[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171003205305.zyazssrvm3boy7yb@workotop.localdomain>
Date: Tue, 3 Oct 2017 16:53:05 -0400
From: Damien Riegel <damien.riegel@...oirfairelinux.com>
To: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Cc: alsa-devel@...a-project.org, linux-kernel@...r.kernel.org,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>, kernel@...oirfairelinux.com
Subject: Re: [PATCH v2] ASoC: codecs: msm8916-wcd-analog: configure micbias
in mbhc setup
On Tue, Oct 03, 2017 at 09:42:18PM +0100, Srinivas Kandagatla wrote:
>
>
> On 03/10/17 14:27, Damien Riegel wrote:
> > The very first time a headset is plugged in, detection is unreliable
> > because bias hasn't been configured yet, it's done once a mechanical
> > insertion interrupt has been triggered, so following insertions (and
> > thus detections) are not affected.
> >
> > To fix the very first detection, the bias must also be configured in the
> > function that setup the MBHC. Move pm8916_wcd_setup_mbhc after
> > pm8916_mbhc_configure_bias to avoid a forward declaration.
> >
> > Signed-off-by: Damien Riegel <damien.riegel@...oirfairelinux.com>
> > ---
> > Changes in v2:
> > - squash the two patches in one patch only
>
> I do not see the squashed patches here??
> It looks like its just the first patch.
pm8916_mbhc_configure_bias is now called in pm8916_wcd_setup_mbhc. See
inlined comment.
> Thanks,
> srini
> >
> > sound/soc/codecs/msm8916-wcd-analog.c | 94 +++++++++++++++++++----------------
> > 1 file changed, 50 insertions(+), 44 deletions(-)
> >
> > diff --git a/sound/soc/codecs/msm8916-wcd-analog.c b/sound/soc/codecs/msm8916-wcd-analog.c
> > index f562f2d86907..71494e9dbdcb 100644
> > --- a/sound/soc/codecs/msm8916-wcd-analog.c
> > +++ b/sound/soc/codecs/msm8916-wcd-analog.c
> > @@ -443,50 +443,6 @@ static int pm8916_wcd_analog_enable_micbias_int1(struct
> > wcd->micbias1_cap_mode);
> > }
> > -static void pm8916_wcd_setup_mbhc(struct pm8916_wcd_analog_priv *wcd)
> > -{
> > - struct snd_soc_codec *codec = wcd->codec;
> > - u32 plug_type = 0;
> > - u32 int_en_mask;
> > -
> > - snd_soc_write(codec, CDC_A_MBHC_DET_CTL_1,
> > - CDC_A_MBHC_DET_CTL_L_DET_EN |
> > - CDC_A_MBHC_DET_CTL_MECH_DET_TYPE_INSERTION |
> > - CDC_A_MBHC_DET_CTL_MIC_CLAMP_CTL_AUTO |
> > - CDC_A_MBHC_DET_CTL_MBHC_BIAS_EN);
> > -
> > - if (wcd->hphl_jack_type_normally_open)
> > - plug_type |= CDC_A_HPHL_PLUG_TYPE_NO;
> > -
> > - if (wcd->gnd_jack_type_normally_open)
> > - plug_type |= CDC_A_GND_PLUG_TYPE_NO;
> > -
> > - snd_soc_write(codec, CDC_A_MBHC_DET_CTL_2,
> > - CDC_A_MBHC_DET_CTL_HS_L_DET_PULL_UP_CTRL_I_3P0 |
> > - CDC_A_MBHC_DET_CTL_HS_L_DET_COMPA_CTRL_V0P9_VDD |
> > - plug_type |
> > - CDC_A_MBHC_DET_CTL_HPHL_100K_TO_GND_EN);
> > -
> > -
> > - snd_soc_write(codec, CDC_A_MBHC_DBNC_TIMER,
> > - CDC_A_MBHC_DBNC_TIMER_INSREM_DBNC_T_256_MS |
> > - CDC_A_MBHC_DBNC_TIMER_BTN_DBNC_T_16MS);
> > -
> > - /* enable MBHC clock */
> > - snd_soc_update_bits(codec, CDC_D_CDC_DIG_CLK_CTL,
> > - DIG_CLK_CTL_D_MBHC_CLK_EN_MASK,
> > - DIG_CLK_CTL_D_MBHC_CLK_EN);
> > -
> > - int_en_mask = MBHC_SWITCH_INT;
> > - if (wcd->mbhc_btn_enabled)
> > - int_en_mask |= MBHC_BUTTON_PRESS_DET | MBHC_BUTTON_RELEASE_DET;
> > -
> > - snd_soc_update_bits(codec, CDC_D_INT_EN_CLR, int_en_mask, 0);
> > - snd_soc_update_bits(codec, CDC_D_INT_EN_SET, int_en_mask, int_en_mask);
> > - wcd->mbhc_btn0_released = false;
> > - wcd->detect_accessory_type = true;
> > -}
> > -
> > static int pm8916_mbhc_configure_bias(struct pm8916_wcd_analog_priv *priv,
> > bool micbias2_enabled)
> > {
> > @@ -534,6 +490,56 @@ static int pm8916_mbhc_configure_bias(struct pm8916_wcd_analog_priv *priv,
> > return 0;
> > }
> > +static void pm8916_wcd_setup_mbhc(struct pm8916_wcd_analog_priv *wcd)
> > +{
> > + struct snd_soc_codec *codec = wcd->codec;
> > + bool micbias_enabled = false;
> > + u32 plug_type = 0;
> > + u32 int_en_mask;
> > +
> > + snd_soc_write(codec, CDC_A_MBHC_DET_CTL_1,
> > + CDC_A_MBHC_DET_CTL_L_DET_EN |
> > + CDC_A_MBHC_DET_CTL_MECH_DET_TYPE_INSERTION |
> > + CDC_A_MBHC_DET_CTL_MIC_CLAMP_CTL_AUTO |
> > + CDC_A_MBHC_DET_CTL_MBHC_BIAS_EN);
> > +
> > + if (wcd->hphl_jack_type_normally_open)
> > + plug_type |= CDC_A_HPHL_PLUG_TYPE_NO;
> > +
> > + if (wcd->gnd_jack_type_normally_open)
> > + plug_type |= CDC_A_GND_PLUG_TYPE_NO;
> > +
> > + snd_soc_write(codec, CDC_A_MBHC_DET_CTL_2,
> > + CDC_A_MBHC_DET_CTL_HS_L_DET_PULL_UP_CTRL_I_3P0 |
> > + CDC_A_MBHC_DET_CTL_HS_L_DET_COMPA_CTRL_V0P9_VDD |
> > + plug_type |
> > + CDC_A_MBHC_DET_CTL_HPHL_100K_TO_GND_EN);
> > +
> > +
> > + snd_soc_write(codec, CDC_A_MBHC_DBNC_TIMER,
> > + CDC_A_MBHC_DBNC_TIMER_INSREM_DBNC_T_256_MS |
> > + CDC_A_MBHC_DBNC_TIMER_BTN_DBNC_T_16MS);
> > +
> > + /* enable MBHC clock */
> > + snd_soc_update_bits(codec, CDC_D_CDC_DIG_CLK_CTL,
> > + DIG_CLK_CTL_D_MBHC_CLK_EN_MASK,
> > + DIG_CLK_CTL_D_MBHC_CLK_EN);
> > +
> > + if (snd_soc_read(codec, CDC_A_MICB_2_EN) & CDC_A_MICB_2_EN_ENABLE)
> > + micbias_enabled = true;
> > +
> > + pm8916_mbhc_configure_bias(wcd, micbias_enabled);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Right here. I agree that it's quite easy to miss when most of the diff
is a function being moved, with only a few lines added into it.
Thanks,
--
Damien
> > +
> > + int_en_mask = MBHC_SWITCH_INT;
> > + if (wcd->mbhc_btn_enabled)
> > + int_en_mask |= MBHC_BUTTON_PRESS_DET | MBHC_BUTTON_RELEASE_DET;
> > +
> > + snd_soc_update_bits(codec, CDC_D_INT_EN_CLR, int_en_mask, 0);
> > + snd_soc_update_bits(codec, CDC_D_INT_EN_SET, int_en_mask, int_en_mask);
> > + wcd->mbhc_btn0_released = false;
> > + wcd->detect_accessory_type = true;
> > +}
> > +
> > static int pm8916_wcd_analog_enable_micbias_int2(struct
> > snd_soc_dapm_widget
> > *w, struct snd_kcontrol
> >
Powered by blists - more mailing lists