = DMA_BIT_MASK(32);
> + else
> + dev->coherent_dma_mask = dev->parent->coherent_dma_mask;
> + }
>
> /*
> * Set it to coherent_dma_mask by default if the architecture
>
>
I'd like to clarify few points here:
- the default dma_mask = DMA_BIT_MASK(32); assigned here to keep
backward compatibility with existing DT files at the moment when
of_dma_configure() has been introduced and it satisfies most of the cases
- if HW require specific DMA configuration then "dma-ranges" property have to be
defined and of_dma_configure() will take care of it just few lines down.
including parent-child case - as it will try to find "dma-ranes" prop in parent node
when called for child dev.
Personally, I think Arnd's approach should work, if the problem of selecting of proper
sysdev/dma_dev device will be solved.
Wouldn't it work if is_device_dma_capable() will be used?
For DT-case, the device DMA properties have to be configured from DT. So, now
there are 2 cases for dwc3:
1) dwc3-glue (of_dma)
|- dwc3 (of_dma)
|- xhci-plat (manual)
better to use dwc3-glue as sysdev, but can use dwc3 also
2) (arch/arm/boot/dts/ls1021a.dtsi)
|- dwc3 (of_dma)
|- xhci-plat (manual)
need to use dwc3 as sysdev
dwc3: probe()
if (!&pdev->dev->of_node)
legacy case - hard-code DMA props
dwc->sysdev = &pdev->dev;
else
dev = &pdev->dev;
do {
if (is_device_dma_capable(dev)) {
dwc->sysdev = dev;
break;
}
dev = dev->parent;
while (dev);
^this cycle can be limited in depth (2 for PCI)
if (!dwc->sysdev)
oops;
xhci_plat_probe:
do the same
Wouldn't above work for other cases PCI/ACPI?
--
regards,
-grygorii
Powered by blists - more mailing lists