[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <db5d21c2-b0e2-c9ec-1f15-460973fd23e3@cogentembedded.com>
Date: Tue, 14 Mar 2017 11:57:08 +0300
From: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
To: Bartosz Golaszewski <bgolaszewski@...libre.com>,
Tejun Heo <tj@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Neil Armstrong <narmstrong@...libre.com>,
Michael Turquette <mturquette@...libre.com>,
Kevin Hilman <khilman@...libre.com>,
Patrick Titiano <ptitiano@...libre.com>
Cc: linux-ide@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] ata: ahci: add support for DaVinci DM816 SATA
controller
Hello!
On 3/13/2017 7:36 PM, Bartosz Golaszewski wrote:
> This SATA controller is quite similar to the one present on the DA850
> SoC, but the PHY configuration is different and it supports two HBA
> ports.
>
> The IP suffers from the same PMP issue the DA850 does - if we enable
> PMP but don't use it - softreset fails. Appropriate workaround was
> implemented in this driver as well.
>
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
> ---
> drivers/ata/Kconfig | 9 +++
> drivers/ata/Makefile | 1 +
> drivers/ata/ahci_dm816.c | 200 +++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 210 insertions(+)
> create mode 100644 drivers/ata/ahci_dm816.c
>
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 70b57d2..7f59a7a 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -118,6 +118,15 @@ config AHCI_DA850
>
> If unsure, say N.
>
> +config AHCI_DM816
> + tristate "DaVinci DM816 AHCI SATA support"
Is it really DaVinci?
> + depends on ARCH_OMAP2PLUS
Especially if it depends on OMAP...
[...]
MBR, Sergei
Powered by blists - more mailing lists