[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAFp+6iG+PL_dY7JiiSAuLaFBzaykqO9XCP9f_Y4Odqdh4sf9gw@mail.gmail.com>
Date: Wed, 26 Jul 2017 20:33:46 +0530
From: Vivek Gautam <vivek.gautam@...eaurora.org>
To: Varadarajan Narayanan <varada@...eaurora.org>
Cc: Bjorn Helgaas <bhelgaas@...gle.com>,
"robh+dt" <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>, svarbanov@...sol.com,
kishon <kishon@...com>, Stephen Boyd <sboyd@...eaurora.org>,
fengguang.wu@...el.com, Wei Yongjun <weiyongjun1@...wei.com>,
linux-pci@...r.kernel.org,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>
Subject: Re: [PATCH v4 2/7] dt-bindings: phy: qmp: Add support for QMP phy in IPQ8074
On Fri, Jul 21, 2017 at 5:06 PM, Varadarajan Narayanan
<varada@...eaurora.org> wrote:
> IPQ8074 uses QMP phy controller that provides support to PCIe and
> USB. Adding dt binding information for the same.
>
> Signed-off-by: Varadarajan Narayanan <varada@...eaurora.org>
> ---
> Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> index 5d7a51f..82fe0c4 100644
> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> @@ -6,6 +6,7 @@ controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
>
> Required properties:
> - compatible: compatible list, contains:
> + "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074
> "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996,
> "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996.
>
> @@ -38,6 +39,8 @@ Required properties:
> "phy", "common", "cfg".
> For "qcom,msm8996-qmp-usb3-phy" must contain
> "phy", "common".
> + For "qcom,ipq8074-qmp-pcie-phy" must contain:
> + "phy", "phy_phy".
Actually the "common" reset for msm8996-qmp-usb3-phy is
usb3phy_phy_reset in the datasheets, which functions in a
similar fashion as this "phy_phy" reset. So may be we don't
need another name?
regards
Vivek
>
> - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
> - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
> @@ -63,6 +66,11 @@ Required properties for child node:
> - clock-output-names: Name of the phy clock that will be the parent for
> the above pipe clock.
>
> + For "qcom,ipq8074-qmp-pcie-phy":
> + - "pcie20_phy0_pipe_clk" Pipe Clock parent
> + (or)
> + "pcie20_phy1_pipe_clk"
> +
> - resets: a list of phandles and reset controller specifier pairs,
> one for each entry in reset-names.
> - reset-names: Must contain following for pcie qmp phys:
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists