Message-ID: <1477576198.2458.27.camel@hadess.net>
Date:   Thu, 27 Oct 2016 15:49:58 +0200
From:   Bastien Nocera <hadess@...ess.net>
To:     linux-input@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     Jiri Kosina <jikos@...nel.org>,
        Benjamin Tissoires <benjamin.tissoires@...hat.com>
Subject: [PATCH v1] HID: udraw: Add support for the uDraw tablet for PS3

This adds support for the THQ uDraw tablet for the PS3, as
4 separate device nodes, so that user-space can easily consume
events coming from the hardware.

Note that the touchpad two-finger support is fairly unreliable,
and a right-click can only be achieved with a two-finger tap
with the two fingers slightly apart (about 1cm should be enough).

Tested-by: Bastien Nocera <hadess@...ess.net>
Signed-off-by: Bastien Nocera <hadess@...ess.net>
---
 MAINTAINERS             |   6 +
 drivers/hid/Kconfig     |   7 +
 drivers/hid/Makefile    |   1 +
 drivers/hid/hid-core.c  |   1 +
 drivers/hid/hid-ids.h   |   3 +
 drivers/hid/hid-udraw.c | 478
++++++++++++++++++++++++++++++++++++++++++++++++
 6 files changed, 496 insertions(+)
 create mode 100644 drivers/hid/hid-udraw.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 33d7779..57f6bea 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12197,6 +12197,12 @@ S:	Maintained
 F:	Documentation/filesystems/udf.txt
 F:	fs/udf/
 
+UDRAW TABLET
+M:	Bastien Nocera <hadess@...ess.net>
+L:	linux-input@...r.kernel.org
+S:	Maintained
+F:	drivers/hid/hid-udraw.c
+
 UFS FILESYSTEM
 M:	Evgeniy Dushistov <dushistov@...l.ru>
 S:	Maintained
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index cd4599c..88c831e 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -861,6 +861,13 @@ config THRUSTMASTER_FF
 	  a THRUSTMASTER Dual Trigger 3-in-1 or a THRUSTMASTER Ferrari
GT
 	  Rumble Force or Force Feedback Wheel.
 
+config HID_UDRAW
+	tristate "THQ PS3 uDraw tablet"
+	depends on HID
+	---help---
+	  Say Y here if you want to use the THQ uDraw gaming tablet
for
+	  the PS3.
+
 config HID_WACOM
 	tristate "Wacom Intuos/Graphire tablet support (USB)"
 	depends on HID
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 86b2b57..d0d9b34 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -96,6 +96,7 @@ obj-$(CONFIG_HID_TIVO)		+= hid-tivo.o
 obj-$(CONFIG_HID_TOPSEED)	+= hid-topseed.o
 obj-$(CONFIG_HID_TWINHAN)	+= hid-twinhan.o
 obj-$(CONFIG_HID_UCLOGIC)	+= hid-uclogic.o
+obj-$(CONFIG_HID_UDRAW)		+= hid-udraw.o
 obj-$(CONFIG_HID_LED)		+= hid-led.o
 obj-$(CONFIG_HID_XINMO)		+= hid-xinmo.o
 obj-$(CONFIG_HID_ZEROPLUS)	+= hid-zpff.o
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 2b89c70..3611ec7 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -2086,6 +2086,7 @@ static const struct hid_device_id
hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UCLOGIC_TABLET_WP1062) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THQ,
USB_DEVICE_ID_THQ_PS3_UDRAW) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_YIYNOVA_TABLET) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UGEE_TABLET_81) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
USB_DEVICE_ID_UGEE_TABLET_45) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index cd59c79..4ff9ecc 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -955,6 +955,9 @@
 #define USB_VENDOR_ID_THINGM		0x27b8
 #define USB_DEVICE_ID_BLINK1		0x01ed
 
+#define USB_VENDOR_ID_THQ		0x20d6
+#define USB_DEVICE_ID_THQ_PS3_UDRAW	0xcb17
+
 #define USB_VENDOR_ID_THRUSTMASTER	0x044f
 
 #define USB_VENDOR_ID_TIVO		0x150a
diff --git a/drivers/hid/hid-udraw.c b/drivers/hid/hid-udraw.c
new file mode 100644
index 0000000..794aae5
--- /dev/null
+++ b/drivers/hid/hid-udraw.c
@@ -0,0 +1,478 @@
+/*
+ * HID driver for THQ PS3 uDraw tablet
+ *
+ * Copyright (C) 2016 Red Hat Inc. All Rights Reserved
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation,
and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include "hid-ids.h"
+
+MODULE_AUTHOR("Bastien Nocera <hadess@...ess.net>");
+MODULE_DESCRIPTION("PS3 uDraw tablet driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Protocol information from:
+ * http://brandonw.net/udraw/
+ * and the source code of:
+ * https://vvvv.org/contribution/udraw-hid
+ */
+
+/*
+ * The device is setup with multiple input devices to make it easier
+ * to handle in user-space:
+ * - the touch area which works as a touchpad
+ * - the tablet area which works as a touchpad/drawing tablet
+ * - a joypad with a d-pad, and 7 buttons
+ * - an accelerometer device
+ */
+
+enum {
+	TOUCH_NONE,
+	TOUCH_PEN,
+	TOUCH_FINGER,
+	TOUCH_TWOFINGER
+};
+
+enum {
+	AXIS_X,
+	AXIS_Y,
+	AXIS_Z
+};
+
+/* Accelerometer min/max values
+ * in order, X, Y and Z
+ */
+struct {
+	int min;
+	int max;
+} accel_limits[] = {
+	[AXIS_X] = { 0x1EA, 0x216 },
+	[AXIS_Y] = { 0x1EA, 0x216 },
+	[AXIS_Z] = { 0x1EC, 0x218 }
+};
+
+#define DEVICE_NAME "THQ uDraw Game Tablet for PS3"
+/* resolution in pixels */
+#define RES_X 1920
+#define RES_Y 1080
+/* size in mm */
+#define WIDTH  160
+#define HEIGHT 90
+#define PRESSURE_OFFSET 0x71
+#define MAX_PRESSURE (0xFF - PRESSURE_OFFSET)
+
+struct udraw {
+	struct input_dev *joy_input_dev;
+	struct input_dev *touch_input_dev;
+	struct input_dev *pen_input_dev;
+	struct input_dev *accel_input_dev;
+	struct hid_device *hdev;
+
+	/* The device's two-finger support is pretty unreliable, as
+	 * the device could report a single touch when the two fingers
+	 * are too close together, and the distance between fingers,
even
+	 * though reported is not in pixels, but in an arbitrary unit.
+	 *
+	 * We'll make do without it, and try to report the first touch
+	 * as reliably as possible.
+	 */
+	int last_one_finger_x;
+	int last_one_finger_y;
+	int last_two_finger_x;
+	int last_two_finger_y;
+};
+
+static int clamp_accel(int axis, int offset)
+{
+	axis = clamp(axis,
+			accel_limits[offset].min,
+			accel_limits[offset].max);
+	axis = (axis - accel_limits[offset].min) /
+			((accel_limits[offset].max -
+			  accel_limits[offset].min) * 0xFF);
+	return axis;
+}
+
+static int udraw_raw_event(struct hid_device *hdev, struct hid_report
*report,
+	 u8 *data, int len)
+{
+	struct udraw *udraw = hid_get_drvdata(hdev);
+	int touch;
+	int x, y, z;
+
+	if (len != 0x1B)
+		return 0;
+
+	if (data[11] == 0x00)
+		touch = TOUCH_NONE;
+	else if (data[11] == 0x40)
+		touch = TOUCH_PEN;
+	else if (data[11] == 0x80)
+		touch = TOUCH_FINGER;
+	else
+		touch = TOUCH_TWOFINGER;
+
+	/* joypad */
+	input_report_key(udraw->joy_input_dev, BTN_WEST, data[0] & 1);
+	input_report_key(udraw->joy_input_dev, BTN_SOUTH, data[0] &
2);
+	input_report_key(udraw->joy_input_dev, BTN_EAST, data[0] & 4);
+	input_report_key(udraw->joy_input_dev, BTN_NORTH, data[0] &
8);
+
+	input_report_key(udraw->joy_input_dev, BTN_SELECT, data[1] &
1);
+	input_report_key(udraw->joy_input_dev, BTN_START, data[1] &
2);
+	input_report_key(udraw->joy_input_dev, BTN_MODE, data[1] &
16);
+
+	x = y = 0;
+	switch (data[2]) {
+	case 0x0:
+		y = -127;
+		break;
+	case 0x1:
+		y = -127;
+		x = 127;
+		break;
+	case 0x2:
+		x = 127;
+		break;
+	case 0x3:
+		y = 127;
+		x = 127;
+		break;
+	case 0x4:
+		y = 127;
+		break;
+	case 0x5:
+		y = 127;
+		x = -127;
+		break;
+	case 0x6:
+		x = -127;
+		break;
+	case 0x7:
+		y = -127;
+		x = -127;
+		break;
+	default:
+		break;
+	}
+
+	input_report_abs(udraw->joy_input_dev, ABS_X, x);
+	input_report_abs(udraw->joy_input_dev, ABS_Y, y);
+
+	input_sync(udraw->joy_input_dev);
+
+	/* For pen and touchpad */
+	x = y = 0;
+	if (touch != TOUCH_NONE) {
+		if (data[15] != 0x0F)
+			x = data[15] * 256 + data[17];
+		if (data[16] != 0x0F)
+			y = data[16] * 256 + data[18];
+	}
+
+	if (touch == TOUCH_FINGER) {
+		/* Save the last one-finger touch */
+		udraw->last_one_finger_x = x;
+		udraw->last_one_finger_y = y;
+		udraw->last_two_finger_x = -1;
+		udraw->last_two_finger_y = -1;
+	} else if (touch == TOUCH_TWOFINGER) {
+		/* We have a problem because x/y is the one for the
+		 * second finger but we want the first finger given
+		 * to user-space otherwise it'll look as if it jumped.
+		 */
+		if (udraw->last_two_finger_x == -1) {
+			/* Save the position of the 2nd finger */
+			udraw->last_two_finger_x = x;
+			udraw->last_two_finger_y = y;
+
+			x = udraw->last_one_finger_x;
+			y = udraw->last_one_finger_y;
+		} else {
+			/* Offset the 2-finger coords using the
+			 * saved data from the first finger
+			 */
+			x = x - (udraw->last_two_finger_x
+				- udraw->last_one_finger_x);
+			y = y - (udraw->last_two_finger_y
+				- udraw->last_one_finger_y);
+		}
+	}
+
+	/* touchpad */
+	if (touch == TOUCH_FINGER || touch == TOUCH_TWOFINGER) {
+		input_report_key(udraw->touch_input_dev, BTN_TOUCH,
1);
+		input_report_key(udraw->touch_input_dev,
BTN_TOOL_FINGER,
+				touch == TOUCH_FINGER);
+		input_report_key(udraw->touch_input_dev,
BTN_TOOL_DOUBLETAP,
+				touch == TOUCH_TWOFINGER);
+
+		input_report_abs(udraw->touch_input_dev, ABS_X, x);
+		input_report_abs(udraw->touch_input_dev, ABS_Y, y);
+	} else {
+		input_report_key(udraw->touch_input_dev, BTN_TOUCH,
0);
+		input_report_key(udraw->touch_input_dev,
BTN_TOOL_FINGER, 0);
+		input_report_key(udraw->touch_input_dev,
BTN_TOOL_DOUBLETAP, 0);
+	}
+	input_sync(udraw->touch_input_dev);
+
+	/* pen */
+	if (touch == TOUCH_PEN) {
+		int level;
+
+		level = clamp(data[13] - PRESSURE_OFFSET,
+				0, MAX_PRESSURE);
+
+		input_report_key(udraw->pen_input_dev, BTN_TOUCH,
(level != 0));
+		input_report_key(udraw->pen_input_dev, BTN_TOOL_PEN,
1);
+		input_report_abs(udraw->pen_input_dev, ABS_PRESSURE,
level);
+		input_report_abs(udraw->pen_input_dev, ABS_X, x);
+		input_report_abs(udraw->pen_input_dev, ABS_Y, y);
+	} else {
+		input_report_key(udraw->pen_input_dev, BTN_TOUCH, 0);
+		input_report_key(udraw->pen_input_dev, BTN_TOOL_PEN,
0);
+		input_report_abs(udraw->pen_input_dev, ABS_PRESSURE,
0);
+	}
+	input_sync(udraw->pen_input_dev);
+
+	/* accel */
+	x = (data[19] + (data[20] << 8));
+	x = clamp_accel(x, AXIS_X);
+	y = (data[21] + (data[22] << 8));
+	y = clamp_accel(y, AXIS_Y);
+	z = (data[23] + (data[24] << 8));
+	z = clamp_accel(z, AXIS_Z);
+	input_report_abs(udraw->accel_input_dev, ABS_X, x);
+	input_report_abs(udraw->accel_input_dev, ABS_Y, y);
+	input_report_abs(udraw->accel_input_dev, ABS_Z, z);
+	input_sync(udraw->accel_input_dev);
+
+	/* let hidraw and hiddev handle the report */
+	return 0;
+}
+
+static int udraw_open(struct input_dev *dev)
+{
+	struct udraw *udraw = input_get_drvdata(dev);
+
+	return hid_hw_open(udraw->hdev);
+}
+
+static void udraw_close(struct input_dev *dev)
+{
+	struct udraw *udraw = input_get_drvdata(dev);
+
+	hid_hw_close(udraw->hdev);
+}
+
+static struct input_dev *allocate_and_setup(struct hid_device *hdev,
+		const char *name)
+{
+	struct input_dev *input_dev;
+
+	input_dev = devm_input_allocate_device(&hdev->dev);
+	if (!input_dev)
+		return NULL;
+
+	input_dev->name = name;
+	input_dev->phys = hdev->phys;
+	input_dev->dev.parent = &hdev->dev;
+	input_dev->open = udraw_open;
+	input_dev->close = udraw_close;
+	input_dev->uniq = hdev->uniq;
+	input_dev->id.bustype = hdev->bus;
+	input_dev->id.vendor  = hdev->vendor;
+	input_dev->id.product = hdev->product;
+	input_dev->id.version = hdev->version;
+	input_set_drvdata(input_dev, hid_get_drvdata(hdev));
+
+	return input_dev;
+}
+
+static bool udraw_setup_touch(struct udraw *udraw,
+		struct hid_device *hdev)
+{
+	struct input_dev *input_dev;
+
+	input_dev = allocate_and_setup(hdev, DEVICE_NAME " Touchpad");
+	if (!input_dev)
+		return false;
+
+	input_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
+
+	set_bit(ABS_X, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_X, 0, RES_X, 1, 0);
+	input_abs_set_res(input_dev, ABS_X, RES_X / WIDTH);
+	set_bit(ABS_Y, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_Y, 0, RES_Y, 1, 0);
+	input_abs_set_res(input_dev, ABS_Y, RES_Y / HEIGHT);
+
+	set_bit(BTN_TOUCH, input_dev->keybit);
+	set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+	set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+
+	set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
+	udraw->touch_input_dev = input_dev;
+
+	return true;
+}
+
+static bool udraw_setup_pen(struct udraw *udraw,
+		struct hid_device *hdev)
+{
+	struct input_dev *input_dev;
+
+	input_dev = allocate_and_setup(hdev, DEVICE_NAME " Pen");
+	if (!input_dev)
+		return false;
+
+	input_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
+
+	set_bit(ABS_X, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_X, 0, RES_X, 1, 0);
+	input_abs_set_res(input_dev, ABS_X, RES_X / WIDTH);
+	set_bit(ABS_Y, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_Y, 0, RES_Y, 1, 0);
+	input_abs_set_res(input_dev, ABS_Y, RES_Y / HEIGHT);
+	set_bit(ABS_PRESSURE, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_PRESSURE,
+			0, MAX_PRESSURE, 0, 0);
+
+	set_bit(BTN_TOUCH, input_dev->keybit);
+	set_bit(BTN_TOOL_PEN, input_dev->keybit);
+
+	set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
+	udraw->pen_input_dev = input_dev;
+
+	return true;
+}
+
+static bool udraw_setup_accel(struct udraw *udraw,
+		struct hid_device *hdev)
+{
+	struct input_dev *input_dev;
+
+	input_dev = allocate_and_setup(hdev, DEVICE_NAME "
Accelerometer");
+	if (!input_dev)
+		return false;
+
+	input_dev->evbit[0] = BIT(EV_ABS);
+
+	/* 1G accel is reported as ~256, so clamp to 2G */
+	set_bit(ABS_X, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_X, -512, 512, 0, 0);
+	set_bit(ABS_Y, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_Y, -512, 512, 0, 0);
+	set_bit(ABS_Z, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_Z, -512, 512, 0, 0);
+
+	set_bit(INPUT_PROP_ACCELEROMETER, input_dev->propbit);
+
+	udraw->accel_input_dev = input_dev;
+
+	return true;
+}
+
+static bool udraw_setup_joypad(struct udraw *udraw,
+		struct hid_device *hdev)
+{
+	struct input_dev *input_dev;
+
+	input_dev = allocate_and_setup(hdev, DEVICE_NAME " Joypad");
+	if (!input_dev)
+		return false;
+
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+
+	set_bit(BTN_SOUTH, input_dev->keybit);
+	set_bit(BTN_NORTH, input_dev->keybit);
+	set_bit(BTN_EAST, input_dev->keybit);
+	set_bit(BTN_WEST, input_dev->keybit);
+	set_bit(BTN_SELECT, input_dev->keybit);
+	set_bit(BTN_START, input_dev->keybit);
+	set_bit(BTN_MODE, input_dev->keybit);
+
+	set_bit(ABS_X, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_X, -127, 127, 0, 0);
+	set_bit(ABS_Y, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_Y, -127, 127, 0, 0);
+
+	udraw->joy_input_dev = input_dev;
+
+	return true;
+}
+
+static int udraw_probe(struct hid_device *hdev, const struct
hid_device_id *id)
+{
+	struct udraw *udraw;
+	int ret;
+
+	udraw = devm_kzalloc(&hdev->dev, sizeof(struct udraw),
GFP_KERNEL);
+	if (!udraw)
+		return -ENOMEM;
+
+	udraw->hdev = hdev;
+	udraw->last_two_finger_x = -1;
+	udraw->last_two_finger_y = -1;
+
+	hid_set_drvdata(hdev, udraw);
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		return ret;
+	}
+
+	if (!udraw_setup_joypad(udraw, hdev) ||
+	    !udraw_setup_touch(udraw, hdev) ||
+	    !udraw_setup_pen(udraw, hdev) ||
+	    !udraw_setup_accel(udraw, hdev)) {
+		hid_err(hdev, "could not allocate interfaces\n");
+		return -ENOMEM;
+	}
+
+	ret = input_register_device(udraw->joy_input_dev) ||
+		input_register_device(udraw->touch_input_dev) ||
+		input_register_device(udraw->pen_input_dev) ||
+		input_register_device(udraw->accel_input_dev);
+	if (ret) {
+		hid_err(hdev, "failed to register interfaces\n");
+		return ret;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW |
HID_CONNECT_DRIVER);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct hid_device_id udraw_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THQ,
USB_DEVICE_ID_THQ_PS3_UDRAW) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, udraw_devices);
+
+static struct hid_driver udraw_driver = {
+	.name = "hid-udraw",
+	.id_table = udraw_devices,
+	.raw_event = udraw_raw_event,
+	.probe = udraw_probe,
+};
+module_hid_driver(udraw_driver);
-- 
2.7.4

Powered by blists - more mailing lists