[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ff3124e052defa1cc562847b6a65df37@sw-optimization.com>
Date: Wed, 02 Aug 2017 17:30:36 +0200
From: Eric Schwarz <eas@...optimization.com>
To: Alan Tull <atull@...nel.org>
Cc: Anatolij Gustschin <agust@...x.de>,
Lee Jones <lee.jones@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>,
Moritz Fischer <moritz.fischer@...us.com>,
linux-gpio@...r.kernel.org, linux-fpga@...r.kernel.org,
linux-usb@...r.kernel.org,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-fpga-owner@...r.kernel.org
Subject: Re: [PATCH 0/3] FPGA Manager support for FPP via FT232H FT245-FIFO
Hello Alan,
many thanks for your response.
Well, I am following the whole discussion from the very start and for my
taste it is too superficial - don't know whether this is the right
wording. Please get me right. We need some kind of implementation
specification or a sample way on how to implement stuff. At some point I
honestly lost track, thus I was asking for a summary so in the end the
result is what we want. If it is clear to everyone what shall be done it
should not be kind of a big deal to quickly sum it up which I/we would
highly appreciate.
Many thanks
Eric
Am 02.08.2017 16:16, schrieb Alan Tull:
> On Wed, Aug 2, 2017 at 6:36 AM, Eric Schwarz <eas@...optimization.com>
> wrote:
>
>> Dear all,
>>
>> DENX Software Engineering develops and brings this driver to mainline
>> on
>> behalf of us (ARRI*).
>>
>> Since there was a lot of discussion around this patch series I would
>> highly
>> appreciate if someone could sum up what needs to be changed in detail
>> in
>> order to get this driver into the mainline as I am used it from the
>> other
>> "line-by-line" reviews. I understood that the approach is not generic
>> enough
>> - please correct me if I am wrong on that point. We somehow need a
>> commitment that if we change it to another way that the whole
>> discussion
>> does not start from scratch.
>>
>> Many thanks
>> Eric
>
> Hi Eric,
>
> Patchwork collects all email response to patchsets posted on this
> mailing list [1] so that could be helpful for you here.
>
> Alan
>
> [1] https://patchwork.kernel.org/project/linux-fpga/list/?submitter=769
>
> * I am just writing from my private e-mail address since Outlook
> obviously
> renders all my mails as HTML despite what I am configuring.
>
> [1]... http://www.arri.com
>
> Am 06.07.2017 22:49, schrieb Anatolij Gustschin:
>
> This series adds support for fast passive parallel (FPP) Altera
> FPGA configuration using FTDI FT232H chip in FT245-FIFO mode.
> It has been used to configure Arria 10 FPGAs.
>
> Patch 1 adds an FT232H MFD driver with common functions that
> can be used for FT232H USB-GPIO/I2C/SPI master adapter drivers.
> Currently it is used for FT232H GPIO support (in patch 2) and
> for FT245 FIFO transfers in FPP FPGA manager driver in patch 3.
> Driver support for FT232H USB-I2C/SPI master adapters can be
> added later.
>
> Patch 2 adds a simple GPIO driver supporting four FT232H CBUS GPIOs.
>
> Patch 3 adds an FPGA Manager driver for Altera FPP FPGA configuration
> via FT232H FT245-FIFO interface.
>
> Anatolij Gustschin (3):
> mfd: Add support for FTDI FT232H devices
> gpio: Add FT232H CBUS GPIO driver
> fpga manager: Add FT232H driver for Altera FPP
>
> drivers/fpga/Kconfig | 7 +
> drivers/fpga/Makefile | 1 +
> drivers/fpga/ftdi-fifo-fpp.c | 569
> ++++++++++++++++++++++++++++++++++++++++++
> drivers/gpio/Kconfig | 11 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-ftdi-cbus.c | 251 +++++++++++++++++++
> drivers/mfd/Kconfig | 9 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/ftdi-ft232h.c | 470 ++++++++++++++++++++++++++++++++++
> include/linux/mfd/ftdi/ftdi.h | 71 ++++++
> 10 files changed, 1391 insertions(+)
> create mode 100644 drivers/fpga/ftdi-fifo-fpp.c
> create mode 100644 drivers/gpio/gpio-ftdi-cbus.c
> create mode 100644 drivers/mfd/ftdi-ft232h.c
> create mode 100644 include/linux/mfd/ftdi/ftdi.h
Powered by blists - more mailing lists