| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <586E15CA.6060002@samsung.com>
Date: Thu, 05 Jan 2017 18:45:46 +0900
From: Chanwoo Choi <cw00.choi@...sung.com>
To: Jaechul Lee <jcsing.lee@...sung.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Javier Martinez Canillas <javier@....samsung.com>
Cc: Andi Shyti <andi.shyti@...sung.com>, beomho.seo@...sung.com,
galaxyra@...il.com, linux-arm-kernel@...ts.infradead.org,
linux-input@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org
Subject: Re: [PATCH v2 3/4] arm64: dts: exynos: make tm2 and tm2e independent
from each other
Hi Andi,
I correct the my previous comment about ldo23 and ldo25
because I check the final schematic document, I worked
with wrong information of ldo23 and ldo25 on the patch[1].
[1] https://lkml.org/lkml/2016/11/3/61
I'll send the fix patch to you right now
after that you better to work for these patches.
On 2017년 01월 05일 18:13, Chanwoo Choi wrote:
> Hi,
>
> I add the some comment as following:
> - ldo23/25/31/38 have the different value between tm2 and tm2e.
> - The patch[1] was alread posted. I think you better to rebase this patch on patch[1].
> [1] https://patchwork.kernel.org/patch/9491769/
> - ("ARM64: dts: TM2: comply to the samsung pinctrl naming convention")
>
> I add detailed comments on below.
>
> On 2017년 01월 05일 17:27, Jaechul Lee wrote:
>> From: Andi Shyti <andi.shyti@...sung.com>
>>
>> Currently tm2e dts includes tm2 but there are some differences
>> between the two boards and tm2 has some properties that tm2e
>> doesn't have.
>>
>> That's why it's important to keep the two dts files independent
>> and put all the commonalities in a tm2-common.dtsi file.
>>
>> Signed-off-by: Andi Shyti <andi.shyti@...sung.com>
>> Signed-off-by: Jaechul Lee <jcsing.lee@...sung.com>
>> ---
>> .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1116 +++++++++++++++++++
>> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1138 +-------------------
>> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 2 +-
>> 3 files changed, 1136 insertions(+), 1120 deletions(-)
>> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> new file mode 100644
>> index 0000000..7ad0019
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>> @@ -0,0 +1,1116 @@
>> +/*
>> + * SAMSUNG Exynos5433 TM2 board device tree source
>> + *
>> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
>> + *
>> + * Device tree source file for Samsung's TM2 board which is based on
>> + * Samsung Exynos5433 SoC.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +/dts-v1/;
>> +#include "exynos5433.dtsi"
>> +#include <dt-bindings/clock/samsung,s2mps11.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +
>
> [snip]
>
>> +&hsi2c_0 {
>> + status = "okay";
>> + clock-frequency = <2500000>;
>> +
>> + s2mps13-pmic@66 {
>> + compatible = "samsung,s2mps13-pmic";
>> + interrupt-parent = <&gpa0>;
>> + interrupts = <7 IRQ_TYPE_NONE>;
>> + reg = <0x66>;
>> + samsung,s2mps11-wrstbi-ground;
>> +
>> + s2mps13_osc: clocks {
>> + compatible = "samsung,s2mps13-clk";
>> + #clock-cells = <1>;
>> + clock-output-names = "s2mps13_ap", "s2mps13_cp",
>> + "s2mps13_bt";
>> + };
>> +
>> + regulators {
>> + ldo1_reg: LDO1 {
>> + regulator-name = "VDD_ALIVE_0.9V_AP";
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <900000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo2_reg: LDO2 {
>> + regulator-name = "VDDQ_MMC2_2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo3_reg: LDO3 {
>> + regulator-name = "VDD1_E_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo4_reg: LDO4 {
>> + regulator-name = "VDD10_MIF_PLL_1.0V_AP";
>> + regulator-min-microvolt = <1300000>;
>> + regulator-max-microvolt = <1300000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo5_reg: LDO5 {
>> + regulator-name = "VDD10_DPLL_1.0V_AP";
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1000000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo6_reg: LDO6 {
>> + regulator-name = "VDD10_MIPI2L_1.0V_AP";
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1000000>;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo7_reg: LDO7 {
>> + regulator-name = "VDD18_MIPI2L_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo8_reg: LDO8 {
>> + regulator-name = "VDD18_LLI_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo9_reg: LDO9 {
>> + regulator-name = "VDD18_ABB_ETC_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo10_reg: LDO10 {
>> + regulator-name = "VDD33_USB30_3.0V_AP";
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo11_reg: LDO11 {
>> + regulator-name = "VDD_INT_M_1.0V_AP";
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1000000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo12_reg: LDO12 {
>> + regulator-name = "VDD_KFC_M_1.1V_AP";
>> + regulator-min-microvolt = <800000>;
>> + regulator-max-microvolt = <1350000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo13_reg: LDO13 {
>> + regulator-name = "VDD_G3D_M_0.95V_AP";
>> + regulator-min-microvolt = <950000>;
>> + regulator-max-microvolt = <950000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo14_reg: LDO14 {
>> + regulator-name = "VDDQ_M1_LDO_1.2V_AP";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo15_reg: LDO15 {
>> + regulator-name = "VDDQ_M2_LDO_1.2V_AP";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-always-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + ldo16_reg: LDO16 {
>> + regulator-name = "VDDQ_EFUSE";
>> + regulator-min-microvolt = <1400000>;
>> + regulator-max-microvolt = <3400000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo17_reg: LDO17 {
>> + regulator-name = "V_TFLASH_2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + };
>> +
>> + ldo18_reg: LDO18 {
>> + regulator-name = "V_CODEC_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo19_reg: LDO19 {
>> + regulator-name = "VDDA_1.8V_COMP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo20_reg: LDO20 {
>> + regulator-name = "VCC_2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + regulator-always-on;
>> + };
>> +
>> + ldo21_reg: LDO21 {
>> + regulator-name = "VT_CAM_1.8V";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo22_reg: LDO22 {
>> + regulator-name = "CAM_IO_1.8V_AP";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + };
>> +
>> + ldo23_reg: LDO23 {
>> + regulator-name = "CAM_SEN_CORE_1.2V_AP";
>> + regulator-min-microvolt = <1050000>;
>> + regulator-max-microvolt = <1200000>;
>
> ldo23_reg has the different value between tm2 and tm2e.
> - tm2 : name - CAM_SEN_CORE_1.2V_AP, max-microvolt :1200000
> - tm2e : name - CAM_SEN_CORE_1.025V_AP, max-microvolt :1050000
To check the final schematic document, ldo23 is used on both tm2 and tm2e without difference.
But, name is CAM_SEN_CORE_1.05V_AP
>
>> + };
>> +
>> + ldo24_reg: LDO24 {
>> + regulator-name = "VT_CAM_1.2V";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + };
>> +
>> + ldo25_reg: LDO25 {
>> + regulator-name = "CAM_SEN_A2.8V_AP";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + };
>
> ldo25 is only used on TM2 and has the different name between tm2 and tm2e.
> - tm2 : name - CAM_SEN_A2.8V_AP
> - tm2e : name - UNUSED_LDO15
To check the final schematic document, ldo25 is not used on both tm2 and tm2e.
[snip]
--
Best Regards,
Chanwoo Choi
Samsung Electronics
View attachment "cw00_choi.vcf" of type "text/x-vcard" (6 bytes)
Powered by blists - more mailing lists